$2,203.85/Each

Ships free with Plus

Earn up to $66.12 back (6,612 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.

Special Order Shipping

An estimated delivery date will be provided after placing the order

Product Overview

  • Heats water to 180 degrees Fahrenheit
  • 3.2 gallon storage capacity; Stainless steel tank
  • Comes with 6" legs
  • Includes temperature/pressure relief valve
  • Fiberglass insulation to prevent heat loss
  • Low-water cut-off to prevent element burnout
  • 480V, 1 Phase
UPC Code:400011643140

Hatco MC-11 480/1 Specs

Quantity
1/Each
Shipping Weight
48 lb.
Width
11 3/4 Inches
Depth
12 7/8 Inches
Height
18 1/2 Inches
Amps
13.7 Amps
Hertz
60 Hz
Phase
1 Phase
Voltage
480 Volts
Wattage
11 Kilowatts
Features
Made in America  NSF Listed
Flow Rate
65 - 114 GPH
Plug Type
Hardwire
Power Type
Electric
Tank Capacity
3.2 Gallons
Usage
Light Duty

Hatco MC-11 480/1 Details

The Hatco MC-11 Mini-Compact electric specialty booster water heater provides water at 180 degrees Fahrenheit for hot water sanitizing or point-of-use dispensing. The heater features a stainless steel tank with a storage capacity of 3.2 gallons and a fast recovery time. Made with a stainless steel front for aesthetic appeal, the other sides of the heater are powder-coated silver-gray, and the bottom and legs are black.

The water heater includes four 6" legs to get it up off the ground, fiberglass insulation to reduce heat loss and a temperature and pressure relief valve in case the water gets too hot or pressure reaches dangerous levels. The water heater also features a low-water cut-off system to prevent element burnout due to a low water condition.

Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty.

Overall Dimensions:
Width: 11 3/4"
Depth: 12 7/8"
Height (including legs): 18 1/2"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Can this booster water heater replace a primary water heater?

No, it is not designed for that purpose. This unit should only be used as a secondary water heater.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Listed, US & Canada

    UL Listed, US & Canada

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States and Canada.

  • NSF Listed

    NSF Listed

    This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

  • Hardwired

    Hardwired

    This product must be hardwired by a professional; it does not plug into a standard wall outlet.

Need Parts & Accessories?

Show replacement parts and accessories for Hatco MC-11 480/1 today!

Resources and Downloads for
Hatco MC-11 480/1

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.