This dish sprayer is great! No issues at all. Had it installed by a plumber and it makes washing dishes so much easier. Shipped fast. Highly recommend.
1 out of 3 found this review helpful
Need it sooner?
Waterloo 1.15 GPM Wall-Mount Pre-Rinse Faucet with 8" Centers and 18" Double-Jointed 2 GPM Add-On Faucet
$295.99/Each
Try this Waterloo 1.15 GPM Wall-Mount Pre-Rinse Faucet with 8" Centers and 18" Double-Jointed 2 GPM Add-On Faucet instead! With similar benefits and features, this item is an ideal alternative to your current item.
Regency 1.15 GPM Wall-Mounted Pre-Rinse Faucet with 8" Centers and 18" Double-Jointed Add-On Faucet
Item number 600prw818dj
Works With
Apply, opens link in this tabEarn up to $7.44 back (744 points)
(744 points) with a Webstaurant Rewards Visa® Credit Card
Quick Shipping
Usually ships in 1 business day
Product Overview
- 44" hose with 1.15 GPM spray valve
- Wall-mounted design with 8" centers and 1/2" NPT inlets
- Quarter-turn ceramic cartridges and check valves for high performance
- Easy-to-install faucet base and spray valve with chrome-plated brass construction
- Includes 18" double-jointed add-on faucet (2 GPM), 18" riser, and 6" wall bracket
Shipping Restrictions
This item cannot ship to OR, HI, AZ, WA, ME, CA or NY
UPC Code:400016378610
Works With
Remove the heaviest food debris with this Regency wall-mounted pre-rinse faucet!
Vital to any dishroom, this unit is perfect for rinsing excess food off your dishes before cleaning them in a commercial dish machine so that dishes come out clean and ready to use. It's also great for filling up sink compartments to complete your warewashing tasks, or for mixing up cleaning solutions in sanitation pails. This unit uses ceramic cartridges that provide a much lower fail rate than compression cartridges. In this design, 2 ceramic discs fit together to create a watertight seal when closed, removing the need for a rubber seat washer. Additionally, the check valves prevent backflow for added dependability.
CSA, US and Canada
This product is certified by CSA to applicable U.S. and Canadian standards.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
NSF Certified
This item is certified by NSF to applicable standards.
Powerful Spray Valve
The 1.15 GPM spray valve gives you the power needed to blast away food debris while being easy on your water bill. A 44" long flexible hose gives you plenty of reach to deliver water where you need it, letting you handle delicate glassware and dinnerware or bulky items like pots and pans.
Double-Jointed Faucet
A double-jointed 18" add-on faucet is included for when you need a regular faucet instead of a spray valve. Each section can be rotated independently or folded to the side for large or bulky items. It comes with a 2 GPM aerator at the outlet, helping to regulate the stream and reduce splashing.
Easy Installation
This wall-mounted faucet comes with 8" adjustable centers for easy installation, and the 1/2" NPT inlet connections make it simple to connect to your facility's water lines. This unit also comes with an 18" riser and a 6" wall bracket to secure it to the wall for added stability.
Regency Brand
Designed with a chrome-plated brass faucet body and ceramic cartridges, it's easy to see why Regency pre-rinses are a great solution for any business. Offering functionality and unbeatable value, Regency is your source for quality commercial furnishings and equipment.
Questions & Answers
Looking For Specific Info? Get quick answers to product questions with our AI-powered search.
By using this AI-powered search, you agree to our Terms of UseOpens in new tab and Privacy PolicyOpens in new tab.
Frequently Asked Questions From Customers
Can I get a spray valve with a higher flow rate (GPM)?
The maximum flow rate for all commercial pre-rinse spray valves produced after January 28, 2019 is 1.28 GPM – more specific regulations may apply based on the valve’s spray force in ounce-force (ozf).
Product Class 1 (5 ozf or less) – Max Flow Rate: 1 GPM
Product Class 2 (5.01 - 8 ozf) – Max Flow Rate: 1.2 GPM
Product Class 3 (over 8 ozf) – Max Flow Rate: 1.28 GPM
These regulations do not impact spray valves made before January 28, 2019, and are implemented by the US Department of Energy in an effort to improve energy conservation.
Product Class 1 (5 ozf or less) – Max Flow Rate: 1 GPM
Product Class 2 (5.01 - 8 ozf) – Max Flow Rate: 1.2 GPM
Product Class 3 (over 8 ozf) – Max Flow Rate: 1.28 GPM
These regulations do not impact spray valves made before January 28, 2019, and are implemented by the US Department of Energy in an effort to improve energy conservation.
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
Does this item ship to Canada?
This product cannot be shipped to Canada.
How do I use a wall bracket to stabilize a pre-rinse faucet?
Pre-rinse faucets with a riser may include a wall bracket to help use the wall for added stability. Pre-rinse faucets without a riser will generally not include or need a wall bracket.
If your unit comes with a bracket, or you plan on adding one, the bracket can be installed at whatever height you prefer, but to be effective it should be placed far enough above the base so as to inhibit movement to the riser – placing too close to the base may make it ineffective.
If you intend to use a wall bracket, consider potential concerns with the installation location, such as shelving or windows behind the faucet, that might limit where you can place the bracket.
How is the pre-rinse hose length measured?
Unless otherwise specified, the quoted hose length includes any grips or connectors at the end of the hose, so the actual working length of the hose may be slightly less than described. Please refer to the product's specsheet for more detailed dimensions.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
What parts do I need to install my new faucet?
For both wall and deck mounted faucets, installation kits are sold separately. Check the Works With items to find the proper installation kits and parts!
Compare to Other Products
Price
Hose Length
Faucet Centers
Mounting Style
Overall Dimensions:
- Faucet Height:
- 40 7/8 Inches
- Faucet Width:
- 8 Inches
- Add-On Faucet:
- 18 Inches
Attention CA Residents:Need Parts & Accessories?
Shop replacement parts and accessories for this item today!
Resources and Downloads
A PDF viewer is required to view this product's information. Download Adobe Acrobat softwareOpens in new tab
Customer Reviews
Customer Photos & Videos
Customers Say
Customers report mixed experiences with this dish sprayer. Common issues include the spray head cracking and malfunctioning, leading to water spraying in unintended directions. Some users have resolved initial problems by cleaning debris from the spray heads. Opinions on overall quality and reliability vary.
- spray
- heads
- placed
- sprayer
- debris
- dishes
- installed
- reviews
- water
- attempted
This AI-generated summary was created from real customer reviews
- Add-On Faucet Length:
- No Add-On Faucet
After reading the reviews I was hesitant, but decided to try it anyways. When I received it, it came with two black plastic spray heads. Placed one in and installed everything. When I attempted to spray, it shot water everywhere in multiple directions. I thought the reviews were correct. I removed the head and placed second insert in. Same results. I then looked at the spray heads and noticed debris in several of the holes. After running water through them backwards and taking a small pick and removing the debris, I placed one back into sprayer and worked like a charm. Very defined spray pattern and lots of pressure behind. I'm only 3 weeks into use, so I will see if I have any issues with it cracking over time, but So Far So Good.
- Add-On Faucet Length:
- 10"
I bought one two years ago, and I wish they sell their rubber gaskets to replace it
Thank you for your review, Ignacio! We offer some replacement parts for this unit under the "Need Parts & Accessories" banner. Please reach out to our Customer Solutions team if you require further assistance!
- Add-On Faucet Length:
- 6"