$272.49/Each
Ships free with PlusEarn up to $8.17 back (817 points)with a Webstaurant Rewards Visa® Credit Card
Product Overview
- Double gauge secondary draft regulator mounted on a metal panel for simple installation
- Includes all necessary hoses and connectors
- Regulates CO2 coming from the primary regulator, going to 2 kegs
- (2) 3/8" wall brackets for transition between keg jumper hose and trunkline connectors
- Includes a flow control inlet nipple filter
- Monitors pressure up to 60 PSI; pressure relief valve ensures safety by releasing at 51-53 PSI
- Forged brass, die cast regulator construction
- 3/8" outlet barbs with shut-off; extra inlet nipple included for pass through installation
- Quantity
- 1/Each
- Shipping Weight
- 6 lb.
- Features
- Made in America
- Type
- Regulator Panels and Panel Kits
Micro Matic 83215-PP Details
Get everything you need to successfully install a secondary CO2 regulator for your draft beer system with this Micro Matic 83215 double gauge secondary CO2 regulator panel kit! Not only does this kit include core components like the panel and regulator, but it comes with all of the necessary hoses and connectors as well. A metal panel makes installation on a walk in cooler wall a breeze and features 2 integrated 3/8" stainless steel wall brackets that act as a reliable transition between a keg jumper hose and trunkline connector. The regulator, meanwhile, allows you to safely and effectively control the flow of CO2 to 2 kegs in your draft beer system. If adjusting the pressure on the primary regulator that's attached to your CO2 tank is problematic, this secondary regulator connects to the primary unit via a gas hose so you can control the gas flow from right inside your walk in. It comes with a double gauge that has a 0-60 PSI range so you can quickly monitor the amount of CO2 flowing from your gas tank to each of your unique kegs. Regulating CO2 is key in providing guests with quality draft beer because if the pressure's too low, your beer may taste flat and if it's too high, the beer may pour with excessive foam.
The pressure on this forged brass regulator is easily adjusted by turning the set screw with a flathead screwdriver. It features (2) 3/8" outlets with a shut-off valve so you can quickly and easily stop gas flow and, for added safety and peace of mind, this model has an integrated pressure relief valve that stops the gas flow if pressure gets too high (at 51-53 PSI). An extra inlet nipple is included for your convenience, for simple pass through installation to additional panels. Models before 9/1/2021 include a PRV pull ring and models produced after will no longer have them. If you have any questions please reach out to a customer service rep.
Kit Includes:
- Panel
- Double gauge CO2 regulator
- (2) 3/8" ID stainless steel tailpieces
- (2) 3/8" barb nipples
- (2) 8' x 3/8" vinyl jumper hoses with stainless steel tailpieces
- (2) 8' x 5/16" gas hose
- Stepless gas clamps
- Neoprene washers
Overall Dimensions:
Width: 11"
Height: 9 1/2"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Made in America
This item was made in the United States of America.
UL Listed, US
This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.
Resources and Downloads for
Micro Matic 83215-PP
A PDF viewer is required to view this product's information. Download Adobe Acrobat software