Quick Shipping

Usually ships in 1 business day

Product Overview

  • Pressure-compensating Softflo aerator releases water at 2.2 GPM
  • 1 3/4" MVP push handle
  • Single hole, deck mounting allows for quick and easy installation
  • High-quality, polished chrome finish
  • Adjustable 2-25 second water metering system saves money and prevents waste

Shipping Restrictions

This item cannot ship to CA
UPC Code:611943449407

Chicago Faucet Company 333-665PSHABCP Specs

Quantity
1/Each
Shipping Weight
2.18 lb.
Spout Length
3 1/2 Inches
Faucet Width
2 Inches
Faucet Height
4 1/4 Inches
Cartridge Type
Metering
Faucet Centers
Single
Finish
Chrome
Flow Rate
2.2 GPM
Handle Type
Push
Material
Brass
Mounting Style
Deck Mounted
Pressure Rating
20 - 125 PSI
Spout Clearance
1 1/2 Inches
Spout Type
Cast
Temperature Rating
40 - 140 Degrees F
Type
Faucets
Water Inlet Size
1/2 Inches

Chicago Faucet Company 333-665PSHABCP Details

Optimize water efficiency and regulate usage by outfitting your sink with this Chicago Faucets single-supply deck-mounted single-hole metering faucet. Featuring a vandal-proof, 1 3/4" MVP metering push handle, this item releases a measured amount of water before shutting off - adjustable for anytime between 2 to 25 seconds after turning on. This helps to prevent water waste in your facility by controlling how much water is released per use. Additionally, this feature eliminates the risk of employees or visitors leaving the water running after they walk away, saving you money and reducing the chance of water damage. Coming with a reliable, one-touch operation, this product even works to improve hygiene and reduces the spread of germs in your facility, promoting a clean, safe environment.

Boasting a durable, high-quality brass construction and bright, polished chrome finish, this sink faucet is equipped with a 4 1/4" height spout and a pressure-compensating Softflo aerator that releases a soft, non-splashing flow of water at 2.2 GPM. Developed with the utmost convenience in mind, the deck-mounted design and MVP metering cartridge and actuator assembly make this model easy to install and simple to maintain. This model connects to the water lines with a 1/2" NPSM inlet with a coupling nut for a 3/8" or 1/2" flexible riser. Able to withstand daily wear and tear, trust this Chicago Faucet product to get the job done right!

Overall Dimensions:
Spout Length: 3 1/2"
Faucet Height: 4 1/4"
Faucet Width: 2"

Attention CA Residents:

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

I live in California. Can I purchase this product?

This product cannot be shipped to California.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • ICC-ES ASME A112.18.1/CSA B125.1

    ICC-ES ASME A112.18.1/CSA B125.1

    This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.

  • ICC-ES Low Lead NSF/ANSI 372

    ICC-ES Low Lead NSF/ANSI 372

    This item has been tested by the ICC-ES to meet NSF/ANSI 372 standards for drinking water lead content.

  • U.S. Green Building Council (USGBC)

    U.S. Green Building Council (USGBC)

    This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.

  • ICC-ES Drinking Water NSF/ANSI 61, Section 9

    ICC-ES Drinking Water NSF/ANSI 61, Section 9

    This item has been tested by the ICC-ES to meet NSF/ANSI 61, Section 9 standards for drinking water.

  • Buy American Act Compliant

    Buy American Act Compliant

    This product complies with the provisions of the Buy American Act.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Resources and Downloads for
Chicago Faucet Company 333-665PSHABCP

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Find Related Products