Other Available Styles:

  • Perfect solution to uneven floors and wobbly tables
  • Automatically adjusts to any surface within seconds
  • Remains stable on any terrain
  • Allows you to align multiple tables perfectly
  • Taller, bar height design
  • Made of high-quality cast iron
  • Textured black finish
  • Holds table tops up to 26" square or 30" round

UPC Code:

400011879303

Condition:

New
Shipping:

Usually Ships in 1 Business Day
When will I receive my item?

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

FLAT Tech Table Demonstration

FLAT Tech Table Demonstration

What if you could improve your customer experience and profits at the same time? What if you could increase return business and make even better use of your existing space? If the customer experience and your brand reputation are important to your business, then welcome to FLAT technology. You might think you are looking at an ordinary table, but you’re not. You see, this table is really quite special. Because this table base is equipped with our award winning FLAT technology. FLAT solves two everyday problems. It automatically stabilizes and allows you to easily align table tops in a way that’s never been done before. Let me give you a demonstration. This is an ordinary table. The kind of table you’d find in a typical restaurant. What I’m going to do is place this wedge under the feet and to simulate an uneven surface. And there you have it, a very annoying, wobbly table. One of the common and costly complaints in the food service industry, worldwide. Now, let’s do the exact same thing, but this time, use a table fitted with FLAT technology. Flat is always on, constantly sensing and adjusting to the surface below. Now if I slide the table off the wedge, it stabilizes instantly and automatically. What’s more, FLAT allows you to perfectly align the table tops, a truly unique feature exclusive to FLAT. So when catering to larger groups, this makes pushing tables together as simple as pushing two tables together. Here’s what else FLAT brings to the table. It eliminates customer complaints about wobbly tables. Because your staff no longer spends time steadying tables, they work more efficiently, and you can generate new sales by using areas of your restaurant like the balcony, deck, patio, or even warped sections that aren’t used on your dining room floor. Whether it’s in one restaurant or across an entire chain, consistency and customer experience are critical. Wobbly and misaligned tables become a significant brand risk and fixing them becomes an enormous savings opportunity. So loose the napkins, bottle corks and coasters that are propping up your tables and damaging your brand. At FLAT, we make a full range of standard and bar height table bases. FLAT table bases are available nationwide. Call 1-855-999-3528 or visit www.FlatTech.com. With our technology, the world really can be flat.

Copy and paste the embed code above.

Improve customer experience and protect your brand by investing in FLAT Tech tables! With sensors that constantly adjust to the surface below, you can trust that your restaurant or bar will never have wobbly, misaligned tables again.

FLAT Tech Table Assembly

FLAT Tech Table Assembly

Hi, thanks for watching this base assembly video. I’m going to show you the simple steps to assemble a base correctly. First of all we’ve got the components in front of us. The first thing is that we’ve got an assembly instruction in the pack already for you. We take the rod, making sure that the nuts and washers are assembled in this order. Take the nut off, and this we now look to apply inside the top spider. Simple just to hold it with your finger, spin the rod in, until you feel the rod coming through the nut. Don’t over thread it as you don’t want it to come through higher than the level base plate. Turn it over, tighten the nut up, and using a wrench or spinner, tighten it up. This will increase the stability of the table, and stop any flexing within the post. Place it on the floor and do the top nut. Take hold of the post, you’ll notice there is a sticker; this is to be placed at the top of the base. If you look into the actual plate, you’ll see notches. What we’re going to do is we’re going to use the locater to actually locate the whole post correctly in the right attitude. So that’s now located, pick up the base, you’ll see the actual alignment here. Place it onto the actual post and rod. It’s not located correctly with the spider legs and base legs in alignment. Place the nut finger tight and using a socket or wrench tighten up, making sure there’s enough force to actually retain the whole assembly together. Don’t over tighten, because you may crack the castings with too much pressure. What we’re going to do now is assemble the technology, the pad inside the foot. Here we’ve got the pad, and what we’ve actually got is the Allen key supplied. We take the nuts out of the actual base, and then we place the pad inside the base of the table. So what we want to do now is assemble and secure the pad. Only finger tighten these nuts, you don’t want to over-tighten and crack the plastic of the actual leg itself. Sometimes you may find you need to exert a little bit of pressure, so literally just put your thumb behind and stretch, put the nut in, and tighten with the Allen key provided. Remember only finger tight, and there you have a fully assembled base. We now take the complete base to the table top making sure that the legs of the spider are aligned to the corner of the table on a square base. So here we have the leg inter-aligned to the corner. What we could do is draw a line to the corner, corner to corner, so that we can align the actual fixing points of the table. Then, using appropriate screws, fix the table top to the spider using all the fixing points that are available. So, we now have a complete base and a table top attached, and there you have it. The number one solution to wobbly tables. FLAT engineering stability.

Copy and paste the embed code above.

Keep your tables from wobbling by watching this FLAT Tech table assembly instruction video. Requiring only the most basic tools, you’ll have sturdy tables to be used for a variety of purposes every time!

Specs
Height 40 3/4 Inches
Diameter 22 Inches
Bar Height Yes
Post Diameter 3 Inches
Base Style Round
Color Black
Material Cast Iron

Steel
Self-Leveling Yes
Top Plate Size 13 Inches
Type Table Bases
Usage Indoor

Details

Capable of adapting to a wide variety of surface imperfections, this FLAT Tech CT-3014 22" bar height auto adjustable round black table base brings unmatched leveling abilities to your dining room, deck, or patio. With patented hydraulic technology including a specialized actuator device and undercarriage, this system allows you to simply set the table in place and walk away. Instead of requiring staff to spend several minutes manually adjusting individual feet, this base will level itself in just seconds. In addition, it will automatically adjust to changes in the floor when moved so you will never have a wobbly table again.

When seating a large number of guests together, you'll almost always need to align several tables, but if the tables don't line up exactly, you are left with an uneven ridge where they meet. With FLAT technology, every table is level and can be aligned perfectly with another to eliminate this issue.

This base offers the classic look prominent in many foodservice businesses with a textured black finish and cast iron construction that stands up to heavy use. Plus, the taller, bar height design of this table base allows for pairing with bar height chairs to add depth and variety to your business's atmosphere.

With its high-quality top plate and stronger structural tension rod, it is designed to securely hold table tops and provide outstanding support for your food and beverages. This table base is able to hold table tops up to 26" square or 30" round that have a maximum weight of 40 lb. To ensure that the FLAT technology continues to work efficiently, it is best not to exceed this table top size recommendation.

Overall Dimensions:
Diameter: 22"
Height: 40 3/4"
Post Diameter: 3"
Top Plate Size: 13"

Spec Sheet Specsheet Warranty Warranty Brochure Brochure

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register