$10,121.00/Each
Contact us for details
Ships free with PlusCall 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)
Earn up to $303.63 back (30,363 points)with a Webstaurant Rewards Visa® Credit Card
Finish: Black Exterior, Twelve Tap
Installation Services
Usually Ships in 4 Weeks from manufacturer
Lead times vary based on manufacturer stock
Product Overview
- Holds (4) 1/2 size kegs
- Twelve all-stainless steel taps and antimicrobial tubing allow for use with wine, beer, and coffee
- Durable, steel construction with a wear-resistant black vinyl finish
- Insulated with CFC- and HCFC-free, foamed-in-place polyurethane
- Uses R290 refrigerant to maintain a temperature range of 36 to 38 degrees Fahrenheit
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
View All Items
$142.49/Each
$234.49/Each
$476.49/Each
$499.00/Each
$849.00/Each
$1,499.00/Each
$444.99/Each
Out Of Stock
$579.00/Each
This Beverage-Air DD78HC-1-B-ALT-12T kegerator beer dispenser helps you serve the coldest beer in town.
Featuring 12 taps, this kegerator makes it easy to serve your patrons cold, refreshing, perfectly drafted beer. Thanks to its heavy-duty forced air refrigeration system, this kegerator can hold (4) 1/2 size kegs. An all-stainless steel tower design and antimicrobial tubing allow you to serve beer, wine, or coffee without the need to retrofit later, and the tubing protects against common beverage-spoiling bacteria. It requires a 115V electrical connection. The manifold / distributor and beer lines are included.
5-15P
This unit comes with a NEMA 5-15P plug.
Made in America
This item was made in the United States of America.
UL Classified EPH
This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.
UL Listed, US & Canada
This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States and Canada.
UL Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Durable Construction
Boasting a durable, steel construction with a wear-resistant black vinyl finish, this kegerator withstands the daily demands of your busy bar, pub, or catered event. The top is made of heavy-duty stainless steel for easy cleaning and maintenance. The interior construction includes galvanized steel walls and ceiling, while the floor and door sills are both made from heavy-duty stainless steel to ensure years of long-lasting service and an easy-to-clean design.
Mess-Free Operation
The drip tray on this twelve tap kegerator beer dispenser helps contain liquid for a clean, mess-free operation.
Safe and Secure
It comes equipped with standard door locks to keep your inventory secure after hours and between keg replacements.
Convenient Design
Self-closing doors with magnetic gaskets ensure the doors seal tightly each and every time to keep kegs at the proper temperature. This dispenser's full electronic control makes it easy to operate, so it's sure to upgrade your efficiency. Automatic, non-electric defrost functionality allows you to use this dispenser without worry, while an epoxy-coated evaporator coil equips it for lasting performance.
Powerful and Efficient
This beer dispenser's 1/3 hp right side compressor uses R290 refrigerant to maintain a temperature range of 36 to 38 degrees Fahrenheit. This specialized refrigerant has an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally responsible choice for your business. It is insulated with CFC-free polyurethane that increases both its energy efficiency and structural strength.
Customer Q&AAsk a Question
Compare to Other Products
Price
Width
Capacity
Compressor Location
Horsepower
Number of Kegs
- Width:
- 79 Inches
- Depth:
- 29 Inches
- Height:
- 52 1/2 Inches
- Interior Width:
- 66 1/4 Inches
- Interior Depth:
- 23 1/8 Inches
- Interior Height:
- 27 3/8 Inches
- Capacity:
- 33.59 cu. ft.
- Tap Tower Diameter:
- 3 Inches
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Attention CA Residents:Need Parts & Accessories?
Show replacement parts and accessories for Beverage-Air DD78HC-1-B-ALT-12T today!
Resources and Downloads for
Beverage-Air DD78HC-1-B-ALT-12T
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Warranty Info
Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.
Related Items
Back Bar Coolers
432 Products
Beer Growlers and Accessories
10 Products
