Earn up to $65.37 back (6,537 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 5-7 Business Days from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Supplies fresh supply air to hoods equipped with a makeup air system
  • Includes washable aluminum mesh filters, accessible through hood end cap for easy service
  • Galvanized steel housing, weather-proof cabinet designed for outdoor roof mounting
  • Recommended for hoods 12' - 13' long
  • 2460 CFM, 1000 RPM, 1/2 hp, 115V, 1 Phase
UPC Code:400013655417

NAKS SF8-ECM Specs

Quantity
1/Each
Shipping Weight
175 lb.
Phase
1 Phase
Voltage
115 Volts
Cubic Feet per Minute
2,460 CFM
Drive Type
Direct Drive
Features
Made in America  Variable Speed
Horsepower
1/2 HP
Plug Type
Hardwire
RPM
1,000 RPM
Type
Supply  Ventilation System Components

Customer questions about this product

How do I size a fan for my hood?

There are many factors that can affect which fan you need for your hood. Any recommended hood sizes given in a fan’s description are representative of a typical installation – factors like long duct runs, duct turns, and using high heat equipment like fryers and charbroilers can require a more powerful fan. Please consult your AHJ (Authority Having Jurisdiction) or installer if you need assistance sizing a hood fan.

Ask your own question!

NAKS SF8-ECM Details

This NAKS SF8-ECM premium efficiency supply fan works in conjunction with your makeup restaurant hood system to deliver fresh air into your kitchen and ensure a comfortable work environment! Makeup air is important in applications where the kitchen doesn't have enough fresh air coming in to replace the air exhausted by the hood, since your hood requires this replacement air to perform to specifications and remove grease, smoke, and VOCs effectively. It is recommended for use on hoods 12' - 13' long.

This 2460 CFM, direct drive fan comes with an electronic control module that permits easy and accurate adjustments to the motor speed and RPM, allowing you to customize setup to meet your specific needs. Just use a small screwdriver to adjust the speed control pot, and your settings will be reflected on an easy-to-read 4-digit LED display.

The fan is designed for durability, too, with a housing made from galvanized steel and a weather-proof cabinet that is designed for outdoor roof mounting. The heavy duty ball bearings in the motor withstand temperatures from -65 to +250 degrees Fahrenheit, giving you maximum durability. It comes with 2 washable aluminum mesh filters that install within the intake hood, and are accessible through the hood end cap for easy service. The motor is 115V, single phase, and is rated at 1/2 hp. It must be hard-wired; a cord and plug are not included. Please be sure to review any relevant fire codes to your area before ordering a ventilation system, and understand the requirements for any equipment going under your hood as this may change from area to area.

Overall Dimensions:
Length: 57"
Width: 32"
Height: 32"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • Hardwired

    Hardwired

    This product must be hardwired by a professional; it does not plug into a standard wall outlet.

  • ETL, US

    ETL, US

    This product has been certified by ETL, a division of the Intertek Group, to meet applicable electrical product safety standards required for use in the United States.

  • ETL, Canada

    ETL, Canada

    This product has been certified by ETL, a division of the Intertek Group, to meet applicable electrical product safety standards required for use in Canada.

Resources and Downloads for
NAKS SF8-ECM

A PDF viewer is required to view this product's information. Download Adobe Acrobat software