$4,024.87/Each

Ships free with Plus

Protect Your Product with Safeware

Protection Powered by Safeware

  • Produces up to 816 lb. of ice per day
  • Half size cubes (3/8" x 1 1/8" x 7/8")
  • Produces less noise thanks to patented cool vapor defrost (CVD) technology
  • Remote design lowers ambient temperature near your ice machine
  • Intelligent diagnostics provide feedback for preventative maintenance
  • DuraTech front panel for easy cleaning and fewer hard water stains
  • Includes EasyRead informative display
  • Programmable ice production saves energy and reduces waste
Shipping: Usually Ships in 3 Business Days

You May Also Need
View All Items

Manitowoc Indigo Ice Machine

Manitowoc Indigo Ice Machine

Why do I love my Indigo? Beverage and ice are a huge part of my business. We go through a ton of ice, so when it came to selecting our ice machine, I had to get it right. First thing I noticed about the Manitowoc Indigo is the easy-read display. I had never seen an ice machine with a screen before. Now that I have one, I don't understand why all ice machines don't have a display. Hey, I get it. Using an ice machine is easy, but figuring out what's going on inside? Not so easy. The easy-read display changes all of that. Now, I know my machine is working all the time, and when it comes to cleaning, Indigo is a breeze. If you've ever owned an ice machine, you know that cleaning can be a hassle, but it has to be done. People eat ice, right? No problem with Indigo. The machine lets me know when it's time to clean. It's almost twice as fast with a lot of process automated, and there's even a countdown timer so I can tell how long until it is finished cleaning. It also alerts me when it's time to change the air or water filter so I don't have to keep track. The easy-read display helps me lower operating costs as well. I can even set it up to maximize ice production during peak periods and produce less when traffic is light, and over time, that saves a lot on my utility bill. In this business, there's just a couple of us here running the store. I need equipment that I can rely on, that's easy to use, and easy to clean. That's why I love my Indigo.

Copy and paste the embed code above.

Both easy to use and clean, Manitowoc's ice machines are a cost-efficient alternative to traditional ice machines. It has an easy-read display and can be programmed to maximize ice production during high-traffic periods.

Manitowoc: Preventive Maintenance Cleaning Indigo NXT

Manitowoc: Preventive Maintenance Cleaning Indigo NXT

Hello, and welcome to Manitowoc's service training center, here in Manitowoc, Wisconsin. My name is Jonathan and today we're going to be looking at the preventative maintenance remedial cleaning of the Indigo NXT ice machines. Today, for this example, we're going to use the IYT0450A-161 ice machine, so let's go ahead and get started! Now it's very important you only use Manitowoc-approved cleaners for cleaning ice machines, part #9405463 and Manitowoc ice sanitizer, part #9405653. While performing these procedures, do not mix the cleaner and sanitizer together, as the solutions will cancel each other out. Wear rubber gloves and safety glasses when handling the ice machine cleaner or sanitizer. For more detailed information on these procedures, refer to the installation, operation, and maintenance manual that comes with the ice machine. You can download a copy from our website, www.manitowocice.com. You are responsible for maintaining the ice machine in accordance with the installation, use, and care manual. Maintenance procedures are not covered under normal warranty and they should be performed at least every six months. If the ice machine requires more frequent cleaning and sanitizing, consult a qualified service company to test the water quality and recommend appropriate water treatment. While you may do remedial cleanings more often, deep cleanings should be performed every six months. This involves removing all the food zone components for a thorough deep cleaning and sanitizing. Manitowoc does offer integrated devices such as Luminice® and iAuCS® to help extend the time between deep cleanings. Check our website for those solutions. So, before we get started on today's procedure, we're going to need a few items. We will need some Manitowoc ice machine cleaner, we will need some Manitowoc ice machine sanitizer, some gloves, some safety glasses. External cleaning suggestions: before we clean the inside of the machine, let's look at the outside. Clean the area around the ice machine as often as necessary to maintain cleanliness and efficient operation. Wipe surfaces with a damp cloth rinsed in water to remove dust and dirt from the outside of the machine. If a greasy residue persists, use a damp cloth rinsed in a mild dish soap and water solution. Wipe dry with a clean cloth. Exterior panels have a clear coating that's stain-resistant and easy to clean. Products containing abrasives will damage the coating and scratch the panels. Indigo NXT uses DuraTech aluminum panels that are easy to clean and have a better corrosion resistance than stainless steel. Never use steel wool or abrasive pads for cleaning. Never use chlorinated, citrus-based, or abrasive cleaners on exterior panels and plastic trim pieces. Ice machine cleaner is used to remove lime scale and mineral deposits. Ice machine sanitizer disinfects and removes algae and slime. Step 1: open the front cover and then put the machine into manual harvest. Note: although no requirement and dependent on your installation, removing the ice machine top cover may allow easier access. An alternative to manual harvest is to program the ice machine off, allowing the ice in the bin to be used up or melt. Never use anything to force ice from the evaporator: damage may result. Step 2: press the clean button and follow the prompts. Select "continue" and then press the right arrow. Select "make ice when complete." Water will flow through the water dump valve and down the drain. Wait approximately 1 minute until the water trough refills and the display indicates "add chemical." Add the proper amount of ice machine cleaner or sanitizer to the water trough by pouring between the water curtain and evaporator, then confirm that the chemical was added. Wait until the clean cycle is complete, approximately 24 minutes. This is depending on the incoming water pressure, which affects the length of the rinse and flush cycles. The clean cycle comprises of 10 minutes of washing followed by 6 rinses and flushes. Now you can close and secure the front door. The ice machine will automatically start to make ice after the clean cycle is complete. This takes approximately 24 minutes. And there you have it: the preventative maintenance remedial cleaning is complete and this machine is ready for another 6 months of efficient operation. Hope you can join us again soon on one of our webcasts or one of our informative videos here from Manitowoc, Wisconsin!

