• 1.15 GPM @ 60 PSI

UPC Code:




Usually Ships in 1 Business Day
When will I receive my item?

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Fisher Ultraspray Pre-Rinse Valve

Fisher Ultraspray Pre-Rinse Valve

Hi, I’m Jeff and today I’d like to talk to you about the Fisher ultra-spray valve. Long before the EPA Act of 2005, Fisher has always been the leader in water conservation in spray valves and pre-rinse units. Today the 2949, the Fisher ultra-spray valve, is standard on all Fisher pre-rinses. The ultra-spray is also interchangeable with all brands. The reason why is, is that the thread that screws into the end of the handle is a universal thread. It’s a 3/4 14 thread. It fits virtually every pre-rinse out there. You can always tell it’s a Fisher ultra-spray valve by its distinctive blue bumper. So let’s examine some of the other features of the spray valve. The first thing is, is that only Fisher uses the solid bronze handle and what this does is it allows the plunger to be pushed down all the way to allow full flow. Other spray valves use some kind of a plastic handle and overtime the plastic bends and distorts and the operator ends up having to stick a penny or some duct tape in there to get that plunger to push down all the way. Fisher also incorporates a system where we don’t use any O rings up in the nozzle part of it. You can actually take a knife and cut the dish guard bumper all the way off and it would be a no leak spray valve because the actual jet nozzle is pipe threaded and glued right up under the faucet body housing. The nozzle itself is unique to Fisher in that it’s a 1.1 gallon per minute nozzle. The water comes out very much like a power washer type spray of a knife edge spray, so at about 10 inches, 12 inches off the dish you have an oval spray pattern and it is test proven that it is the fastest at blowing garbage off the dish. Fisher ultra-spray is interchangeable with all brands and here is a good example. Another major brand right here removes this old broken spray valve and you’ll notice that the Fisher spray valve will screw right into a competitors handle. Fully interchangeable with all brands. When selecting a pre-rinse, choose the spray valve that set the standard.

Copy and paste the embed code above.

Check out this video on the Ultraspray pre-rinse valve from Fisher! It demonstrates the uses and functions of the ultra-spray valve and what sets it apart from other major brands and competitors.

Fisher Interchangeability: Upgrading Your Pre-Rinse Unit

Fisher Interchangeability: Upgrading Your Pre-Rinse Unit

Hi, I’m Jeff. Today I’d like to talk to you about pre-rinse components that are interchangeable and what we like to call upgradeable. You might have a broken pre-rinse, that’s got a bad spray valve on it or the pre-rinse has got a hose on it that doesn’t work. Rather than change out the complete pre-rinse that is costly and there’s usually a plumbing bill involved in it, we’ve got some ideas here for you that will save you money and make your pre-rinse operate more efficiently. This is one of the ways to upgrade your pre-rinse would be with the Fisher 2949- Ultra Spray valve. This is the one that set the standard, this is the one that the EPA Act of 2005 was written around, and this is the one that President Bush signed into law. This is an easy, easy fix, you simply take off your old spray valve and screw on this one and you’re back up and running again. If your wall bracket brakes and comes loose continually you may need an additional wall bracket or simply upgrade to the Fisher wall bracket that is fully adjustable all the way out to 12 inches away from the wall. Quick easy fix if you have wobbly pre-rinses. Pre-rinse replacement hoses, this is the only hose on the market with a 3 ply aircraft hydraulic hose on the inside. It lasts 3 times longer and with this adapter right here in the packaging it fits all brands. This is an absolute no brainer. Pre-rinse hoses have a tendency to be the one component on a pre-rinse that seem to wear out the quickest. Fisher fits all brands. You don’t even have to know what brand of pre-rinse you have, when you bring home a Fisher, it will fit. When you’re talking about pre-rinse springs, this is one of the strongest springs in the industry. This one will keep the hose up, out of the flood zone of your sink, you won’t need a vacuum breaker if you have a really good spring. When it comes to add-on faucets. Add-on faucets typically have a 3/8 pipe thread, and when you’re cutting a 3/8 pipe thread it doesn’t matter who you are or how you cut it, it’s a 3/8 pipe thread. It’ll be interchangeable. There are 4 all Fisher add-on faucets for pre-rinses will fit all other brands of pre-rinse units. These are the pre-rinse components that are interchangeable. Now let’s go see how they work. Ok, so what we have here is a competitor’s pre-rinse and what were gonna do is change out the spray valve, the hose, the spring and even add a wall bracket increasing the quality components of the pre-rinse to Fisher. So that’s how the interchangeability of Fisher components can upgrade any pre-rinse.

