Beverage-Air SPE60HC-16 Elite Series 60" 2 Door Refrigerated Sandwich Prep Table

Ships free with Plus

Start a Live Chat with a Customer Service rep to receive the price!
Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST.

Due to a manufacturer's price increase, this price will increase by 3% on 02/01/21

Beverage-Air SPE60HC-16 Elite Series 60" 2 Door Refrigerated Sandwich Prep Table Main Image 7

Other Available Styles:

Top holds (16) 1/6 size food pans (included)
Heavy-duty pan supports keep your pans securely in place
Two epoxy-coated wire shelves included per section
CFC and HCFC-free foamed-in-place polyurethane insulation
Insulated lid helps maintain safe food temperatures and optimal sanitation

Shipping:

View all Beverage-Air Commercial Sandwich / Salad Preparation Refrigerators

You May Also Need

Beverage-Air 705-392D-05 Equivalent 60" x 10" Composite Cutting Board

$182.99 / Each
Beverage-Air 705-290C-03 Equivalent 60" x 10" Cutting Board

$76.49 / Each
Beverage-Air 00B23-025D-01 (8) 16 oz. Bottle Organizer for SPE Standard and Cutting Top Prep Refrigerators

$74.49 / Each
Beverage-Air 00B23-026D-01 (6) 24 oz. Bottle Organizer for SPE Standard and Cutting Top Prep Refrigerators

$84.99 / Each

Create a seamless food prep system in your back-of-house area with this Beverage-Air SPE60HC-16 Elite Series 60" 2 door refrigerated sandwich prep table.

Perfect for your university, sub shop, hospital, or restaurant, this unit is a great way to streamline your prep process for making sandwiches, salads, and other treats. It's designed to keep your freshest toppings and ingredients close at hand and at food-safe holding temperatures. Built for heavy commercial use, this unit features a stainless steel front, sides, top, and doors. Its interior liner is made of aluminum for exceptional corrosion resistance and protection against rust. A 115V electrical connection is required for operation.

UL Classified EPH

This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL US & Canada

This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.
Made in America

This item was made in the United States of America.
UL Sanitation

This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
5-15P

This unit comes with a NEMA 5-15P plug.

Cutting Board

Boasting a 10" deep removable polyethylene cutting board, it's perfect for building your signature sandwiches, subs, and salads.

Top Rail Storage

The top rail holds (16) 1/6 size food pans (included), and it comes with heavy-duty pan supports that stay in place to prevent food spillage.

Wire Shelves

For additional refrigerated storage, four epoxy-coated wire shelves are included for the cabinet to keep your products well organized.

Eco-Friendly Design

The table's high-capacity refrigeration system with a 1/3 hp compressor and eco-friendly R290 refrigerant. This specialized refrigerant has an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally-responsible choice for your business.

Superior Insulation

To ensure temperature retention and optimal energy efficiency, the cabinet features CFC and HCFC-free foamed-in-place polyurethane insulation. The top rail lid is also insulated, so your ingredients can remain fresh when the table is not in use.

Casters Included

This model comes with heavy-duty 6" casters, 2 locking, in order to make it a breeze to move the cabinet. That way you can carry out your routine cleaning and maintenance system with ease.

Customer Q&A Ask a Question

How do I know if this unit will fit under or match the height of my ADA-Height counter?

Many manufacturers offer their refrigeration equipment in several different height options to best meet your needs. Here's a breakdown of how we classify these different heights:

Counter Height: Work surface is more than 34" high; standard height unit.

ADA Height: Work surface height is 34" or less; complies with ADA regulations.

Low Profile: Work surface height is less than 32"; designed to fit under most ADA-height counters.

If the unit you are purchasing does not have a flat top, such as a worktop or sandwich/salad prep table, it may affect whether or not it will align with certain countertops. To ensure that the product will meet your needs, please reference the product's literature and specifications.

I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?

R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used as an eco-friendly refrigerant by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.

What kinds of pans can I use in my refrigerated prep table?

While various configurations combining traditional 1/3 size, 1/6 size, and other food pan sizes are possible, it's important to refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.

What does the “H” or “HC” mean in the newer Beverage-Air model numbers?

This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.

Does Beverage-Air warrant this item for use in a food truck?

This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.

Beverage Air Refrigerated Food Prep Tables

Watch this video to learn about our great selection of Beverage Air Elite Series refrigerated prep tables. With a large number of sizes and configurations available, you'll be sure to find one that fits your needs.

