Regency Stainless Steel Single Deck Overshelf - 18" x 48" x 19 1/4"

A great addition to our regency work table. The shelf is deep enough to accommodate a large microwave easily with room left over for something else. The shelf is built very sturdy but is also very stable. A word of caution, there are no predrilled holes in the work tables to allow for the upper shelf to be attached. Thankfully, we had the tools that we needed, but if you do not your frustration level may exceed the utility of the shelf. The heavier the gage of the base table, the more difficult it is to drill the hole. For our 14 gauge table, I was glad that I had a cobalt bit on hands because traditional HSS bits will burn up on such a strong opponent. To install the shelf you will need High RPM drill Cobalt bit 1/8” or 3/16” WD-40 (spray a little on the bit as you drill to keep it cool) Sharpie to mark the shelf holes Screw driver Wrench A square to ensure the shelf is straight

Over the table shelf mounts great and works as you would expect it too, came with all the necessary hardware needed so easy to install

This added much needed extra storage space. It is sturdy enough to hold the microwave. Would buy again if needed.

This Regency Stainless Steel overshelf fits perfectly on top of my Beverage Air worktop salad prep cooler. It is sturdy enough for placing small to medium size kitchen ware.

these are great for adding space, I had the 12 inch depth one and added this one under it works out great. now I have the 30 inch table with an 18 inch shelf topped with 2 12 inch shelves.

These are very sturdy and they work really well for us. They are easy to install and easy to use. They work really well for us.