$757.35/Each
Ships free with PlusLogin or enter your email to be instantly sent the price!
Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.
Earn up to $22.72 back (2,272 points)with a Webstaurant Rewards Visa® Credit Card
Product Overview
- 4 7/8" rigid cast spout
- Vandal-resistant 0.5 GPM non-aerated spray device
- Hydro-generator power supply negates the need for batteries or adapters
- 3 5/8" x 4 3/16" x 2" control box, mounts below the countertop
- Thermostatic mixing valve provides pre-set temperature, better control than mechanical valve
- Quantity
- 1/Each
- Shipping Weight
- 5 lb.
- Spout Length
- 4 7/8 Inches
- Faucet Width
- 2 1/4 Inches
- Faucet Height
- 5 1/16 Inches
- Battery Type
- AA
- Faucet Centers
- Single
- Features
- ADA Compliant Flex Inlets Included Hands Free Made in America Motion Sensor With Mixing Valve
- Finish
- Chrome
- Flow Rate
- 0.5 GPM
- Material
- Brass
- Mounting Holes Required
- 1 Mounting Hole
- Mounting Style
- Deck Mounted
- Plug Type
- NEMA 1-15P
- Pressure Rating
- 125 PSI
- Spout Clearance
- 4 1/16 Inches
- Spout Type
- Cast
- Temperature Rating
- 140 Degrees F
- Type
- Touchless Faucets
- Water Inlet Size
- 3/8 Inches
T&S Brass and Bronze Works EC-3102-VF05THG Details
Whether you need to replace an existing faucet or you're working on a new installation, this T&S EC-3102-VF05THG ChekPoint deck mounted electronic faucet is the perfect way to deliver water for handwashing, and its hands-free design works to improve sanitation and reduce the spread of pathogens in your facility too! It boasts a rigid cast spout that measures 4 7/8" long, while the 0.5 GPM non-aerated spray device regulates the flow and reduces splashing without aerating the water. Additionally, it is designed with vandal-resistant components to deter tampering and damage. The faucet's electronics and flow controls are housed in a 3 5/8" x 4 3/16" x 2" water-resistant control module box that installs below the counter. Power is supplied by a convenient hydro-generator system that negates the need for an AC adapter or batteries.
The water temperature can be easily adjusted by using the included thermostatic mixing valve. Designed to install under the countertop with the control box, this valve combines incoming cold and hot water with better temperature control than a mechanical mixing valve, preventing scenarios where hot water overruns the cold water and causes scalding. This faucet connects to your water lines using (2) 18" flex hoses with 3/8" compression x 1/2" NPSM connections. Another 18" water hose and a 24" sensor cable connect the faucet to the control box. It has a single hole base for easy installation.
Overall Dimensions:
Spout Length: 4 7/8"
Faucet Height: 5 1/16"
Faucet Width: 2 1/4"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Customer questions about this product
Can I use this product to serve drinking water?
Does this item have any additional agency approvals and certifications?
What measurements do I need to install a faucet?
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
1-15P
This unit comes with a NEMA 1-15P plug.
3/8" Water Connection
This unit comes with a 3/8" water connection for water supply.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
Made in America
This item was made in the United States of America.
Resources and Downloads for
T&S Brass and Bronze Works EC-3102-VF05THG
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources