• Safety interlock systems
  • 6' flexible cord
  • 115V, 60Hz, single phase
  • Knit-Knife stainless steel blades
  • Consistent results
  • Low profile design allows meat to be inserted closer to the blades
  • Easy to clean aluminum housing
Condition: Outlet
Shipping:

You May Also Need

This is an outlet item
Any warranty information listed in the manual is void unless otherwise stated and we will not be able to accept any returns.
Return Policy

Please note that all items are sold as is, and all sales are final. To ensure that each product in WebstaurantStore Outlet will work correctly upon arrival, it is tested by an experienced technician prior to shipping. We recommend that you carefully read the product description, damage/use description, and other related product literature such as specification sheets and product manuals before placing your order.

Please inspect each item carefully when it arrives at your place of business. If you observe any damage not detailed in the description on this website that may have been caused during shipping, do not sign for the delivery and contact us ASAP.

Cart Policy

Because Outlet items sell quickly on a first-come, first-serve basis, simply placing the item in your shopping cart for checkout at a later time does not guarantee a "hold" on the item.

Warranty Policy

No Outlet products have a warranty unless otherwise specified. If the warranty is honored, it will be clearly noted in the description of the item. If you have any questions or concerns about a product even after reading the description and product literature, please contact us.

Hobart 403 & 403U Tenderizers

Hobart 403 & 403U Tenderizers

The following Operator Training video on the Hobart 403 and 403U Tenderizers, is a supplement to the Instruction Manual that came with your Tenderizer. If you have any questions concerning operation, please consult your manual. Your Hobart 403 or 403U Tenderizer is constructed and designed to give long satisfactory service, providing it is properly used and maintained. This training video will cover the general information about the unit, its operation, and cleaning and maintenance. The model 403 and 403U Tenderizers are designed to tenderize a variety of meat products. The Tenderizer consists of a set of roller units, which contain knives that knit together and tenderize pieces of meat as they pass through the blades. The model 403U Tenderizer is available for USDA inspected establishments and contains USDA approved hangers in the lift-out unit. Optional wide or narrow julienne knife lift-out units are available for the model 403. They are used to cut food products such as meats and cheeses into strips. Before we get into the operation of the Tenderizers, let's turn our attention to several points concerning safety. The safety devices incorporated in this machine must be in their correct operating position any time the machine is in service. Both the transparent guard and the motor housing must be in place. The pilot light will remain on when either the transparent guard or motor housing is removed and the switch is left on. The motor will start when the guard and housing have been replaced. Do not defeat any of the safety features. To operate the unit, first turn the switch to On. The pilot light will illuminate, indicating power is supplied to the machine. To tenderize meat, simply drop cuts into the top of the transparent guard and receive them at the bottom. Only boneless meat should be used. Choice or tender cuts should be run through several times at different angles. Less tender cuts should be run through several more times at different angles to increase tenderness. Pull out excess sinews to improve tenderness. Various combinations of different meat types may be blended together. This is accomplished by running the meat types through separately to tenderize, then together creating a firmly knit cut. Large slices should be under 3/4 of an inch thick. Warning: Unplug the unit before beginning any cleaning procedure. The machine should be thoroughly cleaned after each daily use or when changing meat types. Remove the transparent guard, release the hanger lock and remove the lift-out unit as shown (3:34). Separate the front and rear hanger assemblies of the lift-out unit and remove the strippers by raising each and sliding them out of the hanger. Warning: Knives are sharp. Exercise extreme caution when handling knives. Immerse the transparent guard and strippers, and when used, the optional julienne lift-out units, in a mild soap and warm water solution. Using the cleaning fork, which is supplied, remove any food particles from between the knives on each hanger assembly. Do not attempt to use the cleaning fork with the machine running. Immerse the hanger assemblies in the warm, soapy water and scrub them with a soft bristle brush. Rinse all components. Wipe the remainder of the machine with a clean, wet cloth. All components can be sanitized using an iodine based sanitizer solution. Note: Prior to reassembly, inspect for bent or broken blades. If a bone or other hard object is run through the Tenderizer, it may cause one or more of the blades to bend or break. If this occurs, do not operate the machine until the blade or blades have been straightened or replaced. Warning: Unplug the unit before beginning any maintenance procedure. Occasionally, remove, clean, and replace the stub shaft seals. Also, remove the motor housing and wipe the motor area periodically. Use the dipstick in the vent hole to check lubricant level annually. If the lubricant level isn't between the lines on the dipstick, contact the local Hobart service office. The motor is totally enclosed and requires no lubrication. Knives do not need to be razor sharp, however, if knives need to be sharpened or replaced, contact the local Hobart service office. This concludes Operator Training for the Hobart 403 and 403U Tenderizers. To obtain service and parts information concerning the Tenderizers, contact your local Hobart service office.

Copy and paste the embed code above.

Learn how to properly use and care for your Hobart 403 and 403U Tenderizers by watching this video.

Hobart 403-1 Specs
Length 19 5/8 Inches
Width 10 1/2 Inches
Height 21 7/16 Inches
Opening Length 7 7/8 Inches
Opening Width 1 3/8 Inches
Hertz 60 Hertz
Phase 1
Voltage 115
Blade Material Stainless Steel
Horsepower 1/2 HP
Power Type Electric
Type Meat Tenderizers

Hobart 403-1 Details

  • New; never used
  • Pins to mount the motor cover are bent; this does not affect performance
  • Motor cover is cracked on the inside where body is mounted
  • Technician tested
Tender, juicy meat starts with tenderizing techniques available exclusively through the Hobart 403-1 meat tenderizer. Using innovative Knit-Knife stainless steel blades to cut meat and, at the same time knit it so firmly together that it will cook as one solid steak, the Hobart 403-1 meat tenderizer ensures a consistent result every time.

Its lower profile design features cut-outs to allow meat to be inserted closer to the blades for faster, easier operation, while plastic guides inside its translucent guard reduce unintentional folding. The Hobart 403-1 meat tenderizer is the product to increase tenderizing output without generating employee fatigue.

To guarantee quick and easy cleaning after use, the Hobart 403-1 meat tenderizer features a burnished aluminum housing, a set of knife cleaning combs, and a lift out unit frame.

Overall Dimensions:
Length: 19 5/8"
Width: 10 1/2"
Height: 21 7/16"
Opening Length: 7 7/8"
Opening Width: 1 3/8"

Attention CA Residents: Prop 65 Warning

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for
Hobart 403-1

Hobart's Warranty Information Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Customer Reviews

  • Overall User Rating: Hobart 403-1 Meat Tenderizer with Knit Knife Blades - 1/2 hp Scratch and Dent

    5.0 stars from 3 reviews

    3
    0
    0
    0
    0

    People Talk About:

    best meat price tenderizer hands great fine excellent easy dream
  • Arrange by 
    excellent product, costumers are very happy with the item, as described, best brand on meat tenderizer, nice price, well protected on delivery, perfect for meat market
    This is hands down the best price you can find out there. Try ordering it straight from Hobart and you will pay more. A real fine tool.
    what a great meat tenderizer, really top of the line. if you want the best this is the way to go. works like a dream, and cleans up super easy. shipping is a bit pricey but worth it.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register