Copy and paste the embed code above.

Regular preventative maintenance cleanings are important for keeping your ice machine running smoothly. Watch this video to learn how to properly clean and sanitize Manitowoc Indigo NXT ice machines.

Manitowoc: Detailed Cleaning & Sanitation Indigo NXT

Manitowoc: Detailed Cleaning & Sanitation Indigo NXT

Hello, and welcome to Manitowoc Ice service training center, here in Manitowoc, Wisconsin. My name is Jonathan and today we're going to be showing you the procedures for cleaning and sanitizing Indigo NXT ice machines. We're using the IYT0450A-161 for this example today. Now it's very important you only use Manitowoc-approved cleaners for cleaning ice machines, part #9405463 and Manitowoc ice sanitizer, part #9405653. While performing these procedures, do not mix the cleaner and sanitizer together, as the solutions will cancel each other out. Wear rubber gloves and safety glasses when handling the ice machine cleaner or sanitizer. For more detailed information on these procedures, refer to the installation, operation, and maintenance manual that comes with the ice machine. You can download a copy from our website, www.manitowocice.com. You are responsible for maintaining the ice machine in accordance with the installation, use, and care manual. Maintenance procedures are not covered under normal warranty and they should be performed at least every six months. If the ice machine requires more frequent cleaning and sanitizing, consult a qualified service company to test the water quality and recommend appropriate water treatment. While you may do remedial cleanings more often, a deep cleaning should be performed every six months, which we are showing you today. This involves removing all the food zone components for a thorough deep cleaning and sanitizing. Manitowoc does offer integrated devices such as Luminice® and iAuCS® to help extend the time between deep cleanings. Check our website for those solutions. So, before we get started on today's procedure, we're going to need a few items. We will need a bucket, we will need some Manitowoc ice machine cleaner, we will need some Manitowoc ice machine sanitizer, need a sponge, some brushes, some gloves, some safety glasses, a spray bottle, and some food-grade sanitary lubricant for the O rings. External cleaning suggestions: before we clean the inside of the machine, let's look at the outside. Clean the area around the ice machine as often as necessary to maintain cleanliness and efficient operation. Wipe surfaces with a damp cloth rinsed in water to remove dust and dirt from the outside of the machine. If a greasy residue persists, use a damp cloth rinsed in a mild dish soap and water solution. Wipe dry with a clean cloth. Exterior panels have a clear coating that's stain-resistant and easy to clean. Products containing abrasives will damage the coating and scratch the panels. Indigo NXT uses DuraTech aluminum panels that are easy to clean and have a better corrosion resistance than stainless steel. Never use steel wool or abrasive pads for cleaning. Never use chlorinated, citrus-based, or abrasive cleaners on exterior panels and plastic trim pieces. Ice machine cleaner is used to remove lime scale and mineral deposits. Ice machine sanitizer disinfects and removes algae and slime. Step 1: open the front cover and then put the machine into manual harvest. Note: although no requirement and dependent on your installation, removing the ice machine top cover may allow easier access. An alternative to manual harvest is to program the ice machine off, allowing the ice in the bin to be used up or melt. Never use anything to force ice from the evaporator: damage may result. Step 2: remove all the ice from the bin. Step 3: press the clean button and follow the prompts. Select "continue" and then press the right arrow. Select "turn off when complete." Water will flow through the water dump valve and down the drain. Wait approximately 1 minute until the water trough refills and the display indicates "add chemical." Add the proper amount of ice machine cleaner to the water trough by pouring between the water curtain and evaporator, then confirm that the chemical was added. Step 4: Wait until the clean cycle is complete, approximately 24 minutes. This is depending on the incoming water pressure, which affects the length of the rinse and flush cycles. The clean cycle comprises of 10 minutes of washing followed by 6 rinses and flushes. After complete, disconnect power to the ice machine and dispenser, when used. Step 5: remove parts for cleaning. Single evaporator is being used in this example. Each evaporator will have a distribution tube and a water curtain or damper assembly. Remove the water curtain. Gently flex the curtain in the center to remove it from the right side, slide the left pin out, and remove the curtain from the machine. Next, remove the ice thickness probe. Compress the hinge pin on top of the ice thickness probe, pivot the ice thickness probe to disengage one pin, then the other. The ice thickness probe can be cleaned at this point without complete removal. If complete removal is desired, disconnect the wiring from the control board. Remove the water trough. Depress the tabs on the right and left side of the water trough. Allow the rear of the water trough to drop as you pull it forward. This is to clear the water pump. Remove the water level probe. Pull the probe straight down to disengage. Lower until the wiring connector is visible. Disconnect the connector, and then remove the probe from the machine. Remove the water distribution tube. Note: thumb screws for the distribution tube are retained to prevent loss. Loosen the thumb screws but do not pull thumb screws out of the distribution tube. Loosen the outer screws and pull forward on the tube to release from the slip joint. On larger machines, you will need to disassemble the distribution tube by loosening the two middle thumb screws and dividing the assembly into two pieces. Step 6: Mix a solution of cleaner and lukewarm water. Depending upon the amount of mineral buildup, a larger quantity of solution may be required. Use the ratio of 1 gallon of water to 16 ounces of cleaner to thoroughly clean all parts. Step 7: Use half of the cleaner and water solution to clean all components. The cleaner solution will foam when it contacts the lime scale and mineral deposits. Once the foaming stops, use a soft, bristled nylon brush, sponge, or cloth, but not a hard ward wire brush, to carefully clean the parts. Soak parts for 5 minutes or 15 to 20 minutes for heavily scaled parts, with the exception of the ice thickness probe and the water level probe. Rinse all components with clean water. Step 8: While the components are soaking, use half of the cleaner and water solution to clean all food zone surfaces of the ice machine and bin or dispenser. Use a nylon brush or cloth to thoroughly clean the following ice machine areas: 1. the side walls, 2. the base area above the water trough, 3. evaporator plastic parts, including the top, bottom, and sides, 4. the bin or dispenser, 5. rinse all the areas thoroughly with clean water. If a hose is not available, you can use a bucket of clean water. Step 9: mix a solution containing 2 ounces of sanitizer mixed with 3 gallons of lukewarm water. Step 10: Use half of the sanitizer and water solution to sanitize all removed components. Fill a spray bottle and liberally apply the solution to all surfaces of the removed parts, or soak the removed parts in the sanitizer and water solution. Do not rinse the parts after sanitizing. Do not submerge or soak the ice thickness probe or water level probe in the sanitizer. Step 11: use the other half of the sanitizer and water solution to sanitize all food zone surfaces of the ice machine and bin or dispenser. Use a spray bottle to liberally apply the solution. When sanitizing, pay attention to the following ares: 1. the side walls, 2. the base, the area above the water trough, 3. Evaporator plastic parts, including the top, bottom, and sides, 4. the bin or dispenser. Do not rinse the sanitized areas. Step 12: apply a small amount of food-grade sanitary lubricant on any O rings and replace all components. It's important to wait 20 minutes to allow the sanitizer to disinfect. Step 13: Reapply power. Press the "clean" button. Follow the prompts, select "continue," then press the right arrow. Select "make ice when complete". Water will flow through the water dump valve and down the drain. Wait approximately 1 minute until the water trough refills and the display indicates "add chemical." Add the proper amount of ice machine sanitizer to the water trough by pouring between the water curtain and the evaporator, then confirm the chemical was added. Step 14: Now you can close and secure the front door. The ice machine will automatically start to make ice after the sanitize cycle is complete. This takes approximately 24 minutes. So there you have it: the interior cleaning and sanitizing procedure is complete and you should be ready for another 6 months of efficient operations. Hope to see you next time on one of our videos or one of our informative webcasts here from Manitowoc, Wisconsin. I hope to see you soon. Thank you.

