or enter your email to be instantly sent the price!

Ships free with Plus

Start a Live Chat with a Customer Service rep to receive the price!
Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST.

Accessories & Options

Customize & Add to Cart
  • 1/2 hp compressor can perform in ambient temperatures up to 100 degrees
  • Six drawers and 1 half door with magnetic snap-in gaskets
  • Heavy gauge stainless steel and aluminum construction
  • Insulated cabinet and lid for better cold air retention
  • Slide out condensing unit for easy servicing; 115V
Shipping: Usually Ships in 12 Weeks
Continental Refrigerator: Converting Doors to Drawers on Pizza Prep Tables

Continental Refrigerator: Converting Doors to Drawers on Pizza Prep Tables

Hello, in this segment we’re going to show you how to convert your Continental pizza prep or base unit from doors to drawers. To do this you’re going to need the following: a Philips screwdriver, cordless drill with an eighth inch drill bit or a Philips adapter, a putty knife, 4 #10 sheet metal screws, a caulking gun with food grade silicone, a rubber mallet, some five and quarter inch breaker covers, possibly a hack saw. Also a pliers which is not shown to remove the vertical pilaster strips. Open the door and remove the top and bottom hinge screws and set the door to the side. Take the four hinge screws that you removed and place back into the hinge holes. After that is done, remove the shelf, the clips, and the side vertical pilaster strips. Your drawer assembly will consist of the top and bottom drawer, and the cage that holds the drawers. Open the top and bottom drawer, find the locking clip for the slide, slide forward, push down at the back, and remove the top and bottom drawers. Unfortunately, the cage assembly will not fit into the opening without removing the right and left outer breaker cover. To do this, take a putty knife, slide it under the front edge and gently remove the covers and set to the side. You’ll have to fill in the space above the drawers. You’ll need to cut 2 five and one quarter inch breaker covers from the covers you removed the hacksaw or you can order from the factory. Snap in at the back, slide up into the top corners, and tap in place with a rubber mallet. You are now ready to install the drawer cage. Take the drawer cage, lift it up slightly, and slide it into the opening. After the drawer cage is installed, slide it all the way to the back, making sure that it is flush to the front of the cabinet. Once the cage is installed, locate the four mounting holes; take your cordless drill with the eighth inch drill bit, and drill the four holes and secure with the 4 #10 Philips truss head sheet metal screws. Take your caulking gun with the food grade silicone, if you have any gaps or spaces where air can be infiltrated into the cabinet, seal those areas with the silicone. We’re now ready to install the top and bottom drawers. Pull the slides out, insert the drawer into the slides, and push all the way back until the drawer is set properly. Do the same for the top drawer. Once the drawers are installed, take your locking slide clip, slide back, and lock in place. Check the top and bottom drawer for closing and gasket seal. I hope this information was helpful and if you need additional information, please contact the factory or you can download the operation manuals from our website, www.continentalrefrigerator.com.

Copy and paste the embed code above.

Looking to change the doors on your Continental Refrigerator pizza prep or base unit to drawers? Thanks to this helpful video, you can quickly and easily convert your unit to better suit your foodservice needs.

Continental Refrigerator: Replacing a Door Gasket

Continental Refrigerator: Replacing a Door Gasket

In this segment, we're going to discuss the care and the steps needed to replace the door gasket on your Continental refrigerator or freezer. It's very important to maintain your gaskets. On a regular basis, they should be inspected for any wear or tear on the sides or on the top. If needed to clean your gasket, use mild soap with warm water and a soft-bristle brush. If a door gasket is required, contact the factory or your supplier with the model and serial number of the case and that'll determine exactly the part number and the gasket needed. No tools are required to replace the gasket. Grasp the top corner or the door gasket and pull straight out of the retainer. Once the gasket is fully removed from the door, take the new gasket and line up the dart on the gasket with the retainer. Pushing with your thumb, making sure that the dart is in line. Once the gasket is in place, close the door, inspect for any gaps or sealing issues, and that's all that is needed to replace a door gasket on your Continental refrigerator or freezer. If additional information is needed, consult the factory or the operation manual, which can be downloaded on www.continentalrefrigerator.com.

Copy and paste the embed code above.

Maintain the gaskets on your Continental refrigerator and freezers with these simple instructions! By inspecting the gaskets for wear and tear, you can ensure there are no gaps or sealing issues on your units.

Continental Refrigerator: Cleaning the Condenser

Continental Refrigerator: Cleaning the Condenser

Today, we're going to discuss the importance and the procedure of cleaning your condenser coil on your Continental refrigerator or freezer. This is important for many reasons. Firstly, it will conserve energy, cut down on your service costs, and also add life to your compressor. It's always important to disconnect the power to your cabinet before doing any preventive maintenance. The first thing you want to determine is where your condensing unit is located. It could be located on the top of the unit, at the rear of the unit, or on the front. Now what you want to do is located the condensing unit and remove the front grill. Once the grill is removed, you'll see the condensing unit and the condenser coil looks like the radiator in your car and inspect for any dirt or paper. Using a stiff nylon brush, remove any debris in a downward motion and always go in the direction of the fins. Depending on the amount of dirt, you may also want to use a shop-vac and you can also pass a flashlight into the fins to see if you can see through or have any additional blockage. If everything looks good, reattach the grill and start your unit. If further information is needed, consult the operation manual on our website at www.continentalrefrigerator.com.

