$1,728.65/Each

Ships free with Plus

Earn up to $51.86 back (5,186 points)with a Webstaurant Rewards Visa® Credit Card

Voltage: 480V

Special Order Shipping

An estimated delivery date will be provided after placing the order

Product Overview

  • For 15 or less square inch pot washing sinks
  • Stainless steel front, tank, and powder-coated body
  • Built-in electrical circuit protection
  • Maintains continuous suppply of sanitizing rinse water
  • Free-flow technology ensures responsive and efficient operation
  • Advanced electronic controls
  • Requires two, 2" diameter cutouts
  • 3 kW
UPC Code:400011007393

Hatco 3CS-3 480/1 Specs

Quantity
1/Each
Shipping Weight
24 lb.
Width
6 3/4 Inches
Depth
16 7/8 Inches
Height
12 5/8 Inches
Amps
6.3 Amps
Hertz
50/60 Hz
Phase
1 Phase
Voltage
480 Volts
Wattage
3 Kilowatts
Features
Made in America  NSF Listed
Plug Type
Hardwire
Type
Heaters / Sediment Filters

Hatco 3CS-3 480/1 Details

Keep a continuous supply of hot, sanitized rinse water available at all times with this Hatco 3CS-3 3 kW sanitizing potwashing sink heater! Perfect for kitchen warewashing areas with limited space, this sink heater works by drawing water from the sink's bowl into a reservoir, where the temperature is boosted to proper sanitizing levels. The water then moves to a second reservoir, which traps soil and sediment before the heated water is flushed back into the sink. This process helps speed up manual warewashing tasks and reduces the amount of chemicals needed, leading to consistently cleaner dishware and glassware.

Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the water heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit.

- Attaches easily to the bottom of 3 bowl pot washing sinks with included hardware

- Drain handle for easy emptying of reservoir after each use

- ECO (Energy Cut Off) system cuts power to heating elements if water temperature exceeds normal operating limits

- Stainless steel front, powder coated body

Overall Dimensions:
Left to Right: 6 3/4"
Front to Back: 16 7/8"
Height: 12 5/8"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:
  • NSF Listed

    NSF Listed

    This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • CE Listed

    CE Listed

    This product complies with the standards imposed by Conformance European (CE).

  • CSA, Canada

    CSA, Canada

    This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in Canada.

  • UL Listed, US

    UL Listed, US

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.

  • Hardwired

    Hardwired

    This product must be hardwired by a professional; it does not plug into a standard wall outlet.

Need Parts & Accessories?

Show replacement parts and accessories for Hatco 3CS-3 480/1 today!

Resources and Downloads for
Hatco 3CS-3 480/1

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.