Copy and paste the embed code above.

Performing regular deep cleaning and sanitizing on your equipment is essential for ensuring that it continues to run efficiently and for maintaining food safety. Watch this video to learn how to perform a detailed cleaning on Manitowoc Indigo NXT ice machines.

Manitowoc: Air Filter Removal & Cleaning Indigo NXT

Manitowoc: Air Filter Removal & Cleaning Indigo NXT

Hello, and welcome to Manitowoc Ice service training center here in Manitowoc, Wisconsin. My name is Jonathan, and today we're going to be looking at removing and cleaning the air filter on air-cooled Indigo NXT ice machines. We'll also take a look at inspecting and cleaning the condenser coil on this air-cooled IYT0450A-161 that I have for an example today. Please note, these instructions are intended to be used by trained ice machine technicians only. Now remember, disconnect the electrical power to the ice machine at the service switch before cleaning the air filter or the condenser. The condenser fins are sharp; use care when removing or installing the air filter. For a more detailed procedure, refer to the installation, operation, and maintenance manual that comes with the ice machine, or you can download a copy from our website, www.manitowocice.com. You are responsible for maintaining the ice machine in accordance with the installation, use, and care manual. Maintenance procedures are not covered under normal warranty, and they should be performed at least every 6 months. If the ice machine requires more frequent cleaning and sanitizing, consult a qualified service company to test the water quality and recommend appropriate water treatment. While you may do remedial cleanings more often, a deep cleaning should be performed every 6 months. This involves removing all the food zone components for a thorough deep cleaning and sanitizing. Manitowoc does offer integrated devices such as Luminice® and iAuCS® to help extend the time between deep cleanings. Check our website for those solutions. So these are the items that we'll be using today: gloves, safety glasses, screwdriver, flashlight, fin comb, spray bottle, degreaser, compressed air, and some warm water. On self-contained air-cooled ice machines, there is a washable air filter designed to catch dust, dirt, lint, and grease. It's located on the rear of the ice machine. Clean the filter once a month with mild soap and water. A dirty air filter restricts air flow, resulting in excessively high operating temperatures. This reduces ice production and shortens component life. The air filter and baffle have been updated for ease of removal. The air baffle has keyways where the screw heads go through. The air filter is located in a track and held in place by the air baffle on the rear left corner of the machine. In addition, we've added grab tabs to make it easier to remove the air filter. Let's get started! Step 1: turn off the ice machine, disconnect power, and perform a lockout-tagout procedure. Step 2: remove the air baffle by lifting up and disengaging the keyway. Step 3: grab the air filter by one of the tabs and slide out. Step 4: washing the air filter. If it's dirty with lint, take it over to the sink and wash it with warm water. Spray some warm water opposite of the airflow on the filter. If it's dirty with grease, you can use some mild soap on the filter like dishwashing liquid, and then spray the warm water opposite of the airflow again. Put the air filter to the side and allow it to air dry. It's also important to inspect or clean the condenser. If an air filter has not been cleaned on a regular basis or if the equipment is in an excessively dirty location, the condenser may be dirty and restrict airflow. Shine a flashlight through the condenser to check for dirt between the fins. If the condenser is dirty or restricted, the light you shine through the condenser, you may not see much of it coming through. If this is the case, you should go ahead and clean that condenser coil. To clean the condenser coil, we need to first determine if it's dirty with lint, dust, or if it could be grease on the condenser coil. If it's lint or dust, we're going to brush the outside of the condenser with a fin comb or brush, and we can blow compressed air, CO2, or even nitrogen from the inside out, opposite the normal direction of the airflow. Remember, blowing dust out of the condenser may cause the dust to go airborne and contaminate other equipment. Try to even contain the dust by using wet rags or relocate the equipment to a ventilated area. Now, if it's dirty with grease, we're going to want to clean with degreaser and water. Spray degreaser on the surface of the condenser from the outside of the machine, and then use warm water from the inside to rinse the degreaser out of the condensing coil. Allow the condenser to air dry. Remember: ensure that water is not exposed to any electrical components. This process will require the ice in the bin to be discarded, as well as the bin to be cleaned and sanitized afterwards. After the condenser and the air filter are clean and dry, we'll want to reassemble the ice machine. Reapply power, press the on/off button, and start the ice making sequence of operation. Close and secure the door. And there you have it: the air filter removal and condenser cleaning procedure is complete, and you should be ready for another 6 months of operation. Hope to see you next time on one of our videos or one of our informative webcasts here from Manitowoc, Wisconsin. See you soon!

