$427.07/Each

Ships free with Plus

or enter your email to be instantly sent the price!

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Earn up to $12.81 back (1,281 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • 4" centers and center shank mounting hole
  • 1/2" NPSM inlet flex hoses with 3/8" compression fittings
  • 4 7/8" cast spout
  • Vandal-resistant 1.2 GPM aerator
  • Mechanical temperature mixing valve
  • Water-resistant control module
  • Powered by AC adapter or (4) AA batteries; low battery LED indicator light
  • Chrome plated brass construction

Shipping Restrictions

This item cannot ship to CA
UPC Code:671262797238

T&S Brass and Bronze Works EC-3103-VF12 Specs

Quantity
1/Each
Shipping Weight
8.65 lb.
Spout Length
4 7/8 Inches
Faucet Width
6 1/8 Inches
Faucet Height
5 1/16 Inches
Battery Type
AA
Faucet Centers
4 Inches
Features
ADA Compliant  Flex Inlets Included  Hands Free  Motion Sensor  With Mixing Valve
Finish
Chrome
Flow Rate
1.2 GPM
Material
Brass
Mounting Holes Required
3 Mounting Holes
Mounting Style
Deck Mounted
Plug Type
NEMA 1-15P
Pressure Rating
125 PSI
Spout Clearance
4 1/16 Inches
Spout Type
Cast
Temperature Rating
140 Degrees F
Type
Touchless Faucets
Water Inlet Size
3/8 Inches

T&S Brass and Bronze Works EC-3103-VF12 Details

The T&S EC-3103-VF12 deck mounted ChekPoint electronic faucet is the perfect solution when you need a reliable hands-free faucet for your handwashing station or commercial bathroom. It boasts a set of 4" centers for easy installation while its 4 7/8" cast spout and vandal-resistant 1.2 GPM aerator deliver gentle water flow that's perfect for handwashing applications. Thanks to its electronic design, this faucet helps eliminate contamination and prevent wasted water.

Water flow is activated by a sensor located at the base of the faucet, and powered by the included AA batteries or AC adapter. When the battery life is low, an indicator light will flash red to alert you. The electric components are housed inside a water-resistant control module, which also has internal flow control setting switches. Three 18" flexible, stainless steel supply lines allow you to connect your faucet to the mechanical temperature mixing valve and hot and cold water supply. With your electronic faucet installed, you can enjoy the convenience and cleanliness of hands-free washing!

Overall Dimensions:
Spout Length: 4 7/8"
Faucet Height: 5 1/16"
Faucet Width: 6 1/8"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

I live in California. Can I purchase this product?

This product cannot be shipped to California.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • 1-15P

    1-15P

    This unit comes with a NEMA 1-15P plug.

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

  • EPA WaterSense

    EPA WaterSense

    This item is certified by the EPA's WaterSense program to meet its standards for water use. WaterSense-labeled products are certified to use at least 20 percent less water, save energy, and perform as well as or better than regular models.

  • 3/8" Water Connection

    3/8" Water Connection

    This unit comes with a 3/8" water connection for water supply.

  • Hands-Free/Touchless

    Hands-Free/Touchless

    This item is designed for hands-free use, which reduces the risk of cross-contamination and prevents germs from spreading.

Resources and Downloads for
T&S Brass and Bronze Works EC-3103-VF12

A PDF viewer is required to view this product's information. Download Adobe Acrobat software