Unger UB000 TheBelt Tool Belt for Bucket-On-A-Belt Attachments

The Unger Rx restroom cleaning system is the first cleaning system designed by custodians to help them work faster, safer, and better than ever before. The system is comprised of three parts: an innovative restroom cart, advanced floor care tools, and best in class cleaning accessories. Once your cart has been fully assembled, stock the cart with all paper, soap, and any other refill items. The optional hanging storage module will keep these items clean, dry, and within reach. The Restroom Rx cart has specific clips, hooks, and holders to hold each tool of the cleaning system. Though some placement of where you put these tools on the cart are personal preference, when the cart is all set and ready to go, it should look something like this (0:54). The Restroom Rx system comes with two different swiveling brush tools, designed for deep cleaning on grouted surfaces. Each tool connects to the adjustable Ergo handle by pushing in the tab and locking it into place. The Pro Duster with sleeve is used for dusting higher areas of the restroom, including the tops of partitions and mirrors where hidden dust collects. The Ergo telescopic broom and dustpan are used to easily remove loose debris from floors before any scrubbing or mopping. The 18" Nifty Nabber is a tool used to grab items in tough to reach places, or items caught in toilets or urinals. The Ergo toilet bowl brush is used to get into hard to reach areas of the toilet bowls and urinals. The brush can be stowed away in its drip-free holder and hung back up on the cart. The Restroom Rx system comes with a 32 qt. split bucket and collapsible flat mop tool, which also connects to the ErgoTec handle. When locked, step on the release tab on the top of the mop frame. The frame unlocks and folds, allowing the mop to be dipped into the side press. The front chamber of the dual bucket is filled with the cleaning solution. The rear compartment below the wringer contains rinse water to clean off the mop. When it's time to wring out the mop and get new solution, the mop is inserted through the press into the rinse water, and dipped before it is wrung out. Then it's back to the cleaning solution; a light squeeze with the press, and you are ready to mop again. To begin mopping, simply drop the mop to the floor. The mop head will automatically lock into place. A quick-release drain on the back side of the rinsing compartment is used to dump dirty rinse water without dumping out the cleaning solution. When it's time to refill the bucket, the easy adapter hose can attach to most sinks for a simple and quick refill. The following instructions will take you step by step on how to properly clean a restroom using the Restroom Rx cleaning system and tools. Before getting started, always make it a habit to use personal protective equipment, such as gloves and goggles before you begin. Step 1: Remove debris—Using the Unger Nifty Nabber grabber, clean and remove any and all debris from toilets, urinals, and hard to reach areas in the restroom. Check all urinals and toilets to make sure they have been flushed. Step 2: Dispense cleaning solution—Spray cleaning solution inside and around all urinals, toilets, and sinks. Be sure to let the solution dwell for the proper time as recommended by the manufacturer before rinsing or wiping them down. Step 3: Replenish supplies—Replace all toilet seat covers, hand towels, and toilet tissue. Refill all soap dispensers and empty the trash cans. Step 4: Dust and spot clean—Using the Unger Pro Duster, dust off and spot clean hard to reach spots and high areas in the restroom, such as the tops of partitions. Remember to clean surfaces starting at the top and work your way down. Step 5: Sweep floor—Before mopping, clean all loose dirt, sand, and debris from the floors with the Ergo dustpan and broom. Remember to get all corners and hard to reach spots. Step 6: Clean Surfaces—For best results, spray a microfiber cloth with your cleaning solution of choice. Clean mirrors, fixtures, and door knobs. Wipe down surfaces previously sprayed down with cleaning solution, such as countertops and sinks. Step 7: Clean urinals and toilets—Clean inside urinals and toilets with the Unger Ergo toilet brush. Wipe down all surfaces that are still wet with disinfectant using a microfiber cloth. Step 8: Mop floor—Collapse the flat mop by stepping on the foot pedal located on the top of the mop frame. Dip through the back section of the bucket through the wringer into the rinse water. Then wring out the mop. Dip the mop into the cleaning solution and wring out the mop again. Simply drop the mop onto the floor to continue. Begin mopping in an S pattern starting from the back walls and edges of the restroom. After edges are mopped, continue mopping in an S pattern walking backward toward the door until completed.