FLAT Tech PX23 22 7/8" x 22 7/8" Auto Adjustable Dining Height Black Table Base

Seating guests at a wobbly table is an unimpressive welcome and sitting at one can be downright irritating! If you’re looking for new table bases, then look no further than FLAT Tech table bases. FLAT table bases eliminate the wobbles caused by uneven surfaces, improving your guests’ dining experience. FLAT Tech table bases use multi-award-winning hydraulic technology, that automatically stabilizes the table and maintains the stability no matter how many times the table is moved. The technology is located in the base of the table and requires no manual adjustment or maintenance. Just focus on serving your customers and the FLAT Tech table bases will keep your tables stable. Imagine pushing together tables for a large party of guests and being able to easily align the table tops in seconds. This flexibility is a reality with FLAT Tech and is an invaluable addition to any dining room. Simply lift or tilt the table tops to the same level to create a smooth alignment across the adjoining surfaces. No more stuffing unsightly napkins or wedges under tables. No more wasting time setting up unstable tables every day. And no more paying for bobbled beverages or spilt meals because of an uneven dining surface! FLAT Tech is a no-brainer for anyone who appreciates technology that does the work for you and does it well. Keep your customers happy by choosing between our 50 table base style options. Whether you choose a table base for use inside or out, FLAT Tech table bases ensure that your business is a welcoming place to sit and eat. So stop customer complaints about your tables once and for all by using tables bases from FLAT Tech. Want to stabilize your existing tables? Then check out FLAT Equalizers as an easy retrofittable solution for your business.

Hi, thanks for watching this base assembly video. I’m going to show you the simple steps to assemble a base correctly. First of all we’ve got the components in front of us. The first thing is that we’ve got an assembly instruction in the pack already for you. We take the rod, making sure that the nuts and washers are assembled in this order. Take the nut off, and this we now look to apply inside the top spider. Simple just to hold it with your finger, spin the rod in, until you feel the rod coming through the nut. Don’t over thread it as you don’t want it to come through higher than the level base plate. Turn it over, tighten the nut up, and using a wrench or spinner, tighten it up. This will increase the stability of the table, and stop any flexing within the post. Place it on the floor and do the top nut. Take hold of the post, you’ll notice there is a sticker; this is to be placed at the top of the base. If you look into the actual plate, you’ll see notches. What we’re going to do is we’re going to use the locater to actually locate the whole post correctly in the right attitude. So that’s now located, pick up the base, you’ll see the actual alignment here. Place it onto the actual post and rod. It’s not located correctly with the spider legs and base legs in alignment. Place the nut finger tight and using a socket or wrench tighten up, making sure there’s enough force to actually retain the whole assembly together. Don’t over tighten, because you may crack the castings with too much pressure. What we’re going to do now is assemble the technology, the pad inside the foot. Here we’ve got the pad, and what we’ve actually got is the Allen key supplied. We take the nuts out of the actual base, and then we place the pad inside the base of the table. So what we want to do now is assemble and secure the pad. Only finger tighten these nuts, you don’t want to over-tighten and crack the plastic of the actual leg itself. Sometimes you may find you need to exert a little bit of pressure, so literally just put your thumb behind and stretch, put the nut in, and tighten with the Allen key provided. Remember only finger tight, and there you have a fully assembled base. We now take the complete base to the table top making sure that the legs of the spider are aligned to the corner of the table on a square base. So here we have the leg inter-aligned to the corner. What we could do is draw a line to the corner, corner to corner, so that we can align the actual fixing points of the table. Then, using appropriate screws, fix the table top to the spider using all the fixing points that are available. So, we now have a complete base and a table top attached, and there you have it. The number one solution to wobbly tables. FLAT engineering stability.