Hobart 6430-3 30 lb. Potato Peeler - 200V Scratch and Dent
- Peel 30-33 lb. of root vegetables in 3 minutes
- Removable liner and water inlets for easy cleaning
- Stainless steel construction
You May Also Need
Please note that all items are sold as is, and all sales are final. To ensure that each product in WebstaurantStore Outlet will work correctly upon arrival, it is tested by an experienced technician prior to shipping. We recommend that you carefully read the product description, damage/use description, and other related product literature such as specification sheets and product manuals before placing your order.
Please inspect each item carefully when it arrives at your place of business. If you observe any damage not detailed in the description on this website that may have been caused during shipping, do not sign for the delivery and contact us ASAP.Cart Policy
Because Outlet items sell quickly on a first-come, first-serve basis, simply placing the item in your shopping cart for checkout at a later time does not guarantee a "hold" on the item.Warranty Policy
No Outlet products have a warranty unless otherwise specified. If the warranty is honored, it will be clearly noted in the description of the item. If you have any questions or concerns about a product even after reading the description and product literature, please contact us.
Your Hobart model 6430 and 6460 potato peelers are constructed and designed to give long, satisfactory service, providing they are properly used and maintained. This training video will cover the operation, cleaning, and maintenance of the model 6430 and 6460 potato peelers.
The 6430 potato peeler is designed to peel 30 to 33 pounds of product in one to three minutes using a 3/4 horsepower single- or three-phase motor. The 6460 potato peeler is designed to peel 50 to 60 pounds of product in one to three minutes using a 1 horsepower single- or three-phase motor. For this program, we will be using the 6430 for demonstration purposes.
Close and latch the discharge chute door. Note: The discharge chute door must always be left open when the unit is not in use. Using the lugs on the hopper top as locators, position the hopper top in place on the peeler housing and turn it clockwise into place. Pour the product into the hopper. There should be room in the hopper for the product to move around while peeling, so do not overload the peeler. The capacities to remember are 30 to 33 pounds, maximum, for the 6430, and 50 to 60 pounds, maximum, for the 6460. Turn on the water supply. On units with a disposer, turn on the disposer. This will open the fill valve. Turn on the peeler. Peeling times will vary depending on the type and condition of the product. When the desired degree of peeling has been reached, turn off the water, or disposer where applicable. Place a container under the discharge chute to catch the product, and open the discharge chute door. After the product has been completely discharged, turn off the peeler, and it’s ready for a repeat operation. If the peeler is equipped with a peel trap, it will be necessary to empty the peel trap drawer occasionally.
WARNING: Disconnect the electrical power supply and place a tag at the disconnect switch indicating the circuit is being worked on before beginning any maintenance procedure. The peeler should be cleaned after the peeling operation has been completed. As soon as the peeling operation has been completed, and before the hopper has had time to dry, turn on the water, or disposer if applicable, and flush the interior of the hopper. Then turn off the water, or disposer. Rotate the hopper top counterclockwise, and lift it to remove. Clean the hopper top in a sink. Lift out the abrasive disk, which isn’t fastened to the shaft, and scrub it with a brush and mild soap. Turn on the water again, and thoroughly clean the interior of the hopper, using a mild soap, and a brush, and rinse thoroughly. NOTE: If the abrasive disk should stick and isn’t easily removed, it may be loosened by removing the hex head screw on top of the hub, and threading a longer screw, such as a 5/16 inch, 18 by 1 1/2 inch, in until the disc loosens. If the peeler is equipped with a peel trap, remove the peel trap drawer and thoroughly clean the drawer, as well as the peel trap interior. The discharge chute must be left open when the unit is not in operation, in order to prolong the life of the door seal.
WARNING: Disconnect the electrical power supply and place a tag at the disconnect switch indicating the circuit is being worked on before beginning any maintenance procedure. This machine is equipped with a manual reset overload protection switch. If during operation, the motor should overheat and trip this switch, turn the peeler switch off and allow the motor to cool for several minutes. To reset the switch, remove the bottom screw from the cover plate, rotate the cover plate, and push the red button. If the overload protection switch persists in tripping, contact your local Hobart service office.
This concludes operator training for the Hobart model 6430 and model 6460 potato peelers. To obtain service and parts information concerning the model 6430 and model 6460, contact your local Hobart service office.
Learn all about the operation, cleaning, and maintenance of the Hobart model 6430 and 6460 potato peelers, in this informative video.
|Hobart 6430-3 Specs|
|Depth||27 5/8 Inches|
|Height||33 3/4 Inches|
|Diameter||18 1/8 Inches|
|Made in America||Yes|
Hobart 6430-3 Details
- New; never used
- Left side of chute has small scuff marks.
- Original packaging damaged. Save your kitchen staff hours of prep time and peel 30-33 lb. of root vegetables in just three minutes with this Hobart 6430-3 potato peeler! Constructed of seam-welded stainless steel and heavy-duty plastic components, this model peels large loads of potatoes, carrots, beets and more with no bruising to help you save time and increase your kitchen output! Each unit is easy to use and clean with simple switches, a removable silicon carbide-abrasive disk and Lexan liner, heavy-duty polyester plastic hopper cover, and water inlets for thorough washing.
This peeler features a 3/4 hp electric motor and comes with a four-minute timer that can be adjusted for any increment between 30 seconds to five minutes. A simple manual switch starts the unit. Water connection is a standard 1/2" female pipe thread. The Hobart 6430-3 potato peeler requires a 200V electrical connection. It must be assembled by the customer once it is delivered; it does not ship assembled.
Diameter: 18 1/8"
Depth (including top-mounted discharge chute): 27 5/8"
Height: 33 3/4"
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
Made in America
This item was made in the United States of America.
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
Resources and Downloads for
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.
Get paid to review this product!
If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.Login or Register