Copy and paste the embed code above.

Keeping the air filter on your air-cooled ice machine clean is essential for ensuring efficient operation. Watch this video to learn how to remove and clean the air filter on Manitowoc Indigo NXT ice machines.

Manitowoc: Removal from Service & Winterization Indigo NXT

Manitowoc: Removal from Service & Winterization Indigo NXT

Hello, and welcome to Manitowoc Ice service training center, here in Manitowoc, Wisconsin. My name is Jonathan, and today we're going to show you how to remove an ice machine from service and winterize it. We're going to look at 2 ice machines today, an IYT0450A air-cooled ice machine and an IYT0450W water-cooled ice machine. The water-cooled ice machine winterization instructions will be a little more in-depth than the air-cooled instructions. Please note, these instructions are intended for use by trained ice machine technicians. For safety, you can find more detailed information in your installation, operation, and maintenance manual that comes with the ice machine, or you can download a copy of this from our website, www.manitowocice.com. The following procedure is for all Indigo NXT models, including water-cooled ice machines. Prior to removing an ice machine from service and winterization, it's important to clean and sanitize the ice machine as discussed in the detailed cleaning and sanitation video, as well as the installation, use, and care manual. After cleaning and sanitizing the ice machine, insure the ice machine is turned off. Turn off the water supply, disconnect the incoming ice-making water line - marked as "in" - and the ice-making drain line - marked as "out" - at the rear of the ice machine. Don't forget about draining the water trough by removing it. The ice machine should still be energized, so navigate to the enable or relay screen in the service menu by pressing "menu", "service", "diagnostics", "control board", and then press "enable all relays". This is to energize and open the water inlet and dump valve. Blow compressed air or dry nitrogen in both incoming water and drain openings at the rear of the ice machine to remove all water from the lines. It's recommended to use 50 PSI air pressure, or nitrogen, and not to exceed 80 PSI. For water-cooled models, you'll need to blow out the water from the condensing coils. Water-cooled condenser models use water to cool the refrigeration system, a tube-in-tube heat transfer. If the ice machine is exposed to below-freezing temperatures with water in the condenser, it could lead to rupturing the refrigeration lines and system contamination. It's very important that you blow compressed air through the condenser until no water remains. Damage to the condenser from freezing temperatures is not covered under warranty. Disconnect the incoming water and drain lines for the water-cooled condenser. Start the ice machine in the ice making mode and wait for the freeze cycle to begin. This will take approximately 3 minutes. The increasing pressure will open the water regulator valve, and you may see water start to come out of the condenser connections. This is a sign that the regulating valve is opening. At this point, take your compressed air or dry nitrogen and start putting pressure through the condenser until no water remains. As soon as all the water has stopped coming out, turn off the machine immediately so that the machine does not trip out on a high pressure situation. Next, disconnect the electrical power and perform a lockout-tagout procedure. Then, replace all the panels. And there you have it: removal from service and winterization procedure is complete. Hope to see you again soon in one of our informative videos or webcasts here from Manitowoc, Wisonsin. See you soon!

Copy and paste the embed code above.

Learn how to properly remove your Manitowoc Indigo NXT ice machine from service and prepare it for winter by watching this informative video.

Manitowoc Ice IYF0900C-161 Specs
Width 30 Inches
Depth 24 1/2 Inches
Height 26 1/2 Inches
Amps 1.1 Amps
Hertz 60 Hertz
Phase 1 Phase
Voltage 115 Volts
24 Hour Ice Yield 500 to 975 Pounds

816 Pounds
Condenser Type Remote
Energy Star Qualified Yes
Ice Type Half Size Cubes
NSF Listed Yes
Power Usage 4.93 kWh per 100 lbs.
Type Ice Machines
Water Usage 19 Gallons per 100 lbs.

