$140.80/Each

Ships free with Plus
Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • 4" centers
  • Vandal-resistant .5 GPM non-aerated spray device
  • Cerama cartridges
  • 1/2" NPSM male inlets
  • Lever handles
UPC Code:671262804783

T&S Brass and Bronze Works B-0871-CR-VR05 Specs

Quantity
1/Each
Shipping Weight
5 lb.
Spout Length
3 3/4 Inches
Faucet Width
8 5/8 Inches
Faucet Height
3 1/4 Inches
Cartridge Type
Ceramic
Faucet Centers
4 Inches
Finish
Chrome
Flow Rate
0.5 GPM
Handle Type
Lever
Material
Brass
Mounting Style
Deck Mounted
Pressure Rating
20 - 125 PSI
Spout Clearance
1 7/16 Inches
Spout Type
Cast
Temperature Rating
40 - 140 Degrees F
Type
Faucets
Water Inlet Size
1/2 Inches

T&S Brass and Bronze Works B-0871-CR-VR05 Details

This T&S B-0871-CR-VR05 deck mounted faucet is the perfect solution when you need a reliable water fixture for hand-washing in your facility. It boasts a set of 4" centers for easy installation while its lavatory spout and vandal-resistant .5 GPM non-aerated spray device deliver gentle water flow that's perfect for hand-washing applications.

Additionally, this faucet is engineered for maximum durability and uses Cerama cartridges to adjust the temperature and flow rate. These cartridges contain ceramic discs that form a long-lasting water tight seal. When the lever handles of this faucet are turned, the discs spin to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.

Overall Dimensions:
Spout Length: 3 3/4"
Faucet Height: 3 1/4"
Faucet Width: 8 5/8"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

  • ICC-ES ASME A112.18.1/CSA B125.1

    ICC-ES ASME A112.18.1/CSA B125.1

    This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Need Parts & Accessories?

Show replacement parts and accessories for T&S Brass and Bronze Works B-0871-CR-VR05 today!

Resources and Downloads for
T&S Brass and Bronze Works B-0871-CR-VR05

A PDF viewer is required to view this product's information. Download Adobe Acrobat software