Sierra by Noble Chemical 2.5 gallon / 320 oz. Concentrated Instant Floor Finish Emulsifier - 2/Case

Step-By-Step Instructions

Before using the emulsifier, sweep or dust mop the floor to remove any debris. Dilute the concentrate from 1:3 to 1:14 (32 oz. to 9 oz./gal) with cold or warm water, depending on the age and build-up of the finish. Do not use hot water. Apply the solution liberally with a mop to a small area, being sure to completely cover floor to baseboards. After 3 to 5 minutes, agitate the wet section with a mop or machine scrub. Pick up the solution using a mop, wet vac, or automatic scrubber. Rinse the surface thoroughly with clear water to remove residue as necessary. Please note that asphalt tile and rubber flooring could be affected by stripping solutions in high concentrations with hot water. Always test the floor before proceeding.