$79.99/Each
Ships free with PlusProduct Overview
- Single pivot lever handle
- Cast spout and aerator
- Deck-mounted, 4" centers with 1/2" NPS inlets
- Heavy-duty chrome-plated brass construction, leak-resistant ceramic cartridges
- Temperature rating 40-180 degrees Fahrenheit
Shipping Restrictions
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
Outfit your facility with this Waterloo deck-mounted single lever faucet!
This Waterloo deck-mounted single lever faucet is a great way to regulate water use in your facility! With its pivoting lever handle, this faucet makes it easy and intuitive to adjust the temperature of the water as it leaves the faucet. This faucet uses a ceramic cartridge, which provides a much lower fail rate than the compression cartridges widely used in the industry. Waterloo faucets provide the industry-leading quality you expect.
CSA, US and Canada
This product has been certified by the Canadian Standards Association (CSA) to meet select standards for electrical, plumbing, and/or mechanical products in the United States and Canada.
NSF Listed
This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Chrome-Plated Brass
With heavy chrome-plated brass faucet bodies, ceramic cartridges engineered for durability, and certifications from a wide range of national and local regulatory agencies, you can install this model with confidence.
Consistent Flow Rate
This faucet features a cast spout, while an aerator provides a consistent flow rate and minimal splashing. It boasts a set of 4" centers with 1/2" NPS inlets, and the deck-mounted design is easy to install.
Watertight Seal
In this design, 2 ceramic discs fit together to create a watertight seal when closed. This removes the need for a rubber seat washer, which is one of the most frequently replaced parts on a faucet.
Customer Q&AAsk a Question
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Compare to Other Products
- Spout Length:
- 4 1/2 Inches
- Faucet Height:
- 5 3/8 Inches
Resources and Downloads
A PDF viewer is required to view this product's information. Download Adobe Acrobat software