Transcript Embed

Quickly prepare sandwiches and salads for your guests with Beverage Air's Elite Series refrigerated sandwich prep tables! Beverage-Air's Elite Series refrigerated prep tables are available in standard top, mega top, or cutting top configurations. Standard tops have two rows of pans, while mega tops have three rows for additional storage. Cutting top models feature an extra deep cutting board for additional prep space, making them great for large subs, tossing salads, and even rolling out pizza dough. For optimal convenience, these prep tables come in a variety of widths, ranging from 27" to 72". Plus, you can choose between doors, drawers, or a combination of both depending on your storage needs. Units with doors come with shelves for storage flexibility, while drawers are great for keeping extra pans close by. Top and bottom drawers accommodate up to 6” deep food pans. We even offer special models that come with sneeze guards, glass lids, or a dual-sided design. Featuring a durable stainless steel front, sides, and top, Elite Series refrigerated prep tables are perfect for busy operations. Plus, an aluminum interior lining offers excellent corrosion resistance and protection against rust, helping maintain prime performance and appearance over time. These units use environmentally friendly R290 refrigerant, making them a responsible choice for your business. We also offer models that stand lower than 34" to comply with ADA regulations. Like all Beverage-Air equipment, these refrigerated sandwich prep tables are tested for a 100-degree Fahrenheit ambient class, delivering unbeatable performance.

Overall Dimensions:

Width: 60 Inches
Depth: 29 1/4 Inches
Height: 41 11/16 Inches
Work Surface Height: 36 1/8 Inches
Capacity: 17.1 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

.warning__text__p { display: none; }

Attention CA Residents: Prop 65 Warning This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Need Parts & Accessories?

View replacements or accessories for
Beverage-Air SPE60HC-16

Resources and Downloads for
Beverage-Air SPE60HC-16

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Resources

Beverage-Air SPE60HC-16 Specs
Width	60 Inches
Depth	29 1/4 Inches
Height	41 11/16 Inches
Nominal Width	60 Inches
Work Surface Height	36 1/8 Inches
Amps	9.6 Amps
Hertz	60 Hertz
Phase	1 Phase
Voltage	115 Volts
1/6 Size Pan Capacity	16 Pans
Access Type	Doors
Capacity	17.1 cu. ft.
Casters	Yes
Compressor Location	Bottom Mounted
Compressor Style	Side / Rear Breathing
Door Style	Swing
Door Type	Solid
Hinge Location	Left/Right
Horsepower	1/3 HP
Made in America	Yes
Number of 1/6 Size Pans Included	16 Pans
Number of Doors	2
Number of Shelves	2
Refrigerant Type	R-290
Refrigeration Type	Air Cooled
Style	Counter Height
Top Type	Standard Top

Equivalent Items

Beverage-Air SPE60-16 (Formerly)

Other Products from this Line

Customer Reviews

Overall User Rating: Beverage-Air SPE60HC-16 Elite Series 60" 2 Door Refrigerated Sandwich Prep Table
3.5 stars from 2 reviews
1
0
0
1
0
People Talk About:
pans units food stations lids sealed bought brand door great
Arrange by
We have purchase several of these units and the quality is great. The customer service is exceptional as well if you ever have a a problem.

Billy N. from Hand Cut Steaks on 09/01/2020
I purchased this brand because they have a good reputation for high quality refrigeration. I am very disappointed, The lid is bowing and does not seal properly. The gaskets don't sit flush with the door allowing food to get stuck between them and the door. They have sealed areas for the food pans sitting on top and locking separating bars holding the pans. This all sounds great but creates many crevices, nooks and crannies for food to get stuck. It also means you can't use deeper pans or easily customize the pan configuration (I did know this when I bought them but wanted to make sure people looking into new units do too). The way the lids are situated on the station also makes getting into the back area difficult. Overall it is challenging to keep these stations clean. These stations are also not compatible with standard over shelf kits. I bought this size and a 48". The 60" requires a fan to keep the compressor cool which is very loud for a brand new unit. They DO keep the food at temp very well and look nice. Writing this review because I wish someone had provided this type of information when i was researching new units. Read Less Read More

Melissa C. from Verbena on 05/18/2019

Thank you for your feedback! We’re sorry you did not prefer this product. For recommendations, please contact our Customer Solutions team.

WebstaurantStore Customer Solutions