- Spout Length:
- 10"
Beats paying the plumber to get them for you. Saved a good deal of money by not paying the plumber's mark up
Regency 600FD48 Deck-Mounted Faucet with 4" Centers and 8" Swing Spout
Item number 600fd48MFR number 600FD48
Quick Shipping
Usually ships in 1 business day
Product Overview
- 8" swing spout with 2 GPM aerator
- 4" adjustable centers, 1/2" NPS inlets
- Temperature rating 40 - 140 degrees Fahrenheit
- Chrome-plated brass construction
- Leak-resistant quarter-turn ceramic cartridges with check valves
Shipping Restrictions
This item cannot ship to RI, OR, CO, MA, DC, MD, WA, VT, CA, ME, NJ, NY or HI
UPC Code:400010647637
Perfect for busy commercial kitchens, this Regency deck-mounted faucet is the perfect solution when you need a dependable water fixture in your facility!
Regency faucets provide the industry-leading quality you expect. This faucet features an 8" long swing spout that moves easily around the sink bowl, while a 2 GPM aerator provides a consistent flow rate and minimal splashing. It boasts a set of 4" adjustable centers, while the deck-mounted design is easy to install with 1/2" male NPS inlets.
CSA, US and Canada
This product has been certified by the Canadian Standards Association (CSA) to meet select standards for electrical, plumbing, and/or mechanical products in the United States and Canada.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
NSF Certified
This item is certified by NSF to applicable standards.
Sturdy and Durable
With a chrome-plated brass faucet body and ceramic cartridges engineered for durability, you can install this model with confidence. This faucet uses ceramic cartridges, which provide a much lower fail rate than the compression cartridges widely used in the industry.
Trustworthy Design
In this design, 2 ceramic discs fit together to create a watertight seal when closed. This removes the need for a rubber seat washer, which is one of the most frequently replaced parts on a faucet. The sturdy lever handle design makes it easy to turn the water flow off and on.
Questions & Answers
Looking For Specific Info? Get quick answers to product questions with our AI-powered search.
By using this AI-powered search, you agree to our Terms of UseOpens in new tab and Privacy PolicyOpens in new tab.
Frequently Asked Questions From Customers
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
Does this item ship to Canada?
This product cannot be shipped to Canada.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
What parts do I need to install my new faucet?
For both wall and deck mounted faucets, installation kits are sold separately. Check the Works With items to find the proper installation kits and parts!
Compare to Other Products
Price
Cartridge Type
Finish
Material
Mounting Type
Temperature Rating
Water Inlet Size
Overall Dimensions:
- Spout Length:
- 8 Inches
- Faucet Height:
- 4 3/4 Inches
- Faucet Centers:
- 4 Inches
Attention CA Residents:Need Parts & Accessories?
Show replacement parts and accessories for Regency Plumbing & Hardware 600FD48 today!
Find Parts for this ItemResources and Downloads for Regency Plumbing & Hardware 600FD48
A PDF viewer is required to view this product's information. Download Adobe Acrobat softwareOpens in new tab
19 Compatible Models
- Regency Spec Line 600B3246012KS
- Regency Spec Line 600B3247218KS
- Regency Spec Line 600UHKS2412KS
- Regency Spec Line 600UHKS2418KS
- Regency Tables & Sinks 600B22136L9
- Regency Tables & Sinks 600B22136R9
- Regency Tables & Sinks 600B22148213
- Regency Tables & Sinks 600DI1101410
- Regency Tables & Sinks 600DI12012
- Regency Tables & Sinks 600DI1208
- Regency Tables & Sinks 600DI12812
- Regency Tables & Sinks 600DI21014
- Regency Tables & Sinks 600DI21416
- Regency Tables & Sinks 60B42184219K
- Regency Tables & Sinks 60DI12012K
- Regency Tables & Sinks 60DI1208K
- Regency Tables & Sinks 60DI21416K
- Regency Tables & Sinks 60DI31612K
- Regency Tables & Sinks DI-1-10145
Customer Reviews
Frequently Mentioned
- paying
- plumbers
- accomplished
- beats
- communication
- company
- correctly
- deal
- informative
- installed
- Spout Length:
- 12"
Communication with the company was smooth and informative. Shipping swift and correctly accomplished. Installed on a stationary tub in the shop.