Copy and paste the embed code above.

Conserve energy and cut down on service costs by cleaning the condenser coil on your Continental refrigerator or freezer! This will extend the life of your compressor and keep it running properly.

Continental Refrigeration Pizza Prep Tables

Continental Refrigeration Pizza Prep Tables

Continental Refrigeration gives you innovative designs for your food service needs. With over 2000 models and growing, Continental Refrigeration is American owned and American operated with superior customer service. Their pizza prep tables range in size from 43” to 118” and are certified under NSF-7 to maintain temperatures at 86 degrees Fahrenheit ambient and designed to maintain NSF-7 temperatures at 100 degrees Fahrenheit ambient. Continental Refrigeration offers a standard pizza prep table with a door over the compressor and a unique air design to utilize fans across the entire back of the unit. The more advanced model comes equipped with additional features like two or three tier drawers, a composite board, and a front-breather. There are also options to have a left-side compressor, a single over shelf, double over shelf, and a drawer section above the compressor that holds (3) 1/3 x 6 pans. You can get either the standard pizza prep table or the prep table with all of the features to fit your prepping needs!

Copy and paste the embed code above.

Bring innovation and efficiency to your pizza shop with the Continental Refrigeration pizza prep table! Whether you are looking for the standard table or the upgraded version with options, this pizza prep table is the perfect kitchen addition.

Continental Refrigerator PA93N-D Specs
Width 93 Inches
Depth 38 1/2 Inches
Height 39 Inches
Nominal Width 93 Inches
Amps 8.6 Amps
Hertz 60 Hertz
Phase 1 Phase
Voltage 115 Volts
1/3 Size Pan Capacity 12 Pans
Access Type Doors and Drawers
Capacity 32 cu. ft.
Compressor Location Side Mounted
Compressor Style Side / Rear Breathing
Door Style Swing
Door Type Solid
Horsepower 1/2 HP
Made in America Yes
NSF Listed Yes
Number of Doors 1
Number of Drawers 6
Plug Type NEMA 5-15P
Refrigerant Type R-290

Customer questions about this product

I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?
R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used as an eco-friendly refrigerant by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
Why is the location of a left or right side mounted condensing unit important?
Consider your kitchen’s layout when choosing whether to have the condensing unit on the right or left side and pick the configuration that will keep the compressor as far from heat sources as possible. By ensuring that your unit’s compressor is farther away from equipment like undercounter dishwashers and hot food holding equipment, you can significantly extend the life of the unit.
What kinds of pans can I use in my refrigerated prep table?
While various configurations combining traditional 1/3 size, 1/6 size, and other food pan sizes are possible, it's important to refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.
Ask your own question!

Continental Refrigerator PA93N-D Details

Prepare your most popular pizzas while keeping your ingredients just inches away with the Continental Refrigerator PA93N-D 93" pizza prep table! This pizza prep refrigerator has 32 cu. ft. of space for all your pizza preparation needs. It can accommodate a maximum of (12) 1/3 size pans, which are flush-mount to keep ingredients cool and fresher than ever! It also features 6 drawers and 1 half door to hold a variety of pizza ingredients below.

A full length, 19" deep nylon cutting board makes it easy to assemble whole pies right on the table, and thanks to the insulated lid, you can be sure your ingredients will stay fresh throughout the day. The top, front, and end panels of this unit are made of stainless steel for long-lasting durability, and for excellent temperature retention, the whole unit is insulated with 2" of polyurethane foam. The back is completely enclosed and vented, and it is easily removed for maintenance and modification.

This prep table comes with a 1/2 hp compressor that circulates eco-friendly R-290 refrigerant while blowing forced air over the top of your ingredient pans for even chilling. The condensing unit is found on the left of the table, and conveniently slides out so you can easily service it as needed. Plus, thanks to its 5" casters, this prep table moves easily when you need to clean your kitchen. This unit includes an electronic controller with digital display and hi-low alarm. A 115V electrical connection is required for operation.

Overall Dimensions:
Width: 93"
Depth: 38 1/2"
Height: 39"
Capacity: 32 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • ETL US & Canada

    ETL US & Canada

    This item meets the electrical product safety standards imposed by the ETL, a division of the Intertek Group, for use in the United States and Canada.

  • 5-15P


    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for
Continental Refrigerator PA93N-D

Continental Refrigerator PA93N-D Specsheet Specsheet Continental Refrigeration Pizza Prep Manuals Manual Warranty Warranty Continental Pizza Prep Brochure Brochure

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Continental assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register