Ships free with Plus

or enter your email to be instantly sent the price!

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST

Earn up to $193.24 back (19,324 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.  Enter ZIP Code >

Product Overview

  • Tested to perform in ambient temperatures of 100 degrees Fahrenheit
  • Clear lift-up lid maximizes product visibility
  • Extra-large 17" wide, removable cutting board provides ample workspace and makes cleaning easy
  • (10) 1/6 size food pans included
  • Environmentally-safe R290 refrigerant; 115V, 1/3 hp
UPC Code:400013143082
Shipping:Usually Ships in 2-3 Months
Beverage-Air SPE72HC-10C-CL Specs
Quantity1/Each
Shipping Weight438 lb.
Width72 Inches
Depth38 3/8 Inches
Height50 1/2 Inches
Interior Width68 Inches
Nominal Width 72 Inches
Cutting Board Depth17 Inches
Interior Height17 3/4 Inches
Work Surface Height36 Inches
Amps5.4 Amps
Hertz60 Hertz
Phase1 Phase
Voltage115 Volts
1/6 Size Pan Capacity10 Pans
Access Type Doors
Capacity21.5 cu. ft.
Casters With Casters
Compressor Location Rear Mounted
Compressor Style Side / Rear Breathing
Door Style Swing
Door Type Solid
Features Made in America
Hinge Location Left/Right
Horsepower1/3 HP
Installation Type Freestanding
Number of 1/6 Size Pans Included10 Pans
Number of Doors3 Doors
Number of Shelves6 Shelves
Plug Type NEMA 5-15P
Refrigerant Type R-290
Refrigeration Type Air Cooled
Style Counter Height
Temperature Range36 - 38 Degrees F
Top Type Standard Top

Workstation Refrigerators

Customer questions about this product

Does Beverage-Air warrant this item for use in a food truck?
This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.
How do I know if this unit will fit under or match the height of my ADA-Height counter?
Many manufacturers offer their refrigeration equipment in several different height options to best meet your needs. Here's a breakdown of how we classify these different heights:

Counter Height: Work surface is more than 34" high; standard height unit.

ADA Height: Work surface height is 34" or less; complies with ADA regulations.

Low Profile: Work surface height is less than 32"; designed to fit under most ADA-height counters.

If the unit you are purchasing does not have a flat top, such as a worktop or sandwich/salad prep table, it may affect whether or not it will align with certain countertops. To ensure that the product will meet your needs, please reference the product's literature and specifications.
What does the “H” or “HC” mean in the newer Beverage-Air model numbers?
This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
What kinds of pans can I use in my refrigerated prep table?
While various configurations combining traditional 1/3 size, 1/6 size, and other food pan sizes are possible, it's important to refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.
I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?
R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used as an eco-friendly refrigerant by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
Ask your own question!

Beverage-Air SPE72HC-10C-CL Details

From the Elite series, the Beverage Air SPE72HC-10C-CL 72" refrigerated sandwich prep table ensures that your toppings stay fresh and ingredients stay nearby at food-safe temperatures. This particular unit boasts a clear lid to provide excellent product visibility, allowing for both employees and customers to see the toppings available. Plus, its extra-large 17" wide polyethylene cutting board gives your employees ample workspace for assembling salads, sandwiches, and other popular dishes. It's even removable for hassle-free cleaning. As an added bonus, extra counterspace is built onto the right-hand side, which is great for extending the work area or for storing a piece of small countertop equipment.

In terms of capacity, the top section by the cutting board can hold up to (10) 1/6 size food pans, while (6) epoxy-coated steel wire shelves inside the base let you easily organize the interior and utilize the 21.5 cu. ft. space. For your convenience, a set of (10) 1/6 size, 4" deep food pans are included; these pans are made of durable polycarbonate to withstand regular use.

A stainless steel front, sides, top, doors and grille provide years of dependable performance. Inside, the cabinet even boasts a corrosion-resistant aluminum liner, which helps protect it from spill or leak damage. Three self-closing doors ensure easy access too, as each is outfitted with a 120 degree stay-open feature on cartridge-style hinges, while a snap-in gasket provides a secure closure. Since the doors are removable and field-reversible, they deliver the ultimate convenience!

For outstanding performance, the prep table's high-capacity 1/3 hp refrigeration system features an advanced airflow management system that cools pans from the bottom. This airflow ensures that the internal temperature is maintained between 36 and 38 degrees Fahrenheit, creating a food-safe environment for healthy holding. It also produces uniform temperature distribution throughout the cabinet to prevent inconsistent pockets of air from forming. To deliver outstanding efficiency, the refrigeration system even circulates R290 refrigerant, an eco-friendly option with an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 0. CFC-free foamed-in-place polyurethane insulation helps maintain energy efficiency while also providing overall support to the cabinet.

At the end of the day, this prep table is easy to clean around and service, as it includes a set of 4 heavy-duty 6" casters, 2 of which feature brakes to hold it steady during operation. It requires a 115V electrical connection and includes an 8' long cord.

Overall Dimensions:
Width: 72"
Depth with bumper: 38 3/8"
Work Surface Height: 36"
Height with lid open: 50 1/2"
Capacity: 21.5 cu. ft.

Interior Dimensions:
Width: 68"
Depth (upper): 23 3/8"
Depth (lower): 15 3/8"
Height (usable): 17 3/4"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Classified EPH

    UL Classified EPH

    This product complies with UL EPH standards and meets ANSI/NSF requirements.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • UL Sanitation

    UL Sanitation

    This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).

Resources and Downloads for
Beverage-Air SPE72HC-10C-CL

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register