$9,399.00/Each

This product is no longer available. We've left this page up for reference only.

Usually Ships in 5-7 Business Days from manufacturer

Lead times vary based on manufacturer stock

Not eligible for expedited shipping

Product Overview

  • Type 1 hood for grease-producing equipment; exhaust-only system with no makeup air
  • Includes backshelf hood canopy and exhaust fan
  • 18-gauge 430 stainless steel construction on all exposed surfaces
  • Allows for an underhang of 12", measured horizontally from the front edge of the cooking equipment
  • 115/230V belt-driven exhaust fan (5000 CFM)
UPC Code:400013620767

Specs

Quantity
1/Each
Shipping Weight
960 lb.
Length
20 Feet
Depth
23 Inches
Height
14 - 38 Inches
Ceiling Height
Under 10'
Amps
6.5 - 13 Amps
Phase
1 Phase
Voltage
115/230 Volts
Wattage
1,495 Watts
Features
Made in America
Fire Suppression
Without Fire Suppression
Gauge
18 Inches
Horsepower
1 1/2 hp
Plug Type
Hardwire
Stainless Steel Type
Type 430
Style
Backshelf Hood Systems
Type
Type 1

Details

Keep your kitchen free of hazardous grease buildup with this Halifax LBSHP2023 20' x 23" type 1 low proximity commercial kitchen backshelf hood system. This unit is suitable for use over any equipment that has a surface operating temperature under 700 degrees Fahrenheit, and that is required by fire code to have a type 1 hood - this includes fryers, griddles, charbroilers, conveyor pizza ovens, or any equipment that produces grease during the cooking process. The hood removes the grease-laden vapors produced by your equipment and prevents them from accumulating in places where they could become a fire or sanitation hazard, leaving your kitchen clean and safe to use! This is a low-proximity backshelf hood, which is designed for use in applications where the minimum distance from the floor to the bottom edge of the hood cannot be met with a standard canopy. It is an exhaust-only system with no makeup or supply fan and also contains a 115/230V belt-driven exhaust fan designed for 5000 CFM, with your choice of a wall, flat roof, or pitched roof curb mount.

The hood uses (12) 20" x 20" baffle-type filters, and the filters are made from stainless steel to provide durability and make cleaning easy. Grease extracted by the filter is collected in a grease trough, which drains into a stainless steel grease cup for disposal. 18-gauge 430 stainless steel is used on all exposed surfaces to give it excellent durability and cleanability, while the MIG-welded frame provides seamless, liquid-tight joints. The hood features a sloped-front canopy design that drops down close to the equipment in the back while still offering plenty of clearance for cooking.

This hood allows for an underhang of 12", measured horizontally from the front edge of the cooking equipment. 6 hanger brackets are included (shipped loose) to make installation easy. This product must be hard-wired, cords and plugs are not included.

Overall Dimensions:
Length: 20'
Depth: 23"
Height (Front): 14"
Height (Back): 38"

Attention CA Residents:
  • Made in America

    Made in America

    This item was made in the United States of America.

  • Hardwired

    Hardwired

    This product must be hardwired by a professional; it does not plug into a standard wall outlet.

  • UL Listed, US

    UL Listed, US

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.

  • UL Classified EPH

    UL Classified EPH

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.