Mix & Match Discounts
Quantity Discounts

$81.66/Each

Ships free with Plus
Buy 1 - 4 $98.99/Each

Other Available Sizes:

  • 18-gauge type 304 stainless steel top shelf
  • Galvanized steel undershelf and legs with adjustable plastic bullet feet
  • Designed to fit in between two pieces of equipment
  • 4" backsplash helps prevent spills
  • Aluminum corner brackets on undershelf
Shipping:

Maximize your square footage with this Regency 30" x 12" 18-gauge 304 stainless steel equipment filler table.

This equipment filler table features a durable stainless steel top shelf to ensure a long service life in your busy commercial kitchen. It's perfect for filling in the gaps that are too small for a wider table, allowing you to make previously unusable space into a valuable asset. The 4" backsplash helps keep contents contained, while its undershelf offers a convenient storage solution, so you can keep everything you need close at hand for a streamlined operation. Assembly is simple using the included hardware.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

Narrow Profile

The narrow, 12" profile of this equipment filler table makes it the perfect choice for the spaces between two pieces of equipment. For example, many countertop units like small broilers or salamanders require side clearance, and that space is often unused, but you can take advantage of it thanks to this table! It's great for filling up any available space in your prep area that's currently being wasted.

18-Gauge Stainless Steel Top

This table features an 18-gauge type 304 stainless steel top shelf that can withstand years of heavy use to come.

4" Backsplash

A 4" backsplash helps protect your walls and floors from accidental spills that may occur throughout your busy work day.

Galvanized Steel Undershelf

The galvanized steel undershelf is great for storing essential supplies, and it resists corrosion for dependable use.

Aluminum Corner Brackets

This table's undershelf is supported by aluminum corner brackets for additional security.

Adjustable Bullet Feet

Adjustable plastic bullet feet allow you to level your table on uneven surfaces for the best possible stability.

Galvanized Steel Legs

This unit features galvanized steel legs to ensure stability and further corrosion resistance.

Ships Unassembled

This table ships unassembled to save you on shipping costs. An allen wrench and two set screws are included for easy assembly.

Watch More Videos

Regency Stainless Steel Gauge and Type Selections

The gauge and type of any stainless steel product can drastically change its use and application. Watch this video to learn more about Regency stainless steel!

Work Table Cut-Down Service

Don't settle for a work table that doesn't meet your needs; use our work table cut-down service instead! Watch this video to learn more about this service.

Regency Stainless Steel Work Table Assembly

Check out this video for step-by-step instructions on how to assemble your Regency stainless steel work table!

Regency offers stainless steel in a variety of gauges and types that correspond to different levels of strength and durability. By understanding the gauge and type, you can easily determine what equipment is best for your application. Regency stainless steel is available in three gauges: fourteen, sixteen, and eighteen. Gauge refers to the thickness of the metal, with the thickest being the lowest number, and therefore the strongest. That makes fourteen-gauge stainless steel thicker than sixteen- or eighteen-gauge stainless steel. This also means that fourteen-gauge is heavy-duty, sixteen-gauge is standard-duty, and eighteen-gauge is light-duty. Types of stainless steel include three-oh-four and four-thirty. Type refers to the chemical make-up of the material. Heavy- and standard-duty products are available in type three-oh-four stainless steel, as it contains both chromium and nickel for corrosion-resistance. Select light-duty products also come in type three-oh-four, while the rest are made with type four-thirty stainless steel. This type contains chromium and no nickel, offering less corrosion-resistance than type three-oh-four. Four-thirty stainless steel is also magnetic, which can be a nice added benefit while you're working. Once you determine the optimal gauge and type for your business, shop Regency for stainless steel equipment of all sizes and configurations.

Copy and paste the embed code above.
You can buy restaurant work tables in different widths, different lengths, different grades of stainless, and even with backsplashes of various heights. But buying a work table online didn’t offer the same flexibility when it came to a unit’s overall height, until now. If you need to add casters or bring a piece of equipment to a comfortable working height, the standard 34” height may not work for you. Don’t settle for just “getting by” with a standard table that doesn’t match your needs; customize its height to boost your operation’s efficiency! Once you select your table, height, and whether you want casters, we will carefully cut the table legs to the correct size. While this is something that some people will do with a hacksaw themselves, having our professionals do it will save you lots of time and give you a cleaner cut.

Copy and paste the embed code above.
Assembling Regency stainless steel work tables is quick and simple! Each table ships with a tabletop, undershelf, legs, and an allen wrench, plus two extra set screws. Place the tabletop upside down on a surface that won’t scratch it. Insert the legs into the tabletop gussets. You may need to loosen the set screw if one struggles to go in. Partially tighten the set screws—full tightening will come later. On each of the legs, mark the height where you’ll be installing your undershelf. In any foodservice application, the shelf should be at least six inches off the ground for food safety. Once marked, slide the shelf onto the legs and fully tighten all the set screws. Adjust the feet as needed to meet your height requirements or to compensate for uneven flooring. Flip the table over and peel off the protective film. Your work table is now ready to be used!

Copy and paste the embed code above.

Compare to Other Products

Overall Dimensions:
  • Length: 12 Inches
  • Width: 30 Inches
  • Height: 34 Inches
  • Work Surface Height: 30 Inches
  • Backsplash Height: 4 Inches

Resources and Downloads

Spec Sheet Specsheet Regency Tables & Sinks Stainless Steel Work Tables Assembly Instructions Regency LTD Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Customer Reviews

  • Overall User Rating: Regency 30" x 12" 18-Gauge 304 Stainless Steel Equipment Filler Table with Backsplash and Galvanized Undershelf

    4.9 stars from 25 reviews

    22
    3
    0
    0
    0

    People Talk About:

    table great space between fit perfect Filler tables little perfectly
    This table turned out to be the perfect solution for adding a small utility counter space to a tight line. It fit well between our range and the charbroiler setup we have on top a a chef base allowing for the base to have better air flow to the compressor. Assembly was a breeze since all that's needed comes with the kit. For the price its a great value, but don't expect this to be a top of the line heavy duty table. in all i would likely buy another one if needed
    Decent quality for the price. Would recommend this table for light duty only, as the stainless steel is thin; however, it is well priced for the quality.
    This table is exactly what I was looking for. Fits perfectly in my coffee cart. Was easy to assemble. Looking forward to use it for its purpose.
    I like this product very much and I am glad to buy it. Having stainless steel is an important feature. I think that this product is of very high quality.
    great filler table. if you need something bigger do not order this. it is meant to fill in a small tight spot. it works well for what I was using it for
    This work table is built with really good quality materials, fits perfect it is exactly what we where looking for I am very happy with this purchase
    I apparently left my review as a caption but I highly recommend this prep table! It is very high quality and for a great price.
    it's not the first time for me buying Regency tables, this one is good as expected, easy installation, sturdy and fits the space very well.
    Although not the highest quality stainless this small table is perfect. Its definitely a good value. My kitchen supplier quoted me over 3 times the price that webstaurant has it listed for.
    Perfect size to fit between my griddle and my fridge on my food trailer. It holds my Avantco Range perfectly. Super easy to assemble and install. I love that the lower shelf is adjustable.
    What a great little table this is it fit perfect where i wanted it and filled in the gap perfect. The price was really good too!
    It is hard to find out this size?but the webside offer some many different size we can choose ?It stands between griddle and fryer?and we can put all the sauce on top?Perfect?
    Excellent Filler Table! I love these little tables! Whoever thought of them, really did some critical thinking, because when you don't have them you get around without them, but once you do have them they open up so much space and since there's an under shelf it gives you twice the amount of space as before for storage! Excellent!
    I bought this table to fil in a little space in betweeny grill and service fridge and it firt perfectly small table but comes in very handy
    Perfect size to fit between our oven and range, to keep the over away from the heat of the range. Just large enough to fit tools on the top shelf and a few oils on the bottom shelf.
    The kitchen in our new rental is very tiny, so this was a great way to add a mobile island and get some usable counter space. Inspect your items carefully though upon arrival because the mail carrier dented ours pretty badly, but I opted out of the option for Webstaurant to replace it because it wasn’t their fault.
    I needed a skinny table to fit in between our stove and deep fryer and this fits perfectly and looks good and it’s easy to clean
    This table is a great inexpensive way to fill gaps in work table configurations. It is of reasonably good quality and is just as advertised.
    We purchased a new salad cart and it left a 12" space in our prep line. This table slid right in and finished off the line as if it were custom! Backsplash was the pivot point for purchase for us.
    Used to hold plates between equiptment and makes great use of the space. Feels like solid construction so I wouldn't recommend paying more for a different brand
    Great little filler table. Was looking for a small table to put between fryer and flat top for a little work area and this was perfect!! Great quality
    Regency 30" x 12" Stainless Steel Filler Tables are great to fill in spaces for stainless steel tables when you need a unit under 24" in width. These tables are heavy duty and built well.
    Sturdy table good craftsmanship, light but strong it fit perfectly in between my six burner range and the wall now I have a nice shelf to keep tasting spoons garnishes etc. we shipped in a pretty small box fast shipping together easily
    This is a great little filler table. We needed some extra countertop space but didn't have much room on our wall. This fit in just right!
    Regency 18 Gauge 304 Stainless Steel Equipment Filler Table - 30" x 12" with Backsplash and Undershelf this is nice and fits right and tight...

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it.

Login or Register