Earn up to $204.87 back (20,487 points)with a Webstaurant Rewards Visa® Credit Card
Other Available Sizes:
- Type 1 hood for grease-producing equipment; BRP makeup air system
- Includes box-style hood canopy, exhaust fan, and supply fan for makeup air
- 18-gauge 430 stainless steel construction on all exposed surfaces
- For ceilings 10' or higher
- 115V direct-drive exhaust fan (2000 CFM), 115/230V untempered supply fan (1600 CFM)
- NAKS END_CAPS 84" Stainless Steel End Cap
- NAKS LEDLGT Replacement 12 Watt LED Light Bulb
- NAKS PWLGT Pre-Wired Canopy Hood Lighting Fixture with Tempered Globe
- NAKS VIBRATION_ISOLATOR Floor Mount Vibration Isolator for Utility Sets
- Steelton 20"(H) x 16"(W) x 2"(T) Stainless Steel Hood Filter
- Steelton 20"(H) x 20"(W) x 1 1/2"(T) Stainless Steel Hood Filter
- NAKS HM0250 UL Listed Electrical 1/2 hp Hood Fan Control for 1 Exhaust Fan and 1 Supply Fan, 115V
$1,049.00/EachOut Of Stock
- Halifax 421CURTFULL Full Side Curtains for Type 1 Box Hoods and Type 2 Heat Removal Hoods - 2/Set
Keep your kitchen free of hazardous grease buildup with this Halifax BRPHP848 Type 1 8' x 48" type 1 commercial kitchen hood system with BRP makeup air.
This unit is suitable for use over any equipment that has a surface operating temperature under 700 degrees Fahrenheit, and that is required by fire code to have a type 1 hood, including fryers, griddles, charbroilers, conveyor pizza ovens, or any equipment that produces grease during the cooking process. The hood removes the grease-laden vapors produced by your equipment and prevents them from accumulating in places where they could become a fire or sanitation hazard, leaving your kitchen clean and safe to use!
Made in America
This item was made in the United States of America.
This item meets the criteria established by the National Fire Protection Association for fire protection codes and standards.
This product must be hardwired by a professional; it does not plug into a standard wall outlet.
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
UL Classified EPH
This product complies with UL EPH standards and meets ANSI/NSF requirements.
Consistent Fresh Air Supply
This hood uses a BRP (back return plenum) makeup air system, which uses a channel in the back of the hood to introduce supply air into the room. It discharges air underneath the equipment to blowing air down onto your staff, unlike PSP-style makeup air systems. Makeup air is important to replace the air exhausted by the hood since your hood requires this replacement air to perform to specifications and remove grease, smoke, and VOCs effectively.
Powerful Exhaust Fan
This hood contains a 115V direct-drive exhaust fan designed for 2000 CFM, a 115/230V untempered supply fan designed for 1600 CFM, and your choice of a wall, flat roof, or pitched roof curb mount for each fan.
The hood uses (4) 20" x 20" and (1) 20" x 16" baffle-type filters made from stainless steel to provide durability and make cleaning easy. Grease extracted by the filter is collected in a grease trough, which drains into a stainless steel grease cup for disposal. 18-gauge 430 stainless steel is used on all exposed surfaces to give it excellent durability and cleanability, while the MIG-welded frame provides seamless, liquid-tight joints.
The hood features a box-style canopy design to provide superior performance. This model is also engineered with a 3" air gap on the back of the hood, which provides clearance and protection for combustible walls where code requires.
3 pre-wired lights illuminate the equipment under your hood so that you can easily see what you're doing while cooking, and they require a 115V electrical connection to the junction box. This hood should be used in applications where the ceiling is 10' or taller. 4 hanger brackets are included to make installation easy. It must be hard-wired, cords and plugs are not included.
Customer Q&AAsk a Question
Kidde Systems use APC (Aqueous Potassium Carbonate) wet chemical fire suppression. The tank is typically exposed unless a cabinet is requested. They come pre-filled.
Ansul Systems use Ansulex wet chemical fire suppression. The tank is typically installed in a wall-mounted cabinet. They must be filled and charged.
Both systems meet UL300 standards, and will require a certified fire safety installer to hook up, test, and pass inspection.
Follow these simple steps to add a system to your hood!
1.) Choose whether you would like an Ansul Deluxe or Kidde fire suppression system for your hood, under the "Fire Suppression" dropdown. The Ansul Deluxe system includes the gas shut-off valve, enclosure, chemical, and CO2 cartridge.
2.) A member of our team will reach out to gather more information about your application so that the fire suppression system can be configured correctly. The sooner you provide answers to these questions, the sooner we can proceed with your order!
3.) If our team has any additional questions or concerns based on the information provided, we will work with you to resolve them and find the correct fire suppression solution for your business.
- Length:8 Feet
- Depth:48 Inches
- Ceiling Height:10' or Over
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.Login or Register