$63.99/Each

  • Creates 8 wedges
  • May be used to change original cut size
  • For use with tabletop or wall mount units

UPC Code:

029419777822

Condition:

New
Shipping:

Usually Ships in 1 Business Day
When will I receive my item?

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Vollrath Redco Thermoset Blades: Cleaning

Vollrath Redco Thermoset Blades: Cleaning

Welcome to Vollrath University. I'm Chef Rich, and we're here today to talk about cleaning the Redco manual food processors. Generally speaking from all of these products, a couple of things. One, always clean them as close to the time you're finished using them as possible. The less time the product has to dry on the unit, the easier it's going to be to clean. Things like the brushes, the types that we supply or one of your own, and hot, soapy water and a good, clean towel go a long way to cleaning all of these products. Dishwashers, with their harsh chemicals, can pit any of the aluminum pieces. There some pieces on these that we'll address later that can go through a dishwasher, but generally speaking, anything that we have here that's the aluminum - probably don't want to put that through a dishwasher. Okay, so let's talk about the Redco units then with the removable, thermoset blade assembles. All of these units here, the Redco 5.0, the 3.5, and the InstaSlice, all use the thermoset blade assembly, which is really nice. These blade assemblies pop right out and are easy to clean. Now, these can go through a dishwasher. They have stainless steel blades, so they're dishwasher safe, and they come out very easily from any of the units. If you don't have a dishwasher or you want to use something like a stiff bristle brush - always from the backside; never from the sharp side... keeping your hands away from the sharp side and the brush doesn't dull the blades a little bit. I think one of the most important things when you're cleaning these products is to never put the aluminum parts through the dishwasher. For that, I recommend just imply a nice, damp towel with some soap on it. Warm water goes a long way to clean things. Again, we can always use our brush if we need to get inside the fingers in the pusher plates or the pusher heads on the 5.0 units, or any stubborn stains. Again, it's always best to do these things as soon as you can right after using the product. That's the InstaSlice with the 5.0s and 3.5s. Another safety feature - remove the pusher heads. Don't try to keep the pusher heads in place and take the blade assemblies off, because if you have your hand here, it's unsafe. You always want to remove this and simply pop the assemblies out. And now they are dishwasher safe. Clean the base with hot, soapy water - never through the dishwasher. Reassemble the product when you're finished. Again now, the blade assemblies always have a key somewhere in it that only allows it to be put in the correct way, so you don't have to worry about putting the blades in right. Back in place... secure firmly. And anything that pivots or moves or slides - petrol gel. A little bit of petrol gel on the uprights will just keep those moving very easily and safely so you don't have to use excess force. It's very simple. Always keep safety in mind... never through the dishwasher... hot, soapy water and a good brush go a long way.

Copy and paste the embed code above.

It's imperative that your food processor equipment is properly cleaned and maintained, so learn the ins and outs of the simple process by watching Chef Rich walk you through the steps.

Details

Add versatility to your existing Vollrath Redco InstaCut 3.5 unit with the Vollrath Redco 15068 8 section wedge replacement blade assembly! These blades are a direct replacement for the ones that came with your Vollrath Redco 15006 and 15022 InstaCut 3.5 units, and may be easily swapped out to reduce downtime during busy periods in your establishment. It may also be used to change the size of another InstaCut 3.5 unit when paired with the appropriate push block.

For maximum convenience, these durable thermoset blades never need to be adjusted and are resistant to corrosion, even when in contact with tomato juice and other acidic substances.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • Hand Wash Only

    Hand Wash Only

    To preserve quality, this item should only be hand-washed and sanitized.

Warranty Warranty Vollrath Brand Book - Brochure Brochure

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Compatible Models

This item is compatible with the listed models, according to the manufacturer. We do our best to keep this listing as accurate and up-to-date as possible. If you have any questions or concerns, feel free to contact a Customer Solutions Specialist before placing your order.

Customer Reviews

  • Overall User Rating: Vollrath 15068 Redco 8 Section Wedge Replacement Blade Assembly for Vollrath Redco 3.5 Fruit and Vegetable Wedger

    5.0 stars from 1 review

    1
    0
    0
    0
    0

    People Talk About:

    wedges Vollrath vegetable serves Redco price potato nice diner cutter

    If you have the Vollrath Redco 3.5 vegetable cutter and your diner serves potato wedges, then the wedge blade is a must. Well built and at a nice price.

    Posted on

User Submitted Photos & Video:

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register