Free Shipping


Ships free with Plus

Contact us for pricing

Why do we do this?

Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)

  • Bowl lock safety cover
  • 115/60/1
  • Includes 14" bowl, knives, knife comb, and stainless steel legs with rubber feet
  • 6' flexible cord
  • Chops meat, bread crumbs and other foods uniformly
  • Knives are easy to remove for cleaning
  • Housing doesn't have crevices to trap food particles



Usually Ships in 1 Business Day
When will I receive my item?

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a Call Before Delivery within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your large item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. While the agents will bring the items into the location of your choice, this service does not include set-up of the items being delivered, such as installation of casters, shelves, or other accessories. Small items will not be unpackaged individually; they will be set in place and debris and packaging material will not be removed.

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Hobart 84145 Buffalo Chopper

Hobart 84145 Buffalo Chopper

The following operator training video on the 14" and 18" food cutters is a supplement to the instruction manual that came with your food cutter. If you have questions concerning operation, please consult your manual. Your Hobart food cutter is constructed and designed to give long, satisfactory service, providing it is properly used and maintained. This training video will cover operation, cleaning, and maintenance of the food cutter. The Hobart food cutter is designed to cut and mix a wide variety of products. With products in the rotating stainless steel bowl, rotating knives cut and mix them inside the bowl cover. Model 84186 is furnished with a number 12 attachment up. Various attachments are available for this model. For more information on installation and operation of attachment, consult your instruction manual. Safety devices incorporated in this machine must be in their correct operating position anytime the food cutter is in use. The hand knob must be tightened snugly against the knife unit. The comb must be positioned on the locking adapter. The bowl cover must be closed over the bowl and securely locked by pressing down on the locking handle and turning it 90 degrees. The start/stop switch which controls power to the food cutter and the bowl cover are mechanically interlocked. The switch can't be pulled to the on position unless the bowl cover is locked in place, and with the switch in the on position, the bowl cover can't be unlocked. Always unplug the power cord before cleaning or moving the food cutter. Start the machine by pulling the start/stop switch. Feed the product directly into the bowl as it rotates. The bowl cover is shaped to turn and mix products as the bowl rotates. Warning: hands must never be inserted under the bowl cover during operation of the machine, as sharp rotating knives are located under the bowl cover. If additional mixing is desired, use a spatula or similar utensil to turn the product as it rotates past the bowl opening. To unload the bowl, use a spatula to scrape the product into a bowl or pan from the bowl opening. This may be done while the bowl rotates, or you may turn the machine on and off to rotate the product to the bowl opening. Warning: unplug the power cord before cleaning the food cutter. The food cutter should be wiped with a clean, damp cloth and dried daily. The bowl, knives and attachments, if any, should be removed and washed after each use. Unlock and raise the bowl cover. Remove the comb. Carefully turn the knife shaft so the knives are in a horizontal position. Remove the hand knob and carefully slide the knife unit off of the shaft. Warning: knives are sharp. Exercise extreme caution when handling knives. Remove the bowl by rotating it clockwise to its stop and lifting it from the bowl support. Thoroughly wash and rinse these items in a sink. The knife unit shouldn't be disassembled for cleaning. Reassembly is the reversal of the disassembly. When reinstalling the knife unit, make sure the slot in the knife hob is mated to the notch in the knife shaft and the hand knob is tightened securely. Warning: unplug the machine power cord before beginning any maintenance procedure. The motor has grease-packed bearings and requires no lubrication maintenance. The attachment hub gear case on the model 84186 only and the bowl drive gear case on all models should be checked occasionally. Contact your local Hobart service office. Warning: knives are sharp. Exercise extreme caution when handling knives. The cords between either knife and bowl should be ten thousand to fifty thousandths of an inch. To check the clearance or make an adjustment, unplug the power cord. Unlock and raise the bowl cover and remove the comb. With the knives in a vertical position, check each knife individually at several points around the bowl. If an adjustment is required, loosen the hand knob but do not remove it from the shaft. Hold a one and seven sixteenths inch open hand wrench on the knife retaining bushing and loosen the locking collar with a second wrench. Gently tap the heal of the knife until proper clearance is reached. If clearance is too small, pull the knife upward and repeat the procedure. Adjust the clearance of the second knife as necessary. Retighten the locking collar and the hand knob. It's very important to check the clearance of each knife at several points around the bowl before running the machine after an adjustment. To sharpen knives, remove the unit from its shaft by removing the hand knob. It's not necessary to disassemble the knife unit. Use an ordinary carbon ended stone to sharpen the knives. This concludes operator training for Hobart food cutters. To obtain service and parts information concerning these cutters, contact your local Hobart service office.

Copy and paste the embed code above.

Easily cut and mix bulk ingredients with Hobart's Buffalo chopper! It's easy to use, clean, and maintain. Plus, it incorporates innovative devices to ensure superior safety of the operator while in use.

Hobart 84145-2 Specs
Width 31 7/8 Inches
Depth 18 1/4 Inches
Height 15 1/8 Inches
Amps 3.1 Amps
Hertz 60 Hertz
Phase 1
Voltage 115 Volts
Wattage 373 Watts
Capacity 5 lb.
Horsepower 1/2 HP
Made in America Yes
NSF Listed Yes
Power Type Electric
RPM 1,725
Speeds 1 Speed
Type Buffalo Choppers

Hobart 84145-2 Details

Rapidly process salads, dips, chopped steaks, and other fine foods with the Hobart 84145-2 food cutter. This powerful kitchen workhorse comes complete with a 14" stainless steel bowl, cutlery-grade, stainless steel knives, a stainless steel knife comb, and 3" stainless steel legs with rubber feet.

A durable 1/2 horsepower motor ensures a constant 22 RPM bowl rotation, as well as a 1725 RPM knife rotation to meet the most demanding operations. Watch as food products are reduced to a uniformly small particle size for salads, spreads, bread crumbs, and other budget-friendly recipes.

For excellent cleaning and sanitation, the Hobart 84145-2 food cutter can be easily disassembled without the use of tools. In fact, the bowl, bowl cover, and knives are all easily removable after use. Additionally, the 84145-2's housing is designed of 1-piece, burnished aluminum, and contains no cracks or crevices to trap food particles.

Overall Dimensions:
Width: 31 7/8"
Depth: 18 1/4"
Height: 15 1/8"
Capacity: 5 lb.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

  • UL Listed

    UL Listed

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).

  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

Resources and Downloads for
Hobart 84145-2

Spec Sheet Specsheet Manual Manual Hobart's Warranty Information Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register

Find Related Products