or enter your email to be instantly sent the price!

Ships free with Plus

Start a Live Chat with a Customer Service rep to receive the price!
Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST.

Due to a manufacturer's price increase, this price will increase by 6% on 07/05/21

Protect Your Product with Safeware

Protection Powered by Safeware

Wish List
Rapid Reorder
  • Holds (3) 1/2 size kegs
  • Four all-stainless steel taps and antimicrobial tubing allow for use with wine, beer, and coffee
  • Durable, steel construction with a stainless steel and wear resistant black vinyl finish
  • Insulated with CFC- and HCFC-free, foamed-in-place polyurethane
  • Uses R290 refrigerant to maintain a temperature range of 36 to 38 degrees Fahrenheit
Shipping: Usually Ships in 5 Weeks
View all Beverage-Air Beer Dispensers

Beverage-Air

Beverage Air Beer Dispensers

Beverage Air Beer Dispensers

About Transcript Embed
A reliable beer dispenser is a must-have for any pub or bar. Beverage-Air offers a great selection of beer dispensers in a variety of sizes, all tested to operate in an ambient environment of up to 100 degrees Fahrenheit. Whether you’re looking for a compact unit or an oversized unit, this product line has something to meet your needs. Standard 28” deep and shallow 23” deep units are also available to best suit your space. Plus, on select models, the front-breathing compressor can be installed on either side; just specify which side at the time of purchase. Dispensers are available with either a black or stainless steel exterior and all feature a galvanized interior with a stainless steel floor. Standard units are built with a stainless steel top, though underbar models are available, as well. Available in either solid or glass, the doors are all outfitted with snap-in gaskets that are easy to replace and feature locks for security during off-hours. They’re also self-closing and field-reversible, with the added bonus of a 90 degree stay-open feature. A stainless steel drip tray is built-in beneath each dispensing tower, which are fully insulated. The units are easy to operate too, with a full electronic control and provided manifolds for immediate use. This series of beer dispensers uses environmentally-friendly R290 refrigerant, which has an ozone depletion potential of 0 and a global warming potential of 3. Beverage-Air beer dispensers are backed by a generous 3 year warranty and are proudly made in the USA.

Copy and paste the embed code above.

Learn all of the ins and outs of Beverage-Air's great selection of Beer Dispensers!

Beer Dispensers

Beer Dispensers

About Transcript Embed
Find the right beer dispenser for your business, and keep your customers coming back for ice cold beer on tap. We offer a large selection of products, including kegerators, back bar coolers, club top beer dispensers to meet your needs. So what is the difference between each of these units? Our commercial kegerators come with 1, 2, and 4 draft arms that can hold from 1 to 5 kegs. If you’re looking to serve draft beer as well as cans and bottles all in one place, we have combination beer dispensing and back bar cooler units. Many of these units have a glass door that provides your guests with a clear view of the bottles inside for excellent merchandising. Our club top beer dispensers feature enclosed spaces for keg storage. Unlike other units, they feature a convenient flip top refrigerated storage area that can be used to store chilled bottles and bar glassware. We offer beer dispensers in black and stainless steel finishes to suit your preferences. Some units are also Energy Star and NSF certified. Whether you have limited space or you are expanding your bar area, we have a beer dispenser for your application.

Copy and paste the embed code above.

Learn the difference between commercial kegerators, back bar coolers, and club top beer dispensers. Coming in different sizes with various features, our selection of beer dispensers will allow you to find a unit that fits your specific needs.

More Videos

Beverage Air Beer Dispensers
Beer Dispensers
Beverage-Air DD72HC-1-B-ALT Specs
Width 72 Inches
Depth 24 3/8 Inches
Height 51 1/4 Inches
Interior Width 60 1/4 Inches
Interior Depth 18 3/4 Inches
Interior Height 27 7/8 Inches
Work Surface Height 36 Inches
Tap Tower Diameter 3 Inches
Phase 1 Phase
Voltage 115 Volts
Capacity 19.95 cu. ft.
Compressor Location Side Mounted
Door Type Solid
Exterior Finish Black / Stainless Steel
Features Coffee Model

Wine Model
Horsepower 1/3 HP
Made in America Yes
Number of Doors 3
Number of Kegs 3 Kegs
Number of Taps 4 Taps
Refrigerant Type R-290
Style 1/2 Barrel
Temperature Range 36 - 38 Degrees F
Type Kegerators / Beer Dispensers

Customer questions about this product

I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?
R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used as an eco-friendly refrigerant by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
Do I need to purchase any additional items along with this beer dispenser?
Yes, couplers, regulators, CO2 tanks, and gas hoses are all sold separately.
What size CO2 tank do I need for this beer dispenser?
The size of the CO2 tank you choose will be determined by the size of your beer dispenser unit and how often you are willing to refill the tank. Larger tanks will last longer than smaller tanks, but frequency and usage should also be taken into consideration. If you plan to store your CO2 tank inside the beer dispenser, then size will be a factor here since you will also need enough room to properly store your kegs. Your local beer supplier will be able to offer suggestions and show you the maximum tank size for your dispenser.
Why is the location of a left or right side mounted condensing unit important?
Consider your kitchen’s layout when choosing whether to have the condensing unit on the right or left side and pick the configuration that will keep the compressor as far from heat sources as possible. By ensuring that your unit’s compressor is farther away from equipment like undercounter dishwashers and hot food holding equipment, you can significantly extend the life of the unit.
Can I order this beer dispenser with a customized number of taps?
Yes, Beverage Air offers a variety of customization options that you can choose from to best suit your needs. Please contact [email protected] with any questions you may have.
What does the “H” or “HC” mean in the newer Beverage-Air model numbers?
This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
Does Beverage-Air warrant this item for use in a food truck?
This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.
Ask your own question!

Beverage-Air DD72HC-1-B-ALT Details

Thanks to its heavy-duty forced air refrigeration system and 3" diameter taps with cold air intake, this Beverage-Air DD72HC-1-B-ALT 2 double tap kegerator beer dispenser helps you serve the coldest beer in town. Featuring (2) 3" insulated towers with 2 faucets each, this kegerator makes it easy to serve your patrons cold, refreshing, perfectly drafted beer. An all-stainless steel tower design and antimicrobial tubing allow you to use this dispenser serve beer, wine, or coffee without the need to retrofit later! This kegerator can hold up to (3) 1/2 size kegs.

Boasting a durable, steel construction with a wear-resistant black vinyl finish, this kegerator withstands the daily demands of your busy bar, pub, or catered event. The top is made of heavy-duty stainless steel for easy cleaning and maintenance while the interior has a reinforced floor and door sills made of heavy-duty stainless steel to resist damage from loading and unloading heavy kegs. Plus, the drip tray helps contain drips and spills for a clean, mess-free operation.

Field reversible, self-closing doors with magnetic gaskets ensure the doors seal tightly each and every time to keep kegs at the proper temperature. This unit also comes equipped with standard door locks to keep your inventory secure after hours and between keg replacements.

This beer dispenser's 1/3 hp compressor runs on eco-friendly R290 refrigerant. This specialized refrigerant has an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally-responsible choice for your business. It is insulated with CFC- and HCFC-free polyurethane that both increases its energy efficiency and structural strength. It requires a 115V electrical connection. The manifold/distributor and beer lines are included.

Overall Dimensions:
Width: 72"
Depth: 24 3/8"
Work Surface Height: 36"
Height: 51 1/4"
Capacity: 19.95 cu. ft.

Interior Dimensions:
Width: 60 1/4"
Depth: 18 3/4"
Height: 27 7/8"

Tap Tower Dimensions:
Column Diameter: 3"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • Made in America

    Made in America

    This item was made in the United States of America.
  • UL Classified EPH

    UL Classified EPH

    This product complies with UL EPH standards and meets ANSI/NSF requirements.
  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.
  • UL Sanitation

    UL Sanitation

    This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Need Parts & Accessories?

View replacements or accessories for
Beverage-Air DD72HC-1-B-ALT

Resources and Downloads for
Beverage-Air DD72HC-1-B-ALT

Specsheet Specsheet Manual Manual Beverage Air's warranty Warranty Beer Dispenser Capacity Chart Keg Capacity Chart Bev Air Beer Dispenser Flyer Flyer bev air 3 in 1 sheet Brochure

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Resources

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

  • Write a text review
    Earn $2.00
  • Post a product photo
    Earn $4.00
  • Post a product video
    Earn $10.00
Login or Register

Find Related Products

3 gallon beverage dispenser   32 oz cup dispenser   5 gallon drink dispenser   bulk cereal dispenser   butcher paper dispenser   cambro beverage dispenser