$13,704.00/Each

Ships free with Plus

Earn up to $411.12 back (41,112 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.

Usually Ships in 4-5 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Standard, easy-to-read LED digital controls
  • Field-reversible insulated dutch doors help to prevent temperature loss
  • Non-venting design is permitted by most local codes and reduces installation costs
  • AquaTemp system maintains optimum food texture by monitoring temperature and humidity
  • 240V, 1 Phase, 8kW
UPC Code:400012412332

Cres Cor RO151FW1332DE Specs

Quantity
1/Each
Shipping Weight
392 lb.
Width
34 7/8 Inches
Depth
35 1/8 Inches
Height
73 11/16 Inches
Interior Width
28 3/4 Inches
Interior Depth
26 7/8 Inches
Interior Height
58 Inches
Amps
50 Amps
Hertz
60 Hz
Phase
1 Phase
Voltage
240 Volts
Wattage
8,000 Watts
Cabinet Size
Full Height
Construction
Stainless Steel
Control Type
Classic
Features
Controlled Humidity  Made in America  Rethermalizer
Interior Configuration
Slides
Maximum Temperature
350 Degrees F
Number of Doors
2 Doors
Plug Type
NEMA 6-50P
Power Type
Electric
Type
Cook & Hold Ovens

Cres Cor RO151FW1332DE Details

For your rethermalizing and slow roasting needs, add this Cres Cor RO151FW1332DE Quiktherm rethermalization oven with standard controls and an AquaTemp system to your kitchen! It features 8kW of heating power and utilizes an AquaTemp system to maintain a balance between heat and humidity for a variety of cooking, heating, and holding options.

With the standard controls, this model features a digital LED control module that is both easy to read and easy to understand. The maximum temperature of this oven is 350 degrees Fahrenheit and, since the unit has a large temperature display, you can easily see what the set point is for the interior of the oven compartment. Plus, the controls are located at the top of the unit for easy access and to keep them out of the way of accidental bumps, drips, or spills.

For a variety of cooking, holding, or rethermalizing options, this model comes equipped with AquaTemp. This technology maintains a balance of humidity and temperature for optimum food texture. It continuously monitors the temperature and humidity, and you can adjust both through use of the controller. It uses an 1850W water heater with a separate control, an automatic water fill system, a low water indicator, and an auto shut-off for safety when the water reaches critically low levels.

To make installation less expensive and complicated, this model has a non-venting design so that it may not need to be placed under a hood. Be sure to check your own local regulations, however this model is accepted by many local codes so that you can use it in places where a regular oven or other cooking equipment wouldn't be allowed.

For long-lasting durability and a professional appearance, this oven is made entirely with stainless steel. On the inside, it features coved corners so you can easily clean out spills, drips, or crumbs at the end of the day. On the outside, the cabinet has an integral drip trough to help make sure that any condensation collects in the drip pan and not on your floor. This helps to prevent slipping hazards to make sure your employees stay safe. Plus, this oven also has 5" heavy-duty swivel casters that allow you to easily move the oven for cleaning or maintenance.

To make it easy for your staff to load and unload food baskets, this model comes with 16 sets of stainless steel angle brackets on 3" spacing. The brackets can accommodate (16) 18" x 26" baskets or (32) 13" x 26" baskets so you can rethermalize dozens of meals at once.

For easy access to the interior of the cabinet, this model comes with half doors that let you open just the door you need, reducing heat loss. The doors are field reversible and come with magnetic latches to keep them closed during reheating or cooking. They feature heavy-duty chrome-plated hinges to make sure that they stand up to frequent, heavy use. Plus, the perimeter silicone gaskets ensure that the heat stays where it is supposed to be - inside your oven!

This model requires a 240V, 1 phase electrical connection for operation and has an 8kW output.

Overall Dimensions:
Left to Right: 34 7/8"
Front to Back: 35 1/8"
Height: 73 11/16"

Interior Dimensions:
Left to Right: 28 3/4"
Front to Back: 26 7/8"
Height: 58"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:
  • Made in America

    Made in America

    This item was made in the United States of America.

  • CSA, US and Canada

    CSA, US and Canada

    This product has been certified by the Canadian Standards Association (CSA) to meet select standards for electrical, plumbing, and/or mechanical products in the United States and Canada.

  • CSA Sanitation NSF4

    CSA Sanitation NSF4

    This item is certified for the U.S. market to the requirements of the NSF/ANSI 4 standard of the Canadian Standards Association (CSA).

  • 6-50P

    6-50P

    This unit comes with a NEMA 6-50P plug.

Need Parts & Accessories?

Show replacement parts and accessories for Cres Cor RO151FW1332DE today!

Resources and Downloads for
Cres Cor RO151FW1332DE

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Equivalent Items

Cres Cor RO-151-FW-1332DE