Name: T&S B-0805-F10 Deck Mounted Single Temperature Faucet with Push Button Cap, Metering Cartridge, and 1 GPM Aerator
Brand: T&S Brass and Bronze Works
SKU: 510B0805F10
Price: 126.5 USD
Availability: LimitedAvailability

A close up of a chrome T&S metering faucet with a gold nut.

0:00 / 0:00

Only

$126.50/Each

Ships free with Plus

Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Special Order Shipping

An estimated delivery date will be provided after placing the order

Product Overview

Single inlet
1 GPM aerator
Metering cartridge
Vandal-resistant push button cap
1/2" NPSM male inlet
Polished chrome-plated brass body

Shipping Restrictions

This item cannot ship to CA

UPC Code:671262796828

View all T&S Brass and Bronze Works Metering Faucets

plus
Easyflex White PTFE Thread Seal Tape 1/2" x 520"
$0.79/Each

Quantity: 1/Each
Shipping Weight: 3 lb.
Spout Length: 4 5/16 Inches
Faucet Width: 1 15/16 Inches
Faucet Height: 4 15/16 Inches
Cartridge Type: Metering
Faucet Centers: Single
Finish: Chrome
Flow Rate: 1 GPM
Handle Type: Push
Material: Brass
Mounting Style: Deck Mounted
Pressure Rating: 20 - 125 PSI
Spout Clearance: 1 5/8 Inches
Temperature Rating: 40 - 140 Degrees F
Type: Faucets
Water Inlet Size: 1/2 Inches

T&S Brass and Bronze Works B-0805-F10 Details

This T&S B-0805-F10 deck mounted single temperature faucet is the perfect solution when you need a reliable water fixture for hand-washing in your facility. Metering faucets are ideal for lavatory applications because the push button cap activates the water flow for a set amount of time, saving water and utility costs. The metering cycle on this faucet is adjustable between 10 and 30 seconds, and the push button cap is vandal-resistant.

Thanks to a 1 GPM aerator, the spout delivers gentle water flow that's perfect for hand-washing. Additionally, this faucet is engineered for maximum durability and uses a metering cartridge to control the cycle. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.

Overall Dimensions:
Spout Length: 4 5/16"
Faucet Height: 4 15/16"
Faucet Width: 1 15/16"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

I live in California. Can I purchase this product?

This product cannot be shipped to California.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.