Watts WD-50-L 100 lb. Low Profile Grease Trap

Watts WD-50-L Details

The Watts 100 lb. low profile grease trap prevents greasy substances from entering plumbing systems, septic fields, and wastewater treatment facilities where they cannot be processed properly and could harm the environment. This unit has a flow restrictor on the inlet side of the interceptor that slows incoming effluent and redirects it through baffling inside the grease trap. As the flow is gradually slowed, lighter than water substances accumulate inside the trap above the static water line. This low profile design is ideal for low clearance applications.

This grease trap features a body constructed of 11-gauge cold rolled steel with an oven-cured, acid-resistant baked gray epoxy coating. Other standard features include a solid steel cover with gasket, a removable baffle assembly, a deep seal trap with cleanout, no hub connections, and an external cast iron flow control fitting (flow restrictor). This unit has a grease capacity of 100 lb., and a flow rate of 50 GPM. It is PDI (Plumbing & Drainage Institute) certified, and meets the industry and PDI Standard PDI-G101 for separation efficiency. This standard specifies that the grease trap must maintain 90% separation efficiency up to its rated grease retention capacity.

Overall Dimensions:
Length: 55"
Width: 33"
Height: 14"
Flow Rate: 50 GPM (Gallons Per Minute)
Grease Capacity: 100 lb.
Inlet & Outlet Size: 4"