$13,704.00/Each

Ships free with Plus

Earn up to $411.12 back (41,112 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.  Enter ZIP Code >

Product Overview

  • Standard, easy-to-read LED digital controls
  • Field-reversible insulated dutch doors help to prevent temperature loss
  • Non-venting design is permitted by most local codes and reduces installation costs
  • AquaTemp system maintains optimum food texture by monitoring temperature and humidity
  • 208V, 1 Phase, 8kW
UPC Code:400012412301
Shipping:Usually Ships in 4-5 Weeks
Cres Cor RO151FW1332DE Specs
Quantity1/Each
Shipping Weight392 lb.
Width34 7/8 Inches
Depth35 1/8 Inches
Height73 11/16 Inches
Interior Width28 3/4 Inches
Interior Depth26 7/8 Inches
Interior Height58 Inches
Amps50 Amps
Hertz60 Hertz
Phase1 Phase
Voltage208 Volts
Wattage8,000 Watts
Cabinet Size Full Height
Construction Stainless Steel
Control Type Classic
Features Controlled Humidity

Made in America

Rethermalizer
Interior Configuration Slides
Maximum Temperature350 Degrees F
Number of Doors2 Doors
Plug Type NEMA 6-50P
Power Type Electric
Type Cook & Hold Ovens

Cres Cor RO151FW1332DE Details

For your rethermalizing and slow roasting needs, add this Cres Cor RO151FW1332DE Quiktherm rethermalization oven with standard controls and an AquaTemp system to your kitchen! It features 8kW of heating power and utilizes an AquaTemp system to maintain a balance between heat and humidity for a variety of cooking, heating, and holding options.

With the standard controls, this model features a digital LED control module that is both easy to read and easy to understand. The maximum temperature of this oven is 350 degrees Fahrenheit and, since the unit has a large temperature display, you can easily see what the set point is for the interior of the oven compartment. Plus, the controls are located at the top of the unit for easy access and to keep them out of the way of accidental bumps, drips, or spills.

For a variety of cooking, holding, or rethermalizing options, this model comes equipped with AquaTemp. This technology maintains a balance of humidity and temperature for optimum food texture. It continuously monitors the temperature and humidity, and you can adjust both through use of the controller. It uses an 1850W water heater with a separate control, an automatic water fill system, a low water indicator, and an auto shut-off for safety when the water reaches critically low levels.

To make installation less expensive and complicated, this model has a non-venting design so that it may not need to be placed under a hood. Be sure to check your own local regulations, however this model is accepted by many local codes so that you can use it in places where a regular oven or other cooking equipment wouldn't be allowed.

For long-lasting durability and a professional appearance, this oven is made entirely with stainless steel. On the inside, it features coved corners so you can easily clean out spills, drips, or crumbs at the end of the day. On the outside, the cabinet has an integral drip trough to help make sure that any condensation collects in the drip pan and not on your floor. This helps to prevent slipping hazards to make sure your employees stay safe. Plus, this oven also has 5" heavy-duty swivel casters that allow you to easily move the oven for cleaning or maintenance.

To make it easy for your staff to load and unload food baskets, this model comes with 16 sets of stainless steel angle brackets on 3" spacing. The brackets can accommodate (16) 18" x 26" baskets or (32) 13" x 26" baskets so you can rethermalize dozens of meals at once.

For easy access to the interior of the cabinet, this model comes with half doors that let you open just the door you need, reducing heat loss. The doors are field reversible and come with magnetic latches to keep them closed during reheating or cooking. They feature heavy-duty chrome-plated hinges to make sure that they stand up to frequent, heavy use. Plus, the perimeter silicone gaskets ensure that the heat stays where it is supposed to be - inside your oven!

This model requires a 208V, 1 phase electrical connection for operation and has an 8kW output.

Overall Dimensions:
Left to Right: 34 7/8"
Front to Back: 35 1/8"
Height: 73 11/16"

Interior Dimensions:
Left to Right: 28 3/4"
Front to Back: 26 7/8"
Height: 58"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • 6-50P

    6-50P

    This unit comes with a NEMA 6-50P plug.

  • CSA Sanitation NSF4

    CSA Sanitation NSF4

    This item is certified for the U.S. market to the requirements of the NSF/ANSI 4 standard of the Canadian Standards Association (CSA).

  • CSA_C_US

    CSA_C_US

    This item meets the standards imposed by the Canadian Standards Association (CSA) for use in the United States of America and Canada.

  • Made in America

    Made in America

    This item was made in the United States of America.

Resources and Downloads for
Cres Cor RO151FW1332DE

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Equivalent Items 

Cres Cor RO-151-FW-1332DE

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register