$234.22/Each

This product is no longer available. We've left this page up for reference only.

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • 8" centers
  • 2.2 GPM aerator
  • Eterna cartridges
  • 1/2" NPSM male inlets
  • Wrist handles

Shipping Restrictions

This item cannot ship to CA
UPC Code:671262799492

T&S Brass and Bronze Works B-2862-QT-VR22 Specs

Quantity
1/Each
Shipping Weight
6.6 lb.
Spout Length
8 13/16 Inches
Faucet Width
16 Inches
Faucet Height
12 9/16 Inches
Cartridge Type
Compression
Faucet Centers
8 Inches
Finish
Chrome
Flow Rate
2.2 GPM
Handle Type
Wrist
Material
Brass
Mounting Style
Deck Mounted
Mounting Type
Concealed Base
Pressure Rating
20 - 125 PSI
Spout Clearance
5 9/16 Inches
Spout Type
Gooseneck
Temperature Rating
40 - 140 Degrees F
Type
Faucets
Water Inlet Size
1/2 Inches

T&S Brass and Bronze Works B-2862-QT-VR22 Details

This T&S B-2862-QT-VR22 deck mounted medical faucet is the perfect solution when you need a reliable water fixture for hand-washing in your facility. It boasts a set of 8" centers for easy installation while its 11 1/2" swivel gooseneck nozzle and 2.2 GPM aerator deliver gentle water flow that's perfect for hand-washing applications.

This faucet is engineered for maximum durability and uses Eterna compression cartridges to control the water flow. These cartridges provide excellent longevity thanks to a solid brass spindle and body. When the wrist handles of this faucet are turned, the cartridge lifts to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts. Vandal resistant components help prevent tampering with your faucet for added peace of mind.

Overall Dimensions:
Spout Length: 8 13/16"
Faucet Height: 12 9/16"
Faucet Width: 16"

Attention CA Residents:

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

I live in California. Can I purchase this product?

This product cannot be shipped to California.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • CSA, Canada

    CSA, Canada

    This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in Canada.

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Resources and Downloads for
T&S Brass and Bronze Works B-2862-QT-VR22

A PDF viewer is required to view this product's information. Download Adobe Acrobat software