T&S B-0600 Wall Mounted Pot and Kettle Filler Assembly with 68" Hose, Squeeze Valve, and Vacuum Breaker
Item number 510b0600MFR number B-0600
$336.05/Each
Ships free with
Earn up to $10.08 back (1,008 points)with a Webstaurant Rewards Visa® Credit Card
Usually Ships in 2-3 Weeks from manufacturer
Lead times vary based on manufacturer stock
Product Overview
- 1/2" NPT female inlet; 2" flange
- Hook nozzle with self-closing squeeze valve
- Swivel joint for enhanced range of motion
- Vacuum breaker prevents backflow
Works With
- Quantity
- 1/Each
- Shipping Weight
- 5.92 lb.
- Hose Length
- 68 Inches
- Faucet Centers
- Single
- Features
- Made in America Vacuum Breaker
- Mounting Style
- Wall Mounted
- Spout Type
- Hose and Fill Valve
- Type
- Pot / Kettle Fillers
T&S Brass and Bronze Works B-0600 Details
Quickly and easily fill pots and kettles with this wall mounted T&S B-0600 pot and kettle filler. It features a hook nozzle that will let you fill even large pots and cooking vessels, and then hang it on a wall hook when you're done. This wall mounted filler includes a squeeze valve so you can open and close the flow of water easily, and a vacuum breaker prevents backflow.
Additionally, a 68" flexible stainless steel hose and swivel allows you to bring the nozzle exactly where you need it.
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Attention CA Residents:
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
Made in America
This item was made in the United States of America.
CSA, Canada
This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in Canada.
Questions & Answers
Looking For Specific Info? Get quick answers to product questions with our AI-powered search.
Frequently Asked Questions From Customers
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Resources and Downloads for
T&S Brass and Bronze Works B-0600
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources