$180.40/Each
This product is no longer available. We've left this page up for reference only.
Product Overview
- 4" centers
- 0.5 GPM spray device
- Eterna cartridges
- 1/2" NPSM male inlets
- Wrist handles
- Quantity
- 1/Each
- Shipping Weight
- 5.5 lb.
- Spout Length
- 3 3/4 Inches
- Faucet Width
- 12 Inches
- Faucet Height
- 4 15/16 Inches
- Cartridge Type
- Compression
- Faucet Centers
- 4 Inches
- Finish
- Chrome
- Flow Rate
- 0.5 GPM
- Handle Type
- Wrist
- Material
- Brass
- Mounting Style
- Deck Mounted
- Pressure Rating
- 20 - 125 PSI
- Spout Clearance
- 1 7/16 Inches
- Spout Type
- Cast
- Temperature Rating
- 40 - 140 Degrees F
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
T&S Brass and Bronze Works B-0890-QT-VR05 Details
This T&S B-0890-QT-VR05 deck mounted medical faucet is the perfect solution when you need a reliable water fixture for hand-washing in your facility. It boasts a set of 4" centers for easy installation while its integral spout and 0.5 GPM spray device deliver gentle water flow that's perfect for hand-washing applications.
This faucet is engineered for maximum durability and uses Eterna compression cartridges to control the water flow. These cartridges provide excellent longevity thanks to a solid brass spindle and body. When the wrist handles of this faucet are turned, the cartridge lifts to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts. Vandal resistant components help prevent tampering with your faucet for added peace of mind.
Overall Dimensions:
Spout Length: 3 3/4"
Faucet Height: 4 15/16"
Faucet Width: 12"
Customer questions about this product
Can I use this product to serve drinking water?
Does this item have any additional agency approvals and certifications?
What measurements do I need to install a faucet?
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
CSA, Canada
This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in Canada.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
Made in America
This item was made in the United States of America.
ICC-ES ASME A112.18.1/CSA B125.1
This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads for
T&S Brass and Bronze Works B-0890-QT-VR05
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources