$1,949.00/Each

  • 1 self-closing, anti-fog swing glass door
  • Safe for merchandising frozen foods
  • Painted steel housing with foamed-in-place polyurethane insulation
  • Temperature range: -5 to 2 degrees Fahrenheit
  • 4 shelves included
  • Environmentally-safe R290 refrigerant
  • Interior LED lighting
  • 115V, 3/4 hp

Condition:

New
Shipping:

Ships via Common Carrier
Usually Ships in 1 Business Day
When will I receive my item?

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a Call Before Delivery within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your large item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. While the agents will bring the items into the location of your choice, this service does not include set-up of the items being delivered, such as installation of casters, shelves, or other accessories. Small items will not be unpackaged individually; they will be set in place and debris and packaging material will not be removed.

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Running a Manual Defrost Cycle on an Avantco Merchandising Freezer

Running a Manual Defrost Cycle on an Avantco Merchandising Freezer

Running a manual defrost cycle on your GDC series freezer is a simple process and will keep your unit free of harmful ice buildup, which can cause decreased energy efficiency and other potential issues. To begin the manual defrost cycle, press the defrost button for approximately 5 seconds. Repeat to stop the defrost cycle.

Copy and paste the embed code above.

Running a manual defrost cycle on your GDC series freezer will keep your unit operating at its fullest potential. Watch this video to learn more!

Changing the Temperature on an Avantco Merchandiser

Changing the Temperature on an Avantco Merchandiser

Adjusting the temperature on your GDC or GDS series unit is a simple process. Your unit has one of several possible controller options. Depending on the model you purchased, simply follow all the steps that apply to your refrigerator or freezer. If your model has a mechanical controller, adjust the temperature dial. This is located inside the unit, on the ceiling. The coldest setting corresponds to the highest number on the dial. The warmest setting corresponds to the lowest number on the dial. Give the refrigerator or freezer time to adjust to your new settings. The digital display on the front of the unit shows you the current temperature inside the cabinet. You can continue to adjust these settings as needed. If your model has this controller style, 178GDC24FWH, hold set for about one second. The flashing number on the display is the temperature that the refrigerator or freezer is currently set to run. Use the arrow buttons to select the temperature you want your unit to run, and press set again to save your setting. If your model has this controller style, 178GDC40BK, hold set button for about one second. The flashing number on the display is the temperature that the refrigerator or freezer is currently set to run. Use the arrow buttons to select the temperature you want your unit to run, and press set again to save your setting.

Copy and paste the embed code above.

Watch this helpful video to learn how to adjust the temperature on your GDC or GDS series refrigeration unit. There are several different controller options, but this video walks you through each type.

Changing a Lightbulb on an Avantco Merchandiser

Changing a Lightbulb on an Avantco Merchandiser

The lighting in any glass door merchandiser is vital to ensure your products look their best. Today we'll show you how to properly change the lighting on an Avantco GDC or GDS series merchandiser. Before doing anything else, unplug the unit. GDC or GDS units purchased in 2015 or before use bi-pin T8 fluorescent bulbs. Units purchased in 2016 and after have LED lighting. This is 20", 24", 40", or 48" long LED strip, depending on the model. We will show you how to change both types in this video. For fluorescent units, pull the top socket out horizontally from the light fixture. Pull the bottom socket out the same way, holding it firmly to keep the bulb from sliding out. Place the bulb on a level surface and remove the sockets from each end. Remove the bulb from the plastic sleeve. Place the new bulb into the sleeve and replace the sockets. Make sure the prongs in the bulb are secure in the sockets. Place the new bulb into the cabinet, starting with the bottom socket. Once again, be sure to support the bottom socket while installing to keep the bulb from sliding out. Inspect the new bulb to be sure it is secure, and turn the unit back on to ensure the light operates properly. For LED units, begin by unscrewing the collar and unplugging the light strip. Using a flat head screwdriver or other tool, apply pressure to the brackets, gently leveraging the light strips until it snaps out. Once the old light strip is free, secure the new light strip into the mounting brackets. Plug the new bulb into the socket at the top of the unit and secure it using the collar. Inspect the new bulb to be sure it is secure, and turn the unit back on to ensure the light operates properly.

Copy and paste the embed code above.

Changing the lightbulb on your Avantco merchandiser is easier than ever thanks to this helpful tutorial! Whether you have LED or fluorescent lighting, this video shows you exactly how to change the bulb.

Replacing a Gasket on an Avantco Merchandiser

Replacing a Gasket on an Avantco Merchandiser

The gasket is a vital part of any refrigeration equipment, locking cold air inside the cabinet. If the gasket is worn out or torn, your refrigerator or freezer is letting that cold air escape into the kitchen, and using more energy to compensate. Today we'll properly show you how to change a gasket on an Avantco GDC or GDS series merchandiser. Remove the old gasket starting at a corner, and pulling it out of the recessed channel one side at a time. insert a new gasket. Start at a corner, and snap the dart connector into the recessed channel, working your way around the perimeter of the door. Be sure the gasket has a snug fit and closes properly against the cabinet.

Copy and paste the embed code above.

This video gives you step-by-step instructions regarding how to properly change the door gasket on your GDC or GDS series merchandiser. The gasket is a crucial part of any refrigeration equipment, because it keeps cold air inside the cabinet.

How To Program a Carel IR33 Controller on an Avantco Freezer

How To Program a Carel IR33 Controller on an Avantco Freezer

Right here we have a beautiful Avantco freezer with the Carel IR33 controller on it, and we're going to show you how to change the temperature set point. Pretty basic; from the home screen you can see we have the temperature displayed of the unit. We're going to press the "set" button for approximately one second, and the display should flash what your set point is. This one is set for negative 7. We can adjust it to run colder, all the way down to negative 10. Or warmer, it should go all the way up to positive 10. Negative 7 is a nice setting to keep this unit running between 0 and negative 10. You press set again, and it takes you back to your home screen, and saves any adjustments you made to your temperature set point.

Copy and paste the embed code above.

Watch this video to see how easy it is to set or change the temperature on the Carel IR33 controller used on our Avantco CFD series freezers!

Specs
Width 31 1/8 Inches
Depth 33 1/4 Inches
Height 84 3/8 Inches
Interior Width 25 1/4 Inches
Interior Depth 28 3/8 Inches
Interior Height 62 Inches
Amps 9.4 Amps
Hertz 60 Hertz
Phase 1
Voltage 115 Volts
Access Type Doors
Capacity 23 cu. ft.
Color White
Compressor Location Bottom Mounted
Door Style Swing
Door Type Glass
Features LED Lighting
Hinge Location Right
Horsepower 3/4 HP
Installation Type Freestanding
Number of Doors 1
Number of Shelves 4
Sections 1
Split Doors No
Temperature Range -5 - 2 Degrees F

Customer questions about this product

I haven’t heard of R290, R600a, or R513a refrigerant before. What is it?
R290 (also known as high purity propane or CARE 40) and R600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) is an HFO (hydrofluoroolefin) refrigerant. They are being used as an eco-friendly refrigerant by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
Can this item fit through a standard height 80" doorway?
Due to the height of this item, it may not be able to fit through a standard 80" tall doorway when standing upright. Please consider the best means of entry before purchasing, or measure your entryway to ensure that you will be able to bring your order inside if the item cannot be carried on its side.
Ask your own question!

Details

Increase impulse sales of frozen meals, novelty treats, fruits, and vegetables with this Avantco GDC-24F-HC 31 1/8" white merchandising freezer! Designed with sharp looks and usability in mind, this unit is the perfect display for your products with its sleek finish. And, since the housing is made from white coated steel, you can be sure that it will provide superior durability. This unit boasts an anti-fogging glass swing door to ensure that customers always have a clear view of your products, while 4 epoxy coated steel shelves help you stay organized. Plus, the shelves easily adjust to accommodate prepackaged foods in a variety of sizes. Interior LED lighting also works to illuminate and further merchandise your products.

Designed to maintain temperatures from -5 to 2 degrees Fahrenheit, this freezer boasts a bottom-mounted 3/4 hp compressor that runs on eco-friendly R290 refrigerant. This specialized refrigerant has an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally-responsible choice for your business. In addition, the bottom-mounted design makes it easy for employees to load and unload products due to the raised bottom shelf. For optimal temperature retention, the entire cabinet is foamed-in place using polyurethane insulation. Other helpful features include a self-closing mechanism on the door, automatic defrosting, as well as a digital temperature control and display. This item requires a 115V electrical connection for operation.

Overall Dimensions:
Width: 31 1/8"
Depth: 33 1/4"
Height: 84 3/8"

Interior Dimensions:
Width: 25 1/4"
Depth: 28 3/8"
Height: 62"
Capacity: 23 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

  • ETL US & Canada

    ETL US & Canada

    This item meets the electrical product safety standards imposed by the ETL, a division of the Intertek Group, for use in the United States and Canada.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads

Specsheet Specsheet Manual Manual Avantco Refrigeration Service Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register