Size: 10'
Product Overview
- Type 1 hood, extra depth for conveyor pizza ovens; short-cycle makeup air system
- Includes box-style hood canopy, exhaust fan, and supply fan for makeup air
- 18-gauge 430 stainless steel construction on all exposed surfaces
- For ceilings 10' or higher
- 115V direct-drive exhaust fan (1750 CFM), 115/230V make-up air supply fan (1400 CFM)
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
View All Items$18.49/Each
$136.99/Set
$384.99/Set
$206.99/Each
$206.99/Each
$69.99/Each
$69.99/Each
$539.00/Each
Keep your kitchen free of hazardous grease buildup with this Halifax PIZHO1072 package 10' x 72" type 1 commercial kitchen hood system.
This unit has extra depth compared to a traditional hood so that conveyor pizza ovens are fully covered. The hood removes the grease-laden vapors produced by your equipment and prevents them from accumulating in places where they could become a fire or sanitation hazard, leaving your kitchen clean and safe to use!
Made in America
This item was made in the United States of America.
UL Classified EPH
This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.
UL Listed, US
This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.
Hardwired
This product must be hardwired by a professional; it does not plug into a standard wall outlet.
Exceptional Ventilation
It is designed to use short cycle (also called compensating) makeup air, which introduces supply air into the front inside of the hood. By discharging the air into the hood instead of the room, you avoid blowing air down onto your staff as they cook, which is a common issue with PSP-style makeup air systems. The hood contains a 115V direct-drive exhaust fan designed for 1750 CFM, a 115/230V make-up air supply fan designed for 1400 CFM, and your choice of mount for each fan to prevent fire or sanitation hazards. This is vital in applications lacking fresh air to replace air exhausted by the hood to remove grease, smoke, and VOCs effectively.
Superior Construction
The hood uses (6) 20" x 20" baffle-type filters, and grease is collected in a trough that drains into a stainless steel cup for disposal. 18-gauge 430 stainless steel is used on all surfaces to provide excellent durability while the MIG-welded frame provides seamless, liquid-tight joints. The hood features a box-style canopy design to provide superior performance, and a 3" gap on the back of the hood provides clearance and protection for combustible walls where code requires.
Vital Illumination
4 pre-wired lights illuminate the equipment under your hood so that you can easily see what you're doing while cooking, and they require a 115V electrical connection to the junction box. This hood should be used in applications where the ceiling is 10' or taller. 6 hanger brackets are included to make installation easy. It must be hard-wired, cords and plugs are not included.
Customer Q&AAsk a Question
Kidde Systems use APC (Aqueous Potassium Carbonate) wet chemical fire suppression. The tank is typically exposed unless a cabinet is requested. They come pre-filled.
Ansul Systems use Ansulex wet chemical fire suppression. The tank is typically installed in a wall-mounted cabinet. They must be filled and charged.
Both systems meet UL300 standards, and will require a certified fire safety installer to hook up, test, and pass inspection.
Follow these simple steps to add a system to your hood!
1.) Choose whether you would like an Ansul Deluxe or Kidde fire suppression system for your hood, under the "Fire Suppression" dropdown. The Ansul Deluxe system includes the gas shut-off valve, enclosure, chemical, and nitrogen cartridge.
2.) A member of our team will reach out to gather more information about your application so that the fire suppression system can be configured correctly. The sooner you provide answers to these questions, the sooner we can proceed with your order!
3.) If our team has any additional questions or concerns based on the information provided, we will work with you to resolve them and find the correct fire suppression solution for your business.
Compare to Other Products
- Depth:
- 72 Inches
- Ceiling Height:
- 10' or Over
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Due to US DOT shipping regulations, we are unable to ship this product to Alaska, Hawaii, and international destinations. It is also ineligible for next day or second day shipping and cannot be returned. Please contact Customer Solutions prior to placing your order if you have any questions or concerns.
This product is considered hazardous under US DOT shipping regulations. Due to the hazardous shipping restrictions, this item requires a signature for delivery and cannot be returned. We are unable to ship this product to Alaska, Hawaii, and international destinations. It is also ineligible for next day or second day shipping. Please contact Customer Solutions prior to placing your order if you have any questions or concerns.
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Need Parts & Accessories?
Shop replacement parts and accessories for this item today!
Resources and Downloads
A PDF viewer is required to view this product's information. Download Adobe Acrobat software