Copy and paste the embed code above.

Check out this video to learn how Fisher can help you upgrade your pre-rinses! Fisher offers pre-rinse components, such as spray valves, hoses and springs that are interchangeable, allowing them to adapt with any other brand.

Fisher 2949 Specs
Flow Rate 1.15 GPM
Made in America Yes
Type Spray Valves

Fisher 2949 Details

The highly-efficient Fisher 2949 ultra pre-rinse spray valve saves you water and lowers operating costs while maintaining an even, consistent spray for fast and effective rinsing. Fits all brands.

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

  • Made in America

    Made in America

    This item was made in the United States of America.

Resources and Downloads for
Fisher 2949

Spec Sheet Specsheet Instructions Instructions Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Compatible Models

This item is compatible with the listed models, according to the manufacturer. We do our best to keep this listing as accurate and up-to-date as possible. If you have any questions or concerns, feel free to contact a Customer Solutions Specialist before placing your order.

Customer Reviews

  • Overall User Rating: Fisher 2949 Ultra Pre-Rinse Spray Valve for Pre-Rinse Units

    4.8 stars from 13 reviews


    People Talk About:

    GREAT spray replacement valve water sprayer PRESSURE rinse years dishes

    We needed to replace our pre rinse spray valve. So we found it here at a great price. It's been great not a single problem.

    Posted on

    This is the fist time we have replaced the valve in 5 years. They work great, we use this pretty much all day long every day.

    Posted on

    Fisher ulte pre rinse valve is must have product for any restaurant business. Easy to operate, comfy handle and last but not least great pressure wash.

    from PIZZAONEAVON LLC Posted on

    Ton of pressure, good for washing big items.

    Replaced high volume sprayer nozzel with this one. Uses half the water and cleans off dishes twice as good. Nozzle had a flat spray pattern instead of a round shower wich allows it to use less water at a higher pressure while still having similar coverage

    from On lounge and grill Posted on

    This is a great spray head. I t fits the T & S spray arm in case anybody is wondering.... It really saves water whilst being an effective cleaner

    from TFC BBQ & Bakery Posted on

    The very best replacement hose on the market. It is extremely sturdy and will last several years. The very cheapest price anywhere out there on the net.

    from ckd restaurants, llc Posted on

    I bought this replacement spray valve for my commercial three compartment sink and is an excellent replacement part. No issues over the past six months.

    from TKNY Capital, LLC Posted on

    Has all the functionality and durability one would expect for a pre rinse spray valve. Remains in good working order and looks as good as new months after purchase.

    Posted on

    Ordered this to replace an identical one FIVE years ago and it lasted under constant water and daily use. Cannot imagine one lasting any longer so I confidently ordered the same product and have been very pleased with it.

    Posted on


    from Golden Rule BBQ Posted on

    This item is great product very handy light rinse with very good pressure .We are working around one with this item with no problem so It is awesome.

    from h&I holdings LTD Posted on

    The fisher spray valve is working perfectly. The spray head is metal so I am hoping we will need a replacement for a long time to come. Works just as good as our old one and uses less water making it a no brainer.

    from Gallaghers Pizza Posted on

    I bought this with a faucet and can only imagine what the plumber would have charged for this. I found the video very useful, the others shown are the ones we have used in the last 5 years and we not very effective. Lets just say that my dishwashers started using the hose instead because they simply did not work well. Now they are using the sprayer and doing the dishes correctly! I can't wait to see how much water we are saving now!

    from Danny's Ironwood Grill Posted on

User Submitted Photos & Video:

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register

Find Related Products