$443.02/Each

Ships free with Plus

or enter your email to be instantly sent the price!

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Earn up to $13.29 back (1,329 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • 3 3/16" spout with 15.8 GPM garden hose male outlet
  • Loose key shutoff valve with tee handle
  • Elevated vacuum breaker
  • 1/2" NPT female inlets and outlets on all components
  • Separate components allow you to plumb a custom installation
UPC Code:671262006545

T&S Brass and Bronze Works B-0692 Specs

Quantity
1/Each
Shipping Weight
6.15 lb.
Spout Length
3.8215 Inches
Faucet Width
2 Inches
Faucet Centers
Single
Features
Vacuum Breaker
Finish
Chrome
Handle Type
Tee
Mounting Style
Wall Mounted
Type
Faucets
Water Inlet Size
1/2 Inches

T&S Brass and Bronze Works B-0692 Details

This T&S B-0692 wall mounted service sink hose outlet delivers quality and craftsmanship that you can depend on, whether you're installing this product as a brand new water fixture or replacing an old one. Ideal for a range of janitorial applications, this item lets you plumb a unique setup customized to fit your specific needs, since each part comes independently instead of attached to a single faucet body. The spout is 3 13/16" long with a garden hose outlet that lets you attach a hose for added reach and mobility. It can also maintain a flow rate of approximately 15.8 GPM at 60 psi.

The loose key shutoff valve controls the water flow and is well-suited to applications where tampering or unwanted faucet use is a concern, as the operator must use the included tee handle to turn the valve. Finally, an elevated vacuum breaker works to prevent harmful backflow from entering and contaminating your potable water supply, and this part may be required by local code. The inlets and outlets of each component are 1/2" NPT female for maximum ease when connecting to your water lines. It is rated for operation at temperatures between 40 - 140 degrees Fahrenheit and pressures between 20 - 125 psi.

T&S has been providing commercial applications with innovative plumbing solutions for all of their most pressing needs for more than 70 years! Whether a fixture is needed for handwashing stations, potwashing stations, laboratories, glass fillers, or grooming operations, T&S has the reliable products you need for consistent performance that will withstand the rigors of everyday commercial use. Their catalog features everything from faucets to sinks, dipper wells, and virtually any gas or water connection you might need. For unrivaled selection and quality, check out T&S for all of your plumbing needs!

Overall Dimensions:
Spout Length: 3 7/8"
Faucet Width: 2"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Resources and Downloads for
T&S Brass and Bronze Works B-0692

A PDF viewer is required to view this product's information. Download Adobe Acrobat software