Name: T&S B-5115-12-CRB8P DuraPull Pre-Rinse Unit with 1.07 GPM Sprayer and Add-On Workboard Faucet with 12" Swing Nozzle
Brand: T&S Brass and Bronze Works
SKU: 510B511512CR8P
Price: 1316.15 USD
Availability: LimitedAvailability

A T&S DuraPull pre-rinse faucet with a hose attachment.

$1,316.15/Each

Ships free with Plus

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Earn up to $39.48 back (3,948 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

Wall mount add-on faucet has 12" swing nozzle for optimal clearance
Pull-down valve features auto shut-off upon release
Sprayer offers ideal 1.07 GPM flow rate for rinsing dishes
Built with 30" flexible stainless steel hose
Features quarter-turn Cerama cartridges with check valves

UPC Code:400016246247

View all T&S Brass and Bronze Works Pre-Rinse Faucets

Quantity: 1/Each
Shipping Weight: 14 lb.
Hose Length: 30 Inches
Faucet Width: 8 5/8 Inches
Faucet Height: 11 15/16 Inches
Add-On Faucet: 12 Inches
Cartridge Type: Ceramic
Faucet Centers: 4 Inches
Features: Made in America
Finish: Chrome
Handle Type: Lever
Material: Brass
Mounting Style: Wall Mounted
Mounting Type: Workboard
Pre Rinse Unit Type: Pull-Down Assembly
Water Inlet Size: 1/2 Inches

Customer questions about this product

Can I get a spray valve with a higher flow rate (GPM)?

A: The maximum flow rate for all commercial pre-rinse spray valves produced after January 28, 2019 is 1.28 GPM – more specific regulations may apply based on the valve’s spray force in ounce-force (ozf).

Product Class 1 (5 ozf or less) – Max Flow Rate: 1 GPM
Product Class 2 (5.01 - 8 ozf) – Max Flow Rate: 1.2 GPM
Product Class 3 (over 8 ozf) – Max Flow Rate: 1.28 GPM

These regulations do not impact spray valves made before January 28, 2019, and are implemented by the US Department of Energy in an effort to improve energy conservation.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

How is the pre-rinse hose length measured?

Unless otherwise specified, the quoted hose length includes any grips or connectors at the end of the hose, so the actual working length of the hose may be slightly less than described. Please refer to the product's specsheet for more detailed dimensions.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

T&S Brass and Bronze Works B-5115-12-CRB8P Details

Enhance the efficiency of your dishwashing with this T&S B-5115-12-CRB8P pull down pre-rinse unit with 1.07 GPM sprayer and add-on faucet with 12" swing nozzle. Featuring the intuitive DuraPull system, this unit activates the water flow automatically whenever you need it - pull down on the hose to turn the water on, and let the hose retract to turn the water off. This eliminates the strain and discomfort that comes from constantly holding down a spray valve handle and reduces water waste.

The faucet comes with a 30" stainless steel hose for maximum flexibility, while the 1.07 GPM spray valve blasts away stubborn food debris. The add-on faucet is built with a convenient 12" swing nozzle and comes with a full-flow stream regulator outlet. Cerama cartridges with check valves use ceramic discs that won't wear down like the soft rubber parts found in most traditional compression cartridges, and the dual lever handles are made easily identifiable by color-coded indexes.

The EasyInstall 12" riser is designed with a lock nut and bushing that pop down into the faucet base, so that you only have to tighten the nut to secure the riser rather than threading it into the base. The 4" workboard centers come with 1/2" NPT male inlets, and tailpieces and nuts are included for optional 1/4" NPT connection. A 6" wall bracket provides extra support and ensures that your new unit can stand up to rigorous use!

Overall Dimensions:
Spout Length: 12"
Faucet Width: 8 5/8"
Faucet Height: 11 15/16"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Made in America
This item was made in the United States of America.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.