Hatco C-9 Compact Booster Water Heater - 208V, 1 Phase, 9 kW

Hatco C-9 208/1 Details

The space saving Hatco C9 9 kW compact booster water heater has a 6 gallon capacity to provide plenty of hot final rinse water required to properly sanitize and flash-dry dishes and flatware.

The Hatco C9 electric booster heater is factory pre-plumbed and pre-wired with a calibrated immersion thermostat and high-temperature limit switch. Fiberglass insulation minimizes heat loss, while the stainless steel front panel and powder coated body provide long-lasting durability. Swing-away front panels with low-water cut-off, control fuses, and transformer allow quick access to probes and elements for easier servicing.

Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit.

Overall Dimensions & Specs:
Width: 13"
Depth: 20 3/4"
Height (including legs): 19 3/4"
Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 90 GPH
Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 52 GPH

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.