$6,956.00/Each

Contact us for details

Ships free with Plus

Call 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)

Why do we do this?

Earn up to $208.68 back (20,868 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.

Enter ZIP Code >

Usually Ships in 4 Weeks from manufacturer

Lead times vary based on manufacturer stock

Not eligible for expedited shipping

Product Overview

  • Top holds (6) 1/6 size pans plus (2) 1/2 size pans and (1) full size food pan (included)
  • Includes a 10" wide cutting board
  • Stainless steel front, sides, top, drawers, and grille
  • Cabinet features foamed-in-place polyurethane insulation
  • 1/4 hp; 115V; runs on R290 eco-friendly refrigerant
UPC Code:400010806614

Beverage-Air SPED48HC-18M-4 Specs

Quantity
1/Each
Shipping Weight
394 lb.
Width
48 Inches
Depth
38 3/8 Inches
Height
43 Inches
Cutting Board Width
48 Inches
Nominal Width
48 Inches
Cutting Board Depth
10 Inches
Amps
5 Amps
Hertz
60 Hertz
Phase
1 Phase
Voltage
115 Volts
1/6 Size Pan Capacity
18 Pans
Access Type
Drawers
Capacity
13.9 cu. ft.
Casters
With Casters
Color
Silver
Compressor Location
Rear Mounted
Compressor Style
Side / Rear Breathing
Construction
Stainless Steel and Aluminum
Features
Made in America
Horsepower
1/4 HP
Number of Drawers
4 Drawers
Plug Type
NEMA 5-15P
Refrigerant Type
R-290
Refrigeration Type
Air Cooled
Style
Counter Height
Temperature Range
33 - 40 Degrees F
Top Type
Mega Top
Type
Prep Refrigeration

Customer questions about this product

Does Beverage-Air warrant this item for use in a food truck?

This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.

How do I know if this unit will fit under or match the height of my ADA-height counter?

Many manufacturers offer their refrigeration equipment in several different height options to best meet your needs. Here's a breakdown of how we classify these different heights:

Counter Height: Work surface is more than 34" high; standard-height unit.

ADA Height: Work surface height is 34" or less; complies with ADA regulations.

Low Profile: Work surface height is less than 32"; designed to fit under most ADA-height counters.

If the unit you are purchasing does not have a flat top, such as a worktop or sandwich/salad prep table, it may affect whether or not it will align with certain countertops. To ensure that the product will meet your needs, please reference the product's literature and specifications.

I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?

R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program.

What does the “H” or “HC” mean in the newer Beverage-Air model numbers?

This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.

What kinds of pans can I use in my refrigerated prep table?

While various configurations combining traditional 1/3 size, 1/6 size, and other food pan sizes are possible, it's important to refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.

Ask your own question!

Beverage-Air SPED48HC-18M-4 Details

From the Elite series, the Beverage-Air SPED48HC-18M-4 48" mega top sandwich / salad prep table with four drawers is designed to keep your freshest toppings and ingredients close at hand at food-safe holding temperatures. Its high-capacity refrigeration system boasts an optimized airflow pattern that cools the pans from the bottom for more even temperature distribution and improved performance. The top section can hold up to six 1/6 size food pans plus two 1/2 size pans and one full size pan up to 4" deep. Each top heavy-duty drawer can hold 4" deep food pans, while the bottom drawers each hold 6" deep food pans (sold separately).

- 4" deep polycarbonate food pans included for top section

-Top section holds (6) 1/6 size pans plus (2) 1/2 size pans and (1) full size food pan (included); will also hold 1/9 size pans with additional adapter bars (sold separately)

-Top drawers each hold 4" deep food pans; bottom drawers each hold 6" deep food pans (sold separately)

-Cabinet insulated with CFC-free foamed-in-place polyurethane insulation for energy efficiency

-1/4 hp compressor eco-friendly R290 refrigerant

-Heavy duty 6" casters (2 locking), stainless steel top, sides, drawers and front grille

-Corrosion-resistant aluminum interior liner

-Insulated cover

-10" wide polyethylene cutting board is removable for easy cleaning

-13.9 cu. ft. total capacity

-115V

Overall Dimensions:
Left to Right: 48"
Front to Back: 38 3/8"
Height: 43"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • UL Classified, US & Canada

    UL Classified, US & Canada

    This product has been certified by the Underwriters Laboratories (UL) for safe use against a limited range of hazards or usage conditions, within applicable safety standards required for safe use in the United States and Canada.

  • UL Classified EPH

    UL Classified EPH

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.

  • UL Sanitation

    UL Sanitation

    This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).

  • UL Listed, US

    UL Listed, US

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.

  • Made in America

    Made in America

    This item was made in the United States of America.

Resources and Downloads for
Beverage-Air SPED48HC-18M-4

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.

Customer Reviews

Overall User Rating

5.0 stars from 1 review

Rated 5 out of 5 stars

1 reviews rated this 5 out of 5 stars.

0 reviews rated this 4 out of 5 stars.

0 reviews rated this 3 out of 5 stars.

0 reviews rated this 2 out of 5 stars.

0 reviews rated this 1 out of 5 stars.

Frequently Mentioned

  • described
  • exactly
  • great

Beverage-Air Customer Review from