$139.99/Each

Ships free with Plus
Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Hidden non-aerated spray device releases water at 0.5 GPM
  • Single hole, deck mounting allows for quick and easy installation
  • 10 - 30 second adjustable metering cycle
  • Polished chrome-plated brass body
  • 1/2" NPSM male inlet
UPC Code:671262850698

T&S Brass and Bronze Works BP-0723 Specs

Quantity
1/Each
Shipping Weight
3.5 lb.
Spout Length
4 1/16 Inches
Faucet Width
2 1/4 Inches
Faucet Height
5 7/8 Inches
Cartridge Type
Metering
Faucet Centers
Single
Features
ADA Compliant  Flex Inlets Included  Made in America
Finish
Chrome
Flow Rate
0.5 GPM
Handle Type
Push
Material
Brass
Mounting Style
Deck Mounted
Pressure Rating
60 PSI
Spout Clearance
1 15/16 Inches
Spout Type
Cast
Temperature Rating
40 - 140 Degrees F
Type
Faucets
Water Inlet Size
3/8 Inches

T&S Brass and Bronze Works BP-0723 Details

Optimize water efficiency and regulate usage by outfitting your sink with this Lake Crest by T&S BP-0723 deck mounted single temperature self-closing metering faucet. Featuring a chrome-plated push button cap with a metering cartridge, this item releases a measured amount of water before shutting off - adjustable for anytime between 10 to 30 seconds after turning on. This helps to prevent water waste in your facility by controlling how much water is released per use. Additionally, this feature eliminates the risk of employees or visitors leaving the water running after they walk away, saving you money and reducing the chance of water damage. Coming with a reliable, one-touch operation, this product even works to improve hygiene and reduces the spread of germs in your facility, promoting a clean, safe environment.

Boasting a durable, high-quality brass construction and bright, polished chrome-plated finish, this sink faucet is built to last. It's equipped with a hidden, non-aerated spray device to provide a consistent 0.5 GPM water flow rate at 60 PSI. Developed with the utmost convenience in mind, this single-hole, single temperature faucet can be deck mounted for easy installation and maintenance. It has a 1/2" NPSM male inlet and a 24" flexible stainless steel supply hose with a 3/8" compression fitting. Able to withstand daily wear and tear, trust this metering faucet to get the job done right!

Overall Dimensions:
Spout Length: 4 1/16"
Faucet Height: 5 7/8"
Faucet Width: 2 1/4"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

  • 3/8" Water Connection

    3/8" Water Connection

    This unit comes with a 3/8" water connection for water supply.

  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • NSF/ANSI 61 & 372

    NSF/ANSI 61 & 372

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • CSA, US

    CSA, US

    This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in the United States.

Resources and Downloads for
T&S Brass and Bronze Works BP-0723

A PDF viewer is required to view this product's information. Download Adobe Acrobat software