Name: T&S B-0606 Wall Mount Pot and Kettle Filler Assembly with Squeezeless Hook Nozzle, 68" Hose, 4 Arm Handle, and Vacuum Breaker
Brand: T&S Brass and Bronze Works
SKU: 510B0606
Price: 299.47 USD
Availability: LimitedAvailability

A T&S wall mount pot and kettle filler faucet with a hose and nozzle.

A diagram of a T&S wall mount pot and kettle filler faucet with a hose.

$299.47/Each

Ships free with Plus

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Earn up to $8.98 back (898 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

Squeezeless hook nozzle
68" hose
4 arm handle
Vacuum breaker

UPC Code:400011206499

View all T&S Brass and Bronze Works Pot / Kettle Filler Faucets

plus
T&S B-0230-K 1/2" NPT Elbow Installation Kit
$35.91/Each
plus
Easyflex White PTFE Thread Seal Tape 1/2" x 520"
$0.89/Each

Quantity: 1/Each
Shipping Weight: 7.04 lb.
Hose Length: 68 Inches
Faucet Width: 3 1/4 Inches
Faucet Height: 4 15/16 Inches
Cartridge Type: Compression
Faucet Centers: Single
Features: Hook Nozzle Vacuum Breaker
Finish: Chrome
Flow Rate: 3.31 GPM
Handle Type: Lever
Material: Brass
Mounting Style: Wall Mounted
Pressure Rating: 125 PSI
Spout Type: Hose and Fill Valve
Temperature Rating: 140 Degrees Fahrenheit
Type: Pot / Kettle Fillers
Water Inlet Size: 1/2 Inches

Customer questions about this product

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

How is the pre-rinse hose length measured?

Unless otherwise specified, the quoted hose length includes any grips or connectors at the end of the hose, so the actual working length of the hose may be slightly less than described. Please refer to the product's specsheet for more detailed dimensions.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

T&S Brass and Bronze Works B-0606 Details

Install a convenient and practical water fixture in your business with the T&S B-0606 wall mount pot and kettle filler assembly! This assembly features a squeezeless hook nozzle for easy filling and storage without requiring the operator to hold a valve during use. Its 68" stainless steel flex hose provides excellent durability, flexibility, and reach, and its 4 arm handle lets you easily turn the faucet on and off. And thanks to its vacuum breaker, this faucet is protected against backflow.

Overall Dimensions:
Faucet Height: 4 15/16"
Faucet Width: 3 1/4"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
Made in America
This item was made in the United States of America.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.