$4,843.00/Each

Contact us for details

Ships free with Plus

Call 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)

Why do we do this?

Due to a manufacturer's price increase, this price will increase by 3.00% on 01/01/25

Earn up to $145.29 back (14,529 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.

Usually Ships in 4 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Holds (2) 1/2 size kegs
  • Three all-stainless steel taps and antimicrobial tubing allow for use with wine, beer, and coffee
  • Durable, steel construction with a wear-resistant black vinyl finish
  • Insulated with CFC- and HCFC-free, foamed-in-place polyurethane
  • Uses R290 refrigerant to maintain a temperature range of 36 to 38 degrees Fahrenheit
UPC Code:400014342804

Beverage-Air DD48HC-1-B-079 Specs

Quantity
1/Each
Shipping Weight
284 lb.
Width
48 Inches
Depth
24 1/2 Inches
Height
51 1/4 Inches
Interior Width
36 1/8 Inches
Interior Depth
18 5/8 Inches
Nominal Depth
Standard
Interior Height
29 3/8 Inches
Tap Tower Diameter
3 Inches
Amps
2 Amps
Hertz
60 Hertz
Phase
1 Phase
Voltage
115 Volts
Capacity
12.4 cu. ft.
Compressor Location
Right Side Mounted
Compressor Style
Side / Rear Breathing
Door Type
Solid
Exterior Finish
Black
Features
Coffee Model  Made in America  Wine Model
Horsepower
1/4 HP
Insulated
With Insulation
Number of Doors
2 Doors
Number of Kegs
2 Kegs
Number of Taps
3 Taps
Plug Type
NEMA 5-15P
Refrigerant Type
R-290
Style
1/2 Barrel
Temperature Range
36 - 38 Degrees F
Type
Kegerators / Beer Dispensers

Customer questions about this product

Can I order this beer dispenser with a customized number of taps?

Yes, Beverage Air offers a variety of customization options that you can choose from to best suit your needs. Please contact Customer Solutions with any questions you may have.

Do I need to purchase any additional items along with this beer dispenser?

Yes, couplers, regulators, CO2 tanks, and gas hoses are all sold separately.

Does Beverage-Air warrant this item for use in a food truck?

This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.

I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?

R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program.

What does the “H” or “HC” mean in the newer Beverage-Air model numbers?

This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.

What size CO2 tank do I need for this beer dispenser?

The size of the CO2 tank you choose will be determined by the size of your beer dispenser unit and how often you are willing to refill the tank. Larger tanks will last longer than smaller tanks, but frequency and usage should also be taken into consideration. If you plan to store your CO2 tank inside the beer dispenser, then size will be a factor here since you will also need enough room to properly store your kegs. Your local beer supplier will be able to offer suggestions and show you the maximum tank size for your dispenser.
Ask your own question!

Beverage-Air DD48HC-1-B-079 Details

Thanks to its heavy-duty forced air refrigeration system, this Beverage-Air DD48HC-1-B-079 triple tap kegerator beer dispenser with right side compressor helps you serve the coldest beer in town. Featuring 1 tap tower with three faucets, this kegerator makes it easy to serve your patrons cold, refreshing, perfectly drafted beer. An all-stainless steel tower design and antimicrobial tubing allow you to serve beer, wine, or coffee without the need to retrofit later, and the tubing protects against common beverage-spoiling bacteria. This kegerator can hold (2) 1/2 size kegs. Boasting a durable, steel construction with a wear-resistant black vinyl finish, this kegerator withstands the daily demands of your busy bar, pub, or catered event. The top is made of heavy-duty stainless steel for easy cleaning and maintenance. The interior construction includes galvanized steel walls and ceiling, while the floor and door sills are both made from heavy-duty stainless steel to ensure years of long-lasting service and an easy-to-clean design. Plus, the drip tray helps contain liquid for a clean, mess-free operation.

Self-closing doors with magnetic gaskets ensure the doors seal tightly each and every time to keep kegs at the proper temperature. This unit also comes equipped with standard door locks to keep your inventory secure after hours and between keg replacements. This dispenser's full electronic control makes it easy to operate, so it's sure to upgrade your efficiency. This beer dispenser's 1/4 hp compressor uses R290 refrigerant to maintain a temperature range of 36 to 38 degrees Fahrenheit.

This specialized refrigerant has an ozone depletion (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally responsible choice for your business. It is insulated with CFC-free polyurethane that both increases its energy efficiency and structural strength. Automatic, non-electric defrost functionality allows you to use this dispenser without worry, while an epoxy-coated evaporator coil equips it for lasting performance. It requires a 115V electrical connection. The manifold/distributor and beer lines are included.

Overall Dimensions:
Width: 48"
Depth: 24 1/2"
Height: 51 1/4"
Capacity: 12.4 cu. ft.

Interior Dimensions:
Width: 36 1/8"
Depth: 18 5/8"
Height: 29 3/8"

Tap Tower Dimensions:
Column Diameter: 3"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Classified EPH

    UL Classified EPH

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.

  • UL Listed, US & Canada

    UL Listed, US & Canada

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States and Canada.

  • UL Sanitation

    UL Sanitation

    This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Need Parts & Accessories?

Show replacement parts and accessories for Beverage-Air DD48HC-1-B-079 today!

Resources and Downloads for
Beverage-Air DD48HC-1-B-079

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.

Customer Reviews

5.0

Rated 5 out of 5 stars

1 Customer Reviews

1 reviews rated this 5 out of 5 stars.

0 reviews rated this 4 out of 5 stars.

0 reviews rated this 3 out of 5 stars.

0 reviews rated this 2 out of 5 stars.

0 reviews rated this 1 out of 5 stars.

Frequently Mentioned

  • black
  • change
  • clean
  • color
  • finish
  • great
  • hold
  • jet
  • kegerator
  • kegs