Customer questions about this product

How do I match up ice machines, bins, and dispensers?
To help you find the right bin / dispenser / machine combination for your needs, you'll find manufacturer recommended ice bins and dispensers listed in the You May Also Need items on each ice machine's product page. Dispensers and ice bins will have manufacturer recommended ice machines listed in the You May Also Need items on their pages. If the bin or dispenser is wider than the ice machine, additional adapters, deflectors, and/or top kits may be necessary to join the machine to the bin. Please refer to the provided documentation on the ice machine and ice bin / dispenser product pages for more information.

Additionally, adapter and deflector kits can be used to match up ice machines with other types of bins / dispensers. When available, literature from the manufacturer regarding bin/ dispenser / machine compatibility and adapter / deflector kits is also included on our product pages and is kept as up-to-date as possible. If you have any questions, our Customer Solutions team is also happy to help!
Does this ice machine come with a condenser?
No, you have to purchase the condenser separately and you may have to purchase additional line kits for the refrigerant. These items are listed in the “You May Also Need” items for compatible condensers and/or ice machines, along with any literature provided by the manufacturer to help you get what you need.
Why is a water filter automatically added to my cart with this item?
The use of poor quality feed water may void your equipment's warranty. Therefore, it’s important that your water be filtered to the highest quality and a compatible water filter will be included when you add this piece of equipment to your cart. You may remove the filter from the cart prior to purchase.
Will this ice machine meet my business’s ice demand?
Every business type has unique demands for ice. If you have any questions about how much ice you’ll need please reference our Types of Ice Machines buying guide.
What does the "T" or "F" mean in the new Manitowoc model numbers?
This indicates that the unit is using R290 refrigerant, a more eco-friendly refrigerant. Although the new models are identical to the older models, Manitowoc has phased out the production of units without R290 refrigerants in response to the EPA’s Significant New Alternatives Policy (SNAP) program. Read more about this program in our blog post on Refrigerant Regulations. Refrigerant Regulations.
My ice machine has been shut down, or not in use since the COVID-19 shutdowns, how should I restart it?
If your ice machine has been shut down or not in use for a prolonged period time, please reference your machine's user-manual for a restart procedure, often called “Winterization." Please reference your user manual or contact customer service with any questions.
Ask your own question!

Manitowoc Ice IYF0900C-161 Details

Make more ice with less ambient noise using this Manitowoc IYF0900C Indigo series QuietQube 30" remote cooled ice machine! Its innovative cool vapor defrost (CVD) technology achieves quieter operation than comparable remote condenser units because the CVD system lets you place the machine farther from the remote condenser. This means less noise reaches the customer environment when compared to the hot gas evaporator systems that come standard on most remote condenser machines.

Its quiet operation and efficient remote condenser design make this machine perfect for hotels, bars, restaurants, buffets, and any other establishment that needs to control ambient noise and temperature for customer and employee comfort. It comes with state-of-the-art ice production technology, including a self-diagnostic system that provides 24-hour preventative maintenance, and programmable ice making options that allow you to produce ice by scheduled time or ice volume. It can make up to 816 lb. of half size dice cube ice per day, and controlling that production is made simple thanks to the EasyRead display. This eye-catching, illuminated display communicates operating statuses, cleaning reminders, and asset information to your staff through an easy-to-use, button-operated interface.

- QuietQube ice machine / condenser system uses CVD technology to increase efficiency, lower ambient temperature, and limit distracting noises

- Easy-to-clean food zone with removable water trough, distribution tube, curtain, and sensing probes

- Select components made from AlphaSan antimicrobial material for increased food safety

- DuraTech exterior fights corrosion and resists fingerprints and dirt

- This unit requires a 115V electrical connection

Overall Dimensions:
Left to Right: 30"
Front to Back: 24 1/2"
Height: 26 1/2"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents: Prop 65 Warning

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • CE Listed

    CE Listed

    This item complies with the standards imposed by the Conformance European (CE), a division of the Intertek group.

  • Energy Star Qualified

    Energy Star Qualified

    This item has been Energy Star Qualified by the US Environmental Protection Agency and the US Department of Energy, making it an energy-efficient product.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • ARI / AHRI

    ARI / AHRI

    This certification is awarded by the Air-Conditioning, Heating, and Refrigeration Institute to denote products of exceptional performance.

  • Hardwired

    Hardwired

    This product must be hardwired; it does not plug into a standard wall outlet.

Resources and Downloads for
Manitowoc Ice IYF0900C-161

Spec Sheet Specsheet Manual Manual Instructions Instructions Manitowoc Ice Warranty Warranty Idigo Brochure Brochure

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Equivalent Items

Manitowoc Ice IY0976C (Formerly)

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register