Contact us for details

Ships free with Plus

Call 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)

Earn up to $469.86 back (46,986 points)with a Webstaurant Rewards Visa® Credit Card

Product Overview

  • Dual raised topping rails with jacketed design for better cooling
  • Accommodates up to (12) 1/3 food pans (sold separately), allows flush-mounting for better ergonomics
  • 17" cutting board provides ample prep space
  • Stainless steel interior back and bottom, exterior top and sides
  • 115V, 1/5 and 1/3 hp
UPC Code:400013940667
Shipping:Usually Ships in 9 Weeks
Delfield 18648PDLP Specs
Shipping Weight691 lb.
Width48 Inches
Depth35 3/4 Inches
Height53 3/4 Inches
Cutting Board Width48 Inches
Nominal Width 48 Inches
Cutting Board Depth17 Inches
Work Surface Height34 Inches
Amps10.1 Amps
Hertz60 Hertz
Phase1 Phase
Voltage115 Volts
1/3 Size Pan Capacity12 Pans
Access Type Doors
Capacity8.41 cu. ft.
Compressor Style Side / Rear Breathing
Door Style Swing
Door Type Solid
Features Made in America

NSF Listed
Installation Type Freestanding
Number of Doors1 Doors
Number of Shelves1 Shelves
Plug Type NEMA 5-20P
Refrigerant Type R-290
Refrigeration Type Liquid Jacket
Temperature Range33 - 41 Degrees F

Customer questions about this product

What kinds of pans can I use in my refrigerated prep table?
While various configurations combining traditional 1/3 size, 1/6 size, and other food pan sizes are possible, it's important to refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.
Does free shipping apply to this Delfield item if I am shipping it to a residential address?
No. The manufacturer charges a $96 fee for truck deliveries to a residential address. Please contact our Customer Solutions team prior to placing your order if you have any questions.
I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?
R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used as an eco-friendly refrigerant by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
Ask your own question!

Delfield 18648PDLP Details

This Delfield 18648PDLP 48" one door refrigerated pizza prep table with dual raised rails combines everything you need to make a high-quality pizza in one convenient place! Its stacked, dual raised rails offer storage space for up to (12) 1/3 size pans (sold separately) and also incorporate LiquiTec cooling technology, a unique system which works by using a permanently sealed fluid jacket to surround the pan, instead of relying on just refrigeration lines or cold air. This creates more contact points for more even cooling, fewer compressor cycles, and better energy efficiency than comparable cold wall style prep tables! This design also means that it can reach NSF7 standards with the pans mounted flush at the rail height, while competitor designs have to recess the pans in the rail to achieve this, forcing your employees to reach over and down into the rail and slowing down productivity.

The rail's refrigeration system operates independently of the table's refrigerated cabinet, and maintains temperatures between 33 and 41 degrees Fahrenheit. You can also easily control the rail refrigeration with a switch located on the front louver. It also features a generous work surface in front of the topping rail, and comes with a standard 17" wide cutting board.

This prep table boasts an 18-gauge stainless steel top and 22-gauge stainless steel sides to stand up to the rigor of day-to-day use, and its stainless steel hinged covers are removable for added convenience and efficiency in pizza production. The refrigerated base has an adjustable epoxy-coated wire shelf and plenty of space to keep extra toppings close at hand. It can maintain temperatures between 36 and 40 degrees Fahrenheit. For durability and easy cleaning, the interior sides and door frames are made of thermoformed ABS plastic. The interior back and bottom are made from stainless steel to provide durability where it counts.

1/5 and 1/3 hp compressors provide separate cooling for the base and rails, and they use environmentally friendly R-290 refrigerant to maintain food-safe holding temperatures. Independent expansion valves for the rail and base also allow better performance and efficiency compared to the capillary tube refrigeration systems found on many competitor models. High-density, foamed-in-place polyurethane insulation also contributes to outstanding temperature retention and efficiency in the most demanding environments. Four 4" casters allow for easy mobility. This refrigerated pizza preparation table requires a 115V electrical connection and comes with an 8' cord and plug.

Overall Dimensions:
Width: 48"
Depth: 35 3/4"
Height: 53 3/4"
Work Surface Height: 34"
Capacity: 8.41 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Listed

    UL Listed

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • UL Canada

    UL Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in Canada.

  • 5-20P


    This unit comes with a NEMA 5-20P plug.

Resources and Downloads for
Delfield 18648PDLP

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Equivalent Items 

Delfield 18648PDLV (Formerly)

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register