Ships free with Plus

or enter your email to be instantly sent the price!

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST

Earn up to $166.86 back (16,686 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.  Enter ZIP Code >

Product Overview

  • Holds (2) 1/2 size kegs
  • Two all-stainless steel taps and antimicrobial tubing allow for use with wine, beer, and coffee
  • Durable, steel construction with a stainless steel finish
  • Insulated with CFC- and HCFC-free, foamed-in-place polyurethane
  • Uses R290 refrigerant to maintain a temperature range of 36 to 38 degrees Fahrenheit
UPC Code:400010807833
Shipping:Usually Ships in 2-3 Months

Store and serve the coldest beer in town, thanks to this Beverage-Air DD48HC-1-S double tap kegerator beer dispenser.

Add efficiency to your beverage service with this Beverage-Air kegerator beer dispenser. It holds up to (2) 1/2 kegs and is the perfect solution for busy bars, pubs, and restaurants to serve guests quickly. Plus, the attractive steel construction with a stainless steel finish promotes a polished professional appearance and provides long-lasting use.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Classified EPH

    UL Classified EPH

    This product complies with UL EPH standards and meets ANSI/NSF requirements.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

Convenient Door Design

Self-closing doors with magnetic gaskets ensure the doors seal tightly each and every time to keep kegs at the proper temperature. This unit also comes equipped with standard door locks to keep your inventory secure after hours and between keg replacements.

Tap Tower

This unit comes with (1) double tap tower to make it easy to fill pint glasses and pitchers with local microbrews, international macrobrews, and everything inbetween. 3 in 1 all stainless steel tower design and antimicrobial tubing is capable of serving beer, wine, or coffee without the need to retrofit later! The insulated dispensing tower is designed and adapted to have a continuous source of cold air channeled in to keep beer at its coldest form up to the minute it is dispensed.

Drip Tray

The included drip tray helps contain liquids for a clean, mess-free operation so you don't have to worry about drips and spills during service.

Includes Manifold

This unit comes with the manifold and beer lines so that you can easily set up this model for use in your commercial business.

Environmentally-Safe Refrigerant

This beer dispenser's 1/4 hp compressor uses R290 refrigerant to maintain a temperature range of 33 to 38 degrees Fahrenheit. The specialized refrigerant has an ozone depletion (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally-responsible choice for your business.

Customer Q&AAsk a Question

Can I order this beer dispenser with a customized number of taps?
Yes, Beverage Air offers a variety of customization options that you can choose from to best suit your needs. Please contact [email protected] with any questions you may have.
Does adding optional accessories impact the lead time on this product?
Yes. If optional accessories are added to this product, this product may require additional lead time. If you have any questions prior to ordering please contact Customer Solutions.
What does the “H” or “HC” mean in the newer Beverage-Air model numbers?
This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
What size CO2 tank do I need for this beer dispenser?
The size of the CO2 tank you choose will be determined by the size of your beer dispenser unit and how often you are willing to refill the tank. Larger tanks will last longer than smaller tanks, but frequency and usage should also be taken into consideration. If you plan to store your CO2 tank inside the beer dispenser, then size will be a factor here since you will also need enough room to properly store your kegs. Your local beer supplier will be able to offer suggestions and show you the maximum tank size for your dispenser.
Does Beverage-Air warrant this item for use in a food truck?
This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.
Do I need to purchase any additional items along with this beer dispenser?
Yes, couplers, regulators, CO2 tanks, and gas hoses are all sold separately.
I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?
R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used as an eco-friendly refrigerant by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
Overall Dimensions:
  • Width:48 Inches
  • Depth:23 1/2 Inches
  • Height:36 Inches
  • Capacity:12.1 cu. ft.
Interior Dimensions:
  • Interior Width:36 Inches
  • Interior Depth:18 1/2 Inches
  • Interior Height:29 1/2 Inches
Tap Tower Dimensions:
  • Tap Tower Diameter:3 Inches

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Resources and Downloads for
Beverage-Air DD48HC-1-S

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.

Equivalent Items 

Beverage-Air DD48Y-1-S (Formerly)

Overall User Rating:

Replace Heading Here

5.0 stars from 1 review

         
  •  
  •  
  •  
  •  
1
  •  
  •  
  •  
  •  
0
  •  
  •  
  •  
  •  
0
  •  
  •  
  •  
  •  
0
  •  
  •  
  •  
  •  
0

People Talk About:

black change clean color finish great hold jet kegerator kegs

Customer Reviews

         

This kegerator has a clean stainless steel finish which is a change from the jet black color. It can also hold 2 kegs which is great for storage.

Min K. on 12/27/2012

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it.

Login or Register