Other Available Voltages:
Installation ServicesCheck if installation is currently available for your area. Enter ZIP Code >
- Standard, easy-to-read LED digital controls
- Field-reversible insulated dutch doors help to prevent temperature loss
- Non-venting design is permitted by most local codes and reduces installation costs
- AquaTemp system maintains optimum food texture by monitoring temperature and humidity
- 208V, 3 Phase, 8kW
|Cres Cor RO151FPWUA18DE Specs|
|Shipping Weight||392 lb.|
|Width||28 1/4 Inches|
|Depth||34 1/2 Inches|
|Height||73 11/16 Inches|
|Interior Width||21 3/4 Inches|
|Interior Depth||26 7/8 Inches|
|Interior Height||58 Inches|
|Cabinet Size||Full Height|
|Features|| Controlled Humidity|
Made in America
|Maximum Temperature||350 Degrees F|
|Number of Doors||4 Doors|
|Type||Cook & Hold Ovens|
Cres Cor RO151FPWUA18DE Details
For your rethermalizing and slow roasting needs, add this Cres Cor RO151FPWUA18DE pass-through Quiktherm rethermalization oven with standard controls and an AquaTemp system to your kitchen! It features 8kW of heating power and utilizes an AquaTemp system to maintain a balance between heat and humidity for a variety of cooking, heating, and holding options. It is also made with doors on two sides to allow your staff to load the cabinet from one side and unload it from the other.
With the standard controls, this model features a digital LED control module that is both easy to read and easy to understand. The maximum temperature of this oven is 350 degrees Fahrenheit and, since the unit has a large temperature display, you can easily see what the set point is for the interior of the oven compartment. Plus, the controls are located at the top of the unit for easy access and to keep them out of the way of accidental bumps, drips, or spills.
For a variety of cooking, holding, or rethermalizing options, this model comes equipped with AquaTemp. This technology maintains a balance of humidity and temperature for optimum food texture. It continuously monitors the temperature and humidity, and you can adjust both through use of the controller. It uses an 1850W water heater with a separate control, an automatic water fill system, a low water indicator, and an auto shut-off for safety when the water reaches critically low levels.
To make installation less expensive and complicated, this model has a non-venting design so that it may not need to be placed under a hood. Be sure to check your own local regulations, however this model is accepted by many local codes so that you can use it in places where a regular oven or other cooking equipment wouldn't be allowed.
For long-lasting durability and a professional appearance, this oven is made entirely with stainless steel. On the inside, it features coved corners so you can easily clean out spills, drips, or crumbs at the end of the day. On the outside, the cabinet has an integral drip trough to help make sure that any condensation collects in the drip pan and not on your floor. This helps to prevent slipping hazards to make sure your employees stay safe. Plus, this oven also has 5" heavy-duty swivel casters that allow you to easily move the oven for cleaning or maintenance.
To make it easy for your staff to load and unload food pans, this model comes with 18 sets of stainless steel wire universal angle brackets. The brackets can accommodate 22" x 20" pans, 10" x 20" pans, full size steam table pans, full size sheet pans, and even 14" x 18" service trays.
For easy access to the interior of the cabinet, this model comes with half doors that let you open just the door you need, reducing heat loss. The doors are field reversible and come with magnetic latches to keep them closed during reheating or cooking. They feature heavy-duty chrome-plated hinges to make sure that they stand up to frequent, heavy use. Plus, the perimeter silicone gaskets ensure that the heat stays where it is supposed to be - inside your oven!
This model requires a 208V, 3 phase electrical connection for operation and has an 8kW output.
Left to Right: 28 1/4"
Front to Back: 34 1/2"
Height: 73 11/16"
Left to Right: 21 3/4"
Front to Back: 26 7/8"
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
CSA Sanitation NSF4
This item is certified for the U.S. market to the requirements of the NSF/ANSI 4 standard of the Canadian Standards Association (CSA).
This item meets the standards imposed by the Canadian Standards Association (CSA) for use in the United States of America and Canada.
This unit comes with a locking NEMA L15-30P plug.
Made in America
This item was made in the United States of America.
Resources and Downloads for
Cres Cor RO151FPWUA18DE
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.Login or Register