• For 6 section wedger
  • Quick and easy replacement
  • Comfortable handle
UPC Code: 029419795178
Vollrath Redco Wedgemaster: Cleaning

Vollrath Redco Wedgemaster: Cleaning

Welcome to Vollrath University. I'm Chef Rich, and we're here today to talk about cleaning the Redco manual food processors. Generally speaking of all of these products, a couple of things. A couple of things - one, always clean them as close to the time that you're finished using them as possible. The less time the product has to dry on the unit, the easier it's going to be to clean. Things like the brushes, the types that we supply or one of your own, and hot, soapy water and a good clean towel go a long way to cleaning all of these products. Dishwashers with their harsh chemicals can pit all of the aluminum pieces. There are some pieces on these that we'll add address later that can go through a dishwasher, but generally speaking, anything that we have here that's the aluminum - probably don't want to put that through the dishwasher. Okay, so now let's talk about the Wedgemaster and the Wedgemaster II. These items are specifically designed for citrus - lemons, limes, wedging those products - and those acids from citrus can be very corrosive to metals, especially aluminum. So for that reason, we've made the Wedgemaster II out of polycarbonate. The base is a polycarbonate; the blades are stainless steel. It's 100% dishwasher safe. The Wedgemaster I - this unit is made out of aluminum, so this unit we do not recommend going into the dishwasher. So, as I've said, the Wedgemaster II can be put in the dishwasher. If you want to clean this one in the sink, it's very easy. Both of these units - it's a recommended way for the sink to take the units, take the bottom side, spray the blades off... you can use a bristle brush and some good soapy water to get in there and clean anything that may be stuck, but always from the bottom. Not from the top. If you're going from the top side, the bristles on the brush can actually dull the blade a bit, and it's just not as safe. The pushers on either of the units, again, spray them off. It's probably easiest, or use a good, bristle brush. And a good thing about cleaning any of the Redco products - a good towel and some hot, soapy water to clean them off goes a long way. Just keeping the units nice... mild soap is best. Leave the units to air dry. People ask if you can take a towel and towel them off - sure, you can. I just feel that anytime you've got the towel, it's an opportunity to snag the towel on the blades, and it's just not as safe cleaning around the blades. Leave the unit to air dry, and it'll be fine. Finally, when you're done both units, anything that slides or moves... petrol gel. Okay? This is specifically designed for this use. We don't want to use vegetable oils or anything else on here, as those can dry and get gummy over time. This product is specifically designed for these. And just a little bit on the slides or the uprights when you're done keeps the unit operating smoothly. Okay? Everything is nice and smooth. And that's it. For anything else, more information, please see us online at vollrath.com.

Copy and paste the embed code above.

Properly clean and maintain your Redco Wedgemaster for long-lasting ease! In this short video, Chef Rich from Vollrath University explains the few, simple steps involved in caring for your Redco product.

Vollrath Redco Manual Food Processors

Vollrath Redco Manual Food Processors

Welcome to Vollrath University. I’m Chef Rich, and we’re here today to talk to you about the Vollrath line of manual food processors. The Redco line of food processors can handle a wide variety of tasks in the kitchen: fruit, vegetable, and other types of prep as well. The reasons that we like manual food processors: speed- up to over ten times faster than traditional methods. Labor costs- many times if you’re using less skilled labor or even if you have an operation that uses high school labor, they can use the manual processors versus powered food processors. We like them because we have higher quality. Preparing something fresh at the time you’re going to use it is always going to be better than buying something that’s been prepared off-site in another facility, and consistency. I think that’s probably one of the most important things about the manual processors. No matter who prepares the fruit or the vegetable, or other products that you’re using, they’re always going to look the same. And consistency and any of those products just helps an operation achieve those results that they want to achieve each and every time. The InstaBloom II blooming onion machine. Notice the redesign on this is much safer and easier to use. Competitive designs, the blade assembly can fall on your hands when using it; whereas, the Redco design now has it spring-loaded so it always returns the blades to the top position. Two hand operation for safety, much faster than doing this with a knife; very durable unit. Let’s talk about a high-margin item, a blooming onion- very high-profit item in a restaurant. Redco 5.0, the only unit on the market that can dice, slice, wedge, and core. On the wedger we can do four, six, eight, ten, and twelve sections. Six and eight sections on the corer. But again, the only unit on the market that can do all four of these with a simple change-out of the blades. Notice this thermal set design on the blades makes this changing out super easy. Also this sled leg design on the 5.0. Added strength. And the fact that you can slide a six inch deep sixth size pan underneath the unit for easy prep. The Redco Lettuce King I. Slice and shred lettuce, cabbage, peppers, cucumbers, melons, and even cooked chicken breasts. Eliminates 75% of the time and costs of shredding lettuce with a knife. This unit is much faster. It comes in 3/16”, 1/4”, 3/8”, and 3/4" blade assemblies. Two-year warranty and NSF. The Redco easy clean can openers. Featuring five different styles, we can cut up to a 16” can height. Each unit uses the patented quick-release blade carrier for easy cleaning. No other unit on the market has as fast and easy blade cleanout as this unit has. And the easy clean blades are finished with an anti-bacterial coating for increased safety. Also each unit can be used in a permanent installation, or, with an easy clamp-on design, portable installations as well. All cutting mechanisms are dishwasher safe, and the BCL7000, the Vollrath stainless steel top-of-the-line unit is completely dishwasher safe. And don’t forget these units also carry the two-year warranty and are NSF Certified. The Redco Wedgemaster II. Constructed of durable, dishwasher safe polycarbonate material. It has a well-balanced, stable footprint. Lemons, limes, oranges, onions. It makes prep for a bar or seafood restaurant, lemons and limes, very fast, very easy. So I hope we’ve shown you then the advantages of using the Redco line of manual food processors. Again, the Vollrath line of Redco processors help with speed much faster than traditional methods. Over ten times faster in some cases than what you can do with a knife. Labor costs: we can use less skilled labor or even high school labor if you have that in your operation to prepare foods the same way each and every time. Higher quality preparing on-site. Remember, fresh is best versus something that’s been prepared off-site and stored for a while before it gets to your operation. And then consistency. Doesn’t matter which product line you’re looking at, consistent results help operators achieve consistent results in their restaurants, right? Okay, so remember any product that you have with the Vollrath line is always supported with parts and service from our Vollrath service department. If you should have any more questions, please see us online at Vollrath.com.

Copy and paste the embed code above.

Check out this video and learn about all the great products offered to you from Vollrath! From manual food processors instablooms and lettuce wedgers, there’s a product for any industry in the restaurant business.

Vollrath 326 Specs
Made in America Yes
NSF Listed Yes

Vollrath 326 Details

Continue to create beautifully cored and sliced fruits and vegetables by replacing the pusher head on your Redco 606N Wedgemaster with this Vollrath 326 6 section core pusher head assembly. This pusher block is designed to quickly replace the one that came with your unit so that you can continue to produce premium products with minimal downtime. When paired with the matching blade assembly (sold separately), you can also change the standard cut style of your existing Wedgemaster unit.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • Hand Wash Only

    Hand Wash Only

    To preserve quality, this item should only be hand-washed and sanitized.

Resources and Downloads for
Vollrath 326

Warranty Warranty Vollrath Brand Book - Brochure